• Korean journal of applied entomology
• /
• v.49 no.1
• /
• pp.43-47
• /
• 2010

This study was conducted to investigate optimal conditions for formation of synnemata from Beauveria bassiana. The strain of B. bassiana was isolated from a host of Oncotympana fuscata in Halla mountain of Jeju island. The yield of synnemata was the highest at application of brown rice (90%) and silkworm pupae (10%) media. On the other hand, the other media did not result in formation of synnemata. The highest formation of synnemata was achieved at conditions of moderate air inflow and $20^{\circ}C$. The optimal moisture and light intensity for formation of synnemata were 60% and 300 lux, respectively. In addition, inoculation of the liquid spawn resulted in higher yield than that of asexual spore.

• Food Science of Animal Resources
• /
• v.30 no.1
• /
• pp.42-48
• /
• 2010

This research was conducted to evaluate the effects of cooking conditions on quality characteristics of Soo-Yuk, a traditional Korean food. The cooking conditions were as follows: boiled until the core temperature of a sample in $20^{\circ}C$ cold water reached at $75^{\circ}C$ (T1); boiled until the core temperature of a sample in $90^{\circ}C$ boiling water reached at $75^{\circ}C$ (T2); and boiled with sample from $20^{\circ}C$ to $100^{\circ}C$ and kept at $98^{\circ}C$ for 25 min (T3, Korean traditional method). The sample cooked at $90^{\circ}C$ water (T2) had the fast cooking time, and the highest cooking yield and moisture content. Soo-yuk boiled in $100^{\circ}C$ water (T3) showed the longest cooking time, the lowest cooking yield and moisture content, and the highest shear force. The instrumental color showed a significant difference among the cooking conditions. The sarcomere length of soo-yuk boiled in $100^{\circ}C$ water (T3) was the shortest, but the myofibrillar fragmentation index and thiamine content of the sample cooked at $90^{\circ}C$ (T2) were the highest. In sensory evaluation, the evaluation of soo-yuk boiled in $98^{\circ}C$ water (T3) was of superior flavor and overall acceptability.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.9
• /
• pp.39-51
• /
• 2015

various soil conditions as its application to foundation retrofit works has increased. However, most of the domestic researches focused mainly on bearing behavior of Case-I and Case-II type micropiles, whereas structural verification research was insufficient in relation with bulking behavior in particular. In this respect, this study was perfomed to understand the critical buckling characteristics of micropiles under axial load with various steel bars and grout conditions. As a result, it was found that a critical buckling shear strength of a micropile increases for smaller diameter micropile and a critical buckling load decreases with a longer length in the condition under the critical buckling length. Also, a method to evaluate a buckling possibility and yield behavior under axial compressive load conditions is proposed.

• KSBB Journal
• /
• v.25 no.3
• /
• pp.251-256
• /
• 2010

A novel method to prepare polyester from wastepaper through liquefaction and crosslinking stages was studied. At the first stage, the liquefaction of wastepaper was carried out in the presence of ethylene glycol under acidic conditions. The factors that affect on liquefaction yield were found to be reaction time, temperature, and acid concentration, and their ranges were 60~120 minutes, $150{\sim}170^{\circ}C$, and 2~4%, respectively. The optimum condition was found to be 100 minutes, $160^{\circ}C$, and 3% sulfuric acid concentration, and the liquefaction yield at this condition was 67%. At the second stage, polyester was prepared from the liquefied wastepaper obtained at the optimum liquefaction condition by crosslinking with succinic anhydride. The effect of reaction time and carboxylic group/hydroxyl group ratio on crosslinkage were investigated at conditions covering 30~50 minutes of reaction time and 1.5~2.5 of carboxylic group/hydroxyl group ratio. The crosslinkages of polyester prepared were 80~90%, which were almost same regardless of reaction conditions.

• Composites Research
• /
• v.12 no.4
• /
• pp.42-54
• /
• 1999

FMLC(Fiber-Metal Laminate Composites) is a new structural material combining thin metal laminate with adhesive fiber prepreg, it nearly include all the advantage of metallic materials, for example: good plasticity, impact resistance, processibility, light weight and excellent fatigue properties. This research studied the optimum design of the FMLC subject to various loading conditions using genetic algorithm. The finite element method based on the shear deformation theory was used for the analysis of FMLC. Tasi-Hill failure criterion and Miser yield criterion were taken as fitness functions of the fiber prepreg and the metal laminate, respectively. The design variables were fiber orientation angles. In genetic algorithm, the tournament selection and the uniform crossover method were used. The elitist model was also used to be effective evolution strategy and the creeping random search method was adopted in order to approach a solution with high accuracy. Optimization results were given for various loading conditions and compared with CFRP(Carbon Fiber Reinforced Plastic). The results show that the FMLC is more excellent than the CFRP in point and uniform loading conditions and it is more stable to unexpected loading because the deviation of failure index is smaller than that of CFRP.

• Composites Research
• /
• v.14 no.3
• /
• pp.42-50
• /
• 2001

Modeling of damage initiation in singly oriented ply (SOP) Fiber Metal Laminate (FML) under concentrated loading conditions was studied. The finite element method (FEM) base on the first order shear deformation theory is used for th\ulcorner modeling of damage initiation in SOP FML. The failure indices (FI) of the fiber prepreg and the metal laminate were calculated by using the Tasi-Hill failure criterion and the Miser yield criterion, respectively. To verify the present method, the failure analysis was conducted under uniaxial loading and cylindrical bending, then the analysis under concentrated load was conducted. The results show that the analysis is reasonable. An indentation test was conducted to compare a damage initiation load with a calculated FI. The test was conducted under two side clamped conditions to study the fiber orientation effect. Indentation curve was fitted using the Hertz equation and a damage initiation load is defined that the point which deviate the fitted curve from the real indentation curve. The damage initiation loads were obtained under various fiber orientations and compared with calculated FIs. The experiment was well matched with calculated FI. This results shows that the present method is suitable for the damage initiation modeling of SOP FML.

• The Plant Pathology Journal
• /
• v.34 no.3
• /
• pp.171-181
• /
• 2018

Fruit rot is the principal phytopathological problem of pipiana pumpkin (Cucurbita argyrosperma Huber) in the state of Guerrero. The aims of this research were to 1) identify the causal agent of southern blight on pumpkin fruits by morphological, pathogenic, and molecular analysis (ITS1, 5.8S, ITS2); 2) evaluate in vitro Trichoderma spp. strains and chemical fungicides; and 3) evaluate under rainfed field conditions, the strains that obtained the best results in vitro, combined with fungicides during two crop cycles. Number of commercial and non-commercial fruits at harvest, and seed yield ($kg\;ha^{-1}$) were registered. Morphological, pathogenic and molecular characterization identified Sclerotium rolfsii as the causal agent of rot in pipiana pumpkin fruits. Now, in vitro conditions, the highest inhibition of S. rolfsii were obtained by Trichoderma virens strain G-41 (70.72%), T. asperellum strain CSAEGro-1 (69%), and the fungicides metalaxyl (100%), pyraclostrobin (100%), quintozene (100%), cyprodinil + fludioxonil (100%), and prochloraz (100%). Thiophanate-methyl only delayed growth (4.17%). In field conditions, during the spring-summer 2015 cycle, T. asperellum strain CSAEGro-1 + metalaxyl, and T. asperellum + cyprodinil + fludioxonil, favored the highest number of fruits and seed yield in the crop.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.3
• /
• pp.442-450
• /
• 2015

Climate temperature affects animal production. This study was conducted to evaluate whether climatic conditions affect beef carcass characteristics of Korean cattle steers. The monthly carcass characteristics of Korean cattle steers (n = 2,182,415) for 8 yr (2006 through 2013) were collected from the Korean Institute for Animal Products Quality Evaluation. Daily climate temperature (CT) and relative humidity (RH) data were collected from the Korean Meteorological Administration. Weather conditions in South Korea during summer were hot and humid, with a maximum temperature of $28.4^{\circ}C$ and a maximum RH of 91.4%. The temperature-humidity index (THI), calculated based on CT and RH, ranges from 73 to 80 during summer. Winter in South Korea was cold, with a minimum temperature of $-4.0^{\circ}C$ and a wind-chill temperature of $-6.2^{\circ}C$. Both marbling score (MS) and quality grade (QG) of Korean cattle steer carcasses were generally best (p<0.05) in autumn and worst in spring. A correlation analysis showed that MS and QG frequencies were not associated (p>0.05) with CT. Yield grade (YG) of Korean cattle steer carcasses was lowest (p<0.05) in winter (November to January) and highest in spring and summer (May to September). A correlation analysis revealed that YG frequency was strongly correlated ($r{\geq}0.71$; p<0.01) with CT and THI values. The rib eye area, a positive YG parameter, was not associated with CT. Backfat thickness (BT), a negative YG factor, was highest in winter (November and December). The BT was strongly negatively correlated ($r{\leq}-0.74$; p<0.01) with CTs. Therefore, the poor YG during winter is likely due in part to the high BT. In conclusion, YG in Korean cattle steer carcasses was worst in winter. QGs were not associated with winter or summer climatic conditions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.221-221
• /
• 2017

This experiment was performed to analyze variation of growth traits of soybean to determine the information of less sensitive traits under different environmental conditions. Sowing was carried out on June 2 each year and the experimental plot was laid out in three replicates by randomized complete block design with thirty soybean varieties which consisted of 19 cultivars for beancurd and soypaste, 8 cultivars for soy-sprout including 1 landrace, and 3 cultivars for cooking with rice including 1 landrace during the period 2014-2015. The weather conditions during the experimental period were quite different with extremely low precipitation and longer sunshine duration in 2015 than 2014. The variation of characteristics related to growth period such as days of growth, days of maturity, days of flowering and the 100-seed weight was less in spite of different environmental conditions. While the variation of the number of pods per plant was high. Considering growth and seed characteristics like the number of pods per plant, the number of seeds per pod and 100-seed weight which are linked directly to the yield, cultivars such as Shingi, Daewonkong, Danbaegkong, and Daepung for beancurd and soypaste, Pungwon, Haepum and Shingang for soy-sprout and Seoritae for cooking with rice were more stable and could be expected to have high yield in Suwon, the south-central part of South Korea. These results could be useful for the selection of breeding resources to develop cultivars with high stability under changeable weather condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.4
• /
• pp.436-444
• /
• 2016

Clamshells, which comprise more than 50% of a clam’s weight, are a major byproduct of the clam industry and are mainly composed of insoluble calcium carbonate. This study investigates the use of clamshells as a natural calcium resource. Highly soluble powdered calcium lactate (LCCL) was prepared from the calcined powdered shells of littleneck clams (LCCP) using response surface methodology (RSM) to predict optimum conditions. These conditions, as derived from pH, solubility, and yield of 11 LCCLs manufactured according to the RSM model, were 1.80 M lactic acid and 1.13 M LCCP. The actual values of pH (6.98), solubility (93.99%), and yield (351.23%) under the optimized conditions were as predicted. The derived LCCL exhibited a strong buffering capacity in the range of pH 2.78-3.90 when combined with less than 2 mL of 1 N HCl. The ranges of calcium content and solubility of LCCL were 7.7-17.5 g/100 g and 96.6-98.9%, respectively. Fourier transform infrared spectroscopy (FT-IR) of the LCCL identified it as calcium lactate pentahydrate, and field emission scanning electron microscopy (FESEM) revealed an irregular and rod-like microstructure. These results confirm the potential use of clamshells, converted to highly soluble organic acid calcium, as an additive to enhance calcium content in food ingredients.