• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.250-250
• /
• 2017

Studies were conducted to select the optimum sowing date and planting density of sesame in the middle area of Korea. To select the optimum sowing date, sesame seeds sowed from 20 April to 7 July with 15-day intervals. To select the optimum planting density, sesame seeds investigated under four different planting distances ($30{\times}10,\;30{\times}15,\;30{\times}20$, and $30{\times}25cm$)respectively in the experimental field. As seeding date was delayed, days to emergence were shortened flowering and maturing date were delayed. Delayed sowing date resulted in decreased length, capsule setting stem length and number of capsules, and branchs per plant. Number of Capsules was high sowing date on 5 May in the range of 90~95ea/plant in sesame. Also yield of sesame seeds was most high on 5 May in the range of 142kg/10a by sowing date. Sowing date up to 5 May showed no effect on grain yield, but from 5 June to 5 July decreased 27%, 68% and 86%, respectively. For all planting distances, weight of 1,000 grain was not significantly different. However, number of branches and capsules tended to increase. Number of Capsules was high planting distance of $30{\times}20cm$ and $30{\times}25cm$ in the range of 146.7~165.7ea/plant in the Geonbaekkae. Areumkkae also showed the same tendency on planting distance of $30{\times}20cm$ and $30{\times}25cm$ in the range of 122.0~147.5ea/plant, respectively. Yield of Geonbaekkae and Areumkkae seeds was most high 116kg/10a, 117kg/10a, respectively on planting distance $30{\times}20cm$. Decreased in the planting distance of sesame has increased the incidence of disease and lodging. Based on the results, we suggest a planting distance of $30{\times}20cm$ maximal growth and yield of sesame in the middle area of Korea. Considering growth characteristics, sesame yield ability, the optimum sowing date was 5 May and optimum planting pattern was founded to be two rows planting in one ridge and planting densities was $30{\times}20cm$.

• 한국작물학회지
• /
• 제41권2호
• /
• pp.215-222
• /
• 1996

경장이 뚜렷이 다른 검정콩 2계통에 대하여 트렉터 부착 세조파기를 이용한 조파시 재배시기 및 파종밀도 차이가 생육 및 수량특성에 미치는 영향을 검토코자 하였다. 공시품종은 중경종인 검정콩 001와 단경종인 수원 157호이었고, 파종은 5월 21일과 6월 19일에 트렉터 부착 세조파기를 이용하여 조파하였다. 파종밀도는 m$^2$당 8.3본(60$\times$20cm), 11.0본(60$\times$15cm), 16. 7본(60$\times$l0cm), 22. 0본(60$\times$7.5cm), 33.0본(60$\times$5cm)등 5처리를 두었다. 1. 수량 구성요소와 수량에서 중경종인 검정콩001는 적만파간 파종밀도 반응이 비슷한 경향이었으나 단경종인 수원157호는 적만파간 파종밀도 반응이 다르게 나타났다. 2. 생육, 수량구성요소 및 수량에서 파종기와 품종, 파종기와 파종밀도와의 상호작용은 대부분의 형질에서 유의성이 인정되었으나 품종과 파종밀도와의 상호작용은 유의성이 없었다. 3. 도복과 수량에서 검정콩001는 만파적응성이 $\lrcorner$높았고, 수원157호는 적파적응성이 높았다. 4. 재배시기와 파종밀도 차이에 따른 변이가 높은 형질은 경장, 분지수, 개체당 입수, 수량 등이였고 변이가 낮은 형질은 주경절수, 협당립수, 100립중 등이었다.

• 전자공학회논문지A
• /
• 제30A권2호
• /
• pp.46-52
• /
• 1993

The estimation of yield for semiconductor devices requires not only establishment of critical area but also a new parameter of process defect density that contains inspection mean defect density related cleanness of manufacure process line, minimum feature size and the total number of mask process. We estimate the repaired yield of memory devide, leads the semiconductor technique, repaired by redundancy scheme in relation with defect density distribution function, and we confirm the repaired yield for different devices as this model. This shows the possibility of the yield estimation as statistical analysis for the condition of device related cleanness of manufacture process line, design and manufacture process.

• 한국작물학회지
• /
• 제38권2호
• /
• pp.112-116
• /
• 1993

우리나라에 자생하는 양하의 인공재배시 지하경의 키기와 피복재료가 주요생육 형질과 수량에 미치는 영향을 구명하고자 시험을 실시한 결과를 요약하면 다음과 같다. 1. 지하경이 클수록 출현이 빠르고 생육이 양호하였으며 9월 하순경 개화되었다. 2. 지하경 크기는 12～15cm에서 초장이 크고, 화뢰엽수가 많아 대량번식시킬 때 가장 알맞은 키기로 사료된다. 3. 멀칭은 짚피복이 초장이 크고 엽수가 많아 생육이 양호하고 화뢰수와 화뢰중이 무거워 수량이 증수되었다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2000년도 춘계임시총회 및 학술발표대회
• /
• pp.34-37
• /
• 2000

To determine the optimum planting density in Alisma plantago in the southern areas of Korea, Alisma plantago local cultivar was grown under different planting density. The plant height, number of stems and diameter of root were 30cm, 12 and 3.4mm respectively on the planting density, row 20cm $\times$ intrarow 35cm. The fresh yield of root and dry yield of root were 261.2Kg110a, 211.5Kg/10a respectively on the planting density, row 20cm x intrarow 35cm. Therefore, the proper planting density for high yield bumper crop of Alisma plantago for exporting to Japan is planting density with row 20cm $\times$ intrarow 35cm.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1614-1618
• /
• 2008

본 논문은 레이아웃 수정에 따른 수율차 계산을 위한 새로운 모델을 제안한다. 패턴 사이의 빈 공간의 크기를 늘리거나 줄이는 레이아웃 변경으로 인한 결함 평균치의 차를 구하기 위한 식이 단락 결함과 개방 결함에 대해 제시 되었다. 미세 패턴인 조그를 포함한 구부러진 연결선등을 가지는 복잡한 레이아웃 변경은 패턴을 작은 조각으로 쪼개고 패턴 사이의 공간과 패턴의 폭을 재정의 함으로써 새롭게 모델링 하였다. 이 모델은 레이아웃 변경에 의한 수율 변화와 결함 제한적 수율에 대한 비용함수 모니터링을 쉽게 할 수 있다는 장점을 갖는다.

• 한국연초학회지
• /
• 제10권2호
• /
• pp.99-107
• /
• 1988

Pot experiment was conducted to find out the effect of lime application on yield and chemical composition of burley tobacco in 1986, Lime increased exchangeable calcium and pH of soil, but decreased Al, Fe and Mn concentrations. Yield was increased by lime application, however lime could not be caused to yield increasing in the soil with high calcium contents. Cored leaves of limed Plot contained higher Mg. K, total nitrogen, NO3-nitrogen, water soluble and insoluble ash, alkalinity number of water soluble and insoluble ash, citric and malic acid, but lower Fe, Mn, protein-nitrogen, NH3-nitrogen, nicotine petroleum ether extract, palmitic and linolenic acid concentrations than those of unlined plot. The linoleic acid and volatile neutral constituents of cured leaves were not affected by liming. Lime increased yield, however it did not affect leaf duality in respect to chemical characteristics, suggesting that liming should be necessary for tobacco cultivation.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1271-1280
• /
• 2020

The yield and quality of a micromanufacturing process are important management factors. In real-world situations, it is difficult to achieve a high yield from a manufacturing process because the products are produced through multiple nanoscale manufacturing processes. Therefore, it is necessary to identify the processes and equipment that lead to low yields. This paper proposes an analytical method to identify the processes and equipment that cause a defect in the plastic ball grid array (PBGA) during the manufacturing process using logistic regression and stepwise variable selection. The proposed method was tested with the lot trace records of a real work site. The records included the sequence of equipment that the lot had passed through and the number of faults of each type in the lot. We demonstrated that the test results reflect the real situation in a PBGA manufacturing process, and the major equipment parameters were then controlled to confirm the improvement in yield; the yield improved by approximately 20%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권5호
• /
• pp.611-617
• /
• 2009

This study was aimed at a genetic evaluation of Iranian Holstein cattle for milk and fat yields and calculating daughter yield deviation (DYD) of bulls. The data file that was used in this research included 367,943 first three lactation records of 186,064 Holstein cows which calved between 1983 and 2006 in 11,806 herd-year-season groups. The model included herd-year-season of calving and age at calving as fixed effects and animal and permanent environment as random effects. Mean breeding values of cows for each year were regressed on birth year to estimate genetic trends. Genetic trends in milk and fat yields were greater for cows born after 1997 (59.38 kg/yr and 1.11 kg/yr for milk yield and fat yield, respectively). Animal evaluations were partitioned into contribution from parent average, yield deviation (YD) and progeny. DYD of bulls was calculated as described by VanRaden and Wiggans (1991). DYD provides an indication of the performance of the daughters of a bull without consideration of his parents or sons. Variance of bull DYD was greater than variance of their predicted transmitting ability (PTA). Correlation of bull DYD and PTA was dependent on the number of daughters and when this increased, the correlation of DYD and PTA was increased. Also as lactation number of daughters increased, the correlation of bull DYD and PTA was increased.

• Earthquakes and Structures
• /
• 제3권2호
• /
• pp.141-168
• /
• 2012

The Retrofit Yield Spectrum (RYS) is a new spectrum-based device that relates seismic demand of a retrofitted structure with the fundamental design parameters of the retrofit. This is obtained from superposition of Yield Point Spectra with design charts that summarize in pertinent spectrum-compatible coordinates the attributes of a number of alternative retrofit scenarios. Therefore, once the requirements for upgrading a given structure have been determined, the RYS enable direct insight of the sensitivity of the seismic response of the upgraded structure to the preliminary design decisions made while establishing the retrofit plan. By virtue of their spectrum-based origin, RYS are derived with reference to a single mode of structural vibration; a primary objective is to control the contribution of this mode in the retrofit design so as to produce a desirable distribution of damage at the ultimate limit state by removing soft storey formations and engaging the maximum number of structural members in deformation, in response to the input motion. Calculations are performed with reference to the yield-point, where secant stiffness is proportional to the flexural strength of reinforced concrete members. Derivation and use of the Retrofit Yield Spectra (RYS) refers to the seismic demand expressed either in terms of spectral acceleration, spectral displacement or interstory drift, at yield of the first storey. A reinforced concrete building that has been tested in full scale to a sequence of simulated earthquake excitations is used in the paper as a demonstration case study to examine the effectiveness of the proposed methodology.