• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.1
• /
• pp.66-77
• /
• 1993

The experiment reported here was conducted at Suweon and Sunghwan. to evaluate desirable agronomic characteristics, forage yield and quality of nine introduced oat (Avena sativa L.) cultivars in comparison with the control cultivar Cayuse during the fall and spring seasons for three years. Speed oat and G-sprinter showed earlier in maturity than the control cultivar Cayuse, but Taiho, Zenshin and Almighty were recorded as late types. Taiho, Hay oat and Swallow tended to more lodging than the control cultivar under rainy growing conditions and Taiho, Zenshin and Hay oat were more susceptible to barley yellow dwarf virus among the cultivars tested. At Suweon, the early type cultivars Speed oat and G-sprinter significantly outyielded the control cultivar Cayuse over the 3 years of the fall experiment, but no significant forage yield was found between the early type cultivars and the control in the spring experiment except for 1991 At Sunghwan, the early type Speed oat and late types Almighty and Zenshin significantly outyielded the control in the fall experiment of 1991, but the 3 years of experiment showed no significant difference in the forage yield of oat cultivars in the spring experiment. Over the 3 years of the fall and spring experiments at both Suweon and Sunghwan. the crude protein (CP) content and in vitro dry matter digestibility (IVDMD) of the early types Speed oat and G-sprinter were lower than those of the control and late types, but the acid detergent fiber (ADF) and neutral detergent fiber (NDF) contents of the early types Speed oat and G-sprinter were slightly higher than those of the control and late types. Results of this experiment indicate that the early type oat cultivars tended to higher forage yield than the late types when sown in the fall, but no cultivar differences in dry matter yield were found when sown in the spring.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.88-91
• /
• 2014

In this study, oil as a source of biodiesel from Nannochloropsis oceanica was extracted using organic solvent. The oil extraction yield and efficiency from dry and wet microalgae were investigated. The initial fatty acids content of the N. oceanica was 317.8 mg/g cell showing a high oil content over 30%. The yield from dry microalgae was higher than that from wet microalgae due to the inhibition of water. The yield by chloroform-methanol was the highest and the yield by hexane was the lowest. However, the total fatty acids contents with the chloroform-methanol were 678.7 and 778.2 mg/g oil under dry and wet conditions, respectively. The high oil extraction yield by chloroform-methanol reflected the fact that the extracted oil contained a high level of impurity. The hexane-methanol extraction from dry N. oceanica showed high oil extraction efficiency, 82.6%. The chloroform-methanol extraction under wet condition also showed high efficiency, 88.0%. While the hexane-methanol extraction from dry microalgae is desirable under low drying cost, the chloroform-methanol extraction from wet microalgae is desirable under high drying cost.

• Animal Bioscience
• /
• v.35 no.8
• /
• pp.1258-1269
• /
• 2022

Objective: For improving meat quality especially tenderness, male cattle are usually castrated to removes both the testicles. This study was conducted to evaluate the effect castration method (half- and complete-castration) on meat yield and quality characteristics of Hanwoo male cattle. Methods: Thirty-two similar age (5.9 months) Hanwoo male calves were divided into: half-castration (HC) and complete-castration (CC) groups (n = 16 per group). At 7 months of age, all the animals were castrated in which the HC calves had only one testicle surgically removed while, the CC calves had both testicles surgically removed. The castrated animals were reared under identical conditions until 25 months of age. After slaughter, the carcasses were evaluated for carcass traits and meat yield of primal cuts. For examination of the castration effect on meat quality, L. lumborum and semimembranosus muscles were used. The meat samples were analyzed for chemical composition, color, pH, shear force and water holding capacity, fatty acids, metabolites and volatile aroma compounds. Results: The HC group showed higher meat yields of all primal cuts (p<0.05). As a result, the total meat yield was higher by approximately 44 kg in the HC group (303.32 kg, corresponding to 67.88%) compared to the CC group (259.30 kg, corresponding to 62.11%) (p<0.05). In terms of meat quality, the HC resulted in two times greater fat content in both muscles examined compared to intact males. More importantly, the shear force values did not differ between HC and CC groups for L. lumborum muscles (p>0.05). The meat from HC animals exhibited higher amount of free amino acids associated with sweetness (p<0.05). Furthermore, the castration method only exhibited a negligible effect on metabolites and volatile aroma compounds in the cooked meat. Conclusion: Half-castration emerged as an alternative practice to be used for increasing the yield and tenderness of male cattle meat.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.84-84
• /
• 2022

The limit of crop cultivation is moving northward due to the temperature rise by climate change. There is a problem with crop growth if early sowing is performed at a time when the temperature is low. It is difficult to secure crop productivity and cultivation stability due to the low temperature and short cultivation period. Therefore, this study was conducted to analyze the change in growth characteristics and yield of corn for grain when early sowing is performed in central region of South Korea. This experiment was conducted at experimental field of Suwon in 2021. Three varieties of corn for grain such as Kwangpyeongok, Sinhwangok, and Hwangdaok were sown at intervals of 5 days from 20 March to 15 April. The planting density at this time was sown with a row interval of 70 cm and a plant interval of 25 cm. Nitrogen, phosphoric acid, and potassium fertilizers were applied at 17.4 kg, 3.0 kg, and 6.9 kg per 10a, respectively. Phosphoric acid and potassium fertilizers were all applied before sowing and nitrogen fertilizer was applied 50% before sowing and 50% in the fifth leaf period. The corn growth characteristics and yield components were investigated. The seedling establishment rate by sowing date was in the range of 68.5~88.5%, and it showed a difference depending on the variety. The range of days from sowing to tassel and silk emergence by sowing date was 79.9~98.4 and 81.0~98.9 days, respectively. As the sowing date was delayed, the days from sowing to tassel and silk emergence decreased. The growth characteristics and yield of corn by sowing date are as follows. Plant height was the highest at 241.3 cm at the sowing on 25 March, and Stalk diameter was the thickest at 25.6 mm at the sowing on 31 March. The fresh weight per plant was the highest at 728 g at the sowing on 25 March, and the dry weight per plant was the highest at 185 g at the sowing on 31 March. Corn growth characteristics did not show a certain trend depending on the sowing date, and corn growth was more vigorous at the sowing on March 25 and 31 than the others. In the case of ear weight, it was the heaviest with 344 g at the sowing on 25 March, and filled ear length ratio showed a tendency to decrease as the sowing time was delayed. The weight of 100 grains and grain yield per 10a of maize were the highest at 36.0g and 878.7kg/10a, respectively at the sowing on 25 March. Although the growth and yield of corn for grain were good during early sowing in the central region of South Korea, it is necessary to investigate the limit temperature for early sowing of corn by examining the annual variation according to weather conditions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.1
• /
• pp.6-13
• /
• 2024

This study was conducted to determine the optimal spring seeding dates for alfalfa yield and feed value. The experiment was conducted annually for three years (2021~2023) at the field in the Department of Animal Resources Development, NIAS, located in Cheonan. The treatments involved six seeding dates ranging from February 24 to April 14, with 10days intervals. Alfalfa was harvested four times a year at the early flowering stage. Dry matter yield showed a tendency to decrease with delayed the seeding date. However, depending on the climatidc condisions in the seeding year, the dry matter yield on March 14 or 24 was comparable to that on February 24. Annual dry matter yield varied, influenced by the daylight conditions each year. The average feed value did not significantly differ within in the same year with delayed seeding dates (p>0.05). Therefore, the most stable period for alfalfa spring seeding in the central area of South Korea is considered to be from February 24 to April 4, with February 24 indentified as the optimal date.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.168-168
• /
• 2022

According to the 5th Climate Change Report, global average temperature in 2081~2100 will increase 1.8℃ based on RCP 4.5 and 3.7℃ based on RCP 8.5 from the current climate value (IPCC Working Group I AR5). As temperature is expected to increase due to global warming and the intensity and frequency of rainfall are expected to increase, damage to crops is expected, and countermeasures must be taken. This study intends to evaluate rice growth in terms of nitrogen utilization efficiency according to future climate change conditions. In this experiment, Oryza sativa cv. Shindongjin were planted at the SPAR facility of the NICS in Wanju-gun, Jeollabuk-do on June 10, and were planted and grown according to the standard cultivation method. Cultivation conditions are high temperature, high CO₂ (current temperature+4.7℃·CO₂ 800ppm), high temperature (current temperature+4.7℃·CO₂ 400ppm), current climate (current tempreture·CO₂ 400 ppm). Nitrogen was varied as 0, 9, 18 kg/10a. The N content and C/N ratio of all rice leaves, stems, and seeds increased at high temperature, and the N content and C/N ratio decreased under high temperature and high CO₂ conditions com pared to high temperature. Compared to the current climate, NUE increases by about 8% under high temperature and high CO₂ conditions and by about 2% under high temperature conditions. This seems to be because the increase in temperature and CO₂ induced the increase in biomass. ANUE related to yield decreased by about 70% compared to the current climate under high temperature conditions, and decreased by about 45% at high temperature and high CO₂, showing a tendency to decrease compared to high temperature. This appears to be due to reduced fertility and poor ripening due to high temperature stress. However, as the nitrogen increased, the number of ears and the number of grains increased, slightly offsetting the production reduction factor.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.13-13
• /
• 2022

Recently, stable crop production is threatened by the effects of climate change. In particular, it is difficult to consistently maintain agricultural policies due to large price fluctuations depending on the difference in total domestic rice production from year to year. For stable rice production amid changes in the crop growing environment, development of varieties with improved disease resistance and abiotic stress stability is becoming more important. In here, drought and cold tolerant trait have been studied. First, for the development of drought tolerant varieties, we analyzed which agricultural traits are mainly affected by domestic drought conditions. As a result, it was observed that drought caused by the lack of water during transplanting season inhibits the development of the number of tiller and reduces the yield. 'Samgang' was selected as a useful genetic resource with strong drought tolerant and stable tiller number development even under drought conditions by phenotype screening. Three of drought tolerant QTLs were identified using doubled haploid (DH) population derived from a cross between Nacdong and Samgang, a drought sensitive and a tolerant, respectively. Among these QTLs, when qVDT2 and qVDTl1 were integrated, it was investigated that the tiller number development was relatively stable in the rainfed paddy field conditions. It is known that the high-yielding Tongil-type cultivars are severely affected by cold stress throughout the entire growth stage. In this study, we established conditions that can test the cold tolerance phenotype with alternate temperature to treat low temperatures in indoor growth conditions similar to those in field conditions at seedling stage. Three cold tolerant QTLs were explored using population derived from a cross between Hanareum2 (cold sensitive variety, Tongil-type) and Unkwang (cold tolerant variety, Japonica). Among these QTLs, qSCT12 showed strong cold tolerant phenotype, and when all of three QTLs were integrated, it was investigated that cold tolerant score was relatively similar to its donor parent, Unkwang, in our experimental conditions. We are performing that development of new variety with improved cold tolerant through the introduction of these QTLs.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.5
• /
• pp.318-322
• /
• 1997

In order to isolate a microorganism having preferential degradation of D-carnitine from DL-carnitine, a bacterium assimilating D-carnitine as a sole carbon and energy source was isolated from soil by enrichment culture and partially identified as Enterobacter sp. Also, a mutant having lessened L-carnitine decomposition rates was selected with nitrosoguanidine mutagenesis, which led to decrease the specific activities of carnitine dehydrogenase (7.6-fold) and ${\beta}$-hydroxybutyrate dehydrogenase (9.5-fold) as compared to the wild strain. Meanwhile, optimal culture conditions for optical resolution of DL-carnitine were investigated. Under optimal conditions, 3.53 g/l L-carnitine was obtained from 20 g/l DL-carnitine, which corresponded to 35.3% L-carnitine yield and 97.9% optical purity.

• Journal of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.171-175
• /
• 1969

This study wa attempted to extract the Potash-Ammonia Fertilyzer in most satisfactory yield from the Uncalcinecl Domestic Alunite ore applying an optimal reaction conditions (Ammonia water concentration and applicable reaction pressure, etc.), it was found that almost all amount of $K_2SO_4$ was extracted in the forms of $K_2SO_4·(NH_4)_2SO_4$mixture under such conditions. The experimental data to note are as follows: 1. The optimal pressure applied to the reaction was 600 to 700 Psig. 2. The optimal concentration of Ammonia water was 7 Mol/L. 3. The reaction time needed was 3 hours. 4. The extraction rate and degree were not at variance with sorts and occurrences of Alunite ore.

• Mass Spectrometry Letters
• /
• v.6 no.1
• /
• pp.21-25
• /
• 2015

In this paper, I describe the importance of matrix spraying conditions in imaging mass spectrometry (IMS) to obtain successful imaging results. My developed matrix application methodology, which is a "two-step matrix application" sequentially combined with matrix sublimation and spraying matrix solution can provide high reproducibility and high ion yield compared with a conventional direct spraying method. However, insufficient IMS results were obtained occasionally despite the two-step method. Therefore, I wanted to characterize the methodology to continuously provide high quality data. According to my results, the sublimation time was not a strict parameter, and the most important step was the first spraying condition. This means that the extraction conditions from the tissue section and co-crystallization of the matrix were the most important factors.