• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.2
• /
• pp.58-63
• /
• 1980

Three seasme cultivars were compared in viewpoints of ripening developments and yielding potentials per plant after the flowering date. On this study, timely ripening and yielding developments were checked separately with capsules and seeds which outcome from the flowers labelled at 30th of July, the maximum flowering stage. Mostly, size and dry weight developments were estimated and the results obtained are as follows; 1. "Early Russian" was recognized as an ideal cultivar with large sized capsule and high lipid contents. However, under the enough ripening periods and ripening conditions (temperature, lights, and nutrients, etc.), the cultivar has weakness on the capsule developments which is competed with seed developments as mean of sink concern. 2. "Suwon 5" was a high yielding cultivar under the proper ripening weather (F. ex. southern districts), but under the unfavorable ripening conditions the cultivar may have weakness of rapid yield decrease by comparatively later formation of seed weight than the capsule. Especially the cultivar has the very ripening characteristics adapting to southern districts which have higher temperature and later low limiting stage for sesame ripening. 3. "Black colored native" seasme cultivar showed lower yielding and later ripening characteristics among others. Also, under the unfavorable ripening conditions, the cultivar has the weakness of yield decrease. Even under the favorable conditions, the cultivar will still have the weakness which is not able to increase in yield, because the capsule development would be finished in size and dry weight too early to accept the later developments of seeds.e later developments of seeds.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.532-540
• /
• 2021

Sodium dodecanoyl-4-oxybenzenesulfonate (DOBS) salt is a substance that exhibits effective bleaching and antimicrobial abilities at low temperatures. A mild and efficient synthesis method of DOBS starting from dodecanoyl chloride and sodium 4-hydroxybenzene sulfonate was investigated under alkaline conditions using a water (W)-polar aprotic solvent system. First, the reaction was carried out using only water as a solvent system with the variables of temperature and time. The yield was found to be as low as about 5% in most cases under the reaction conditions of more than 30 ℃ and 1 h. In order to develop an efficient solvent system, the effect on the yield of DOBS was evaluated in various solvent systems which were prepared by changing the type of polar aprotic solvents while mixing them with the water. A solvent system in which acetone (AC) and water were mixed showed the best yield and about 82 % under mild reaction conditions (30 ℃, 1 h and atmospheric pressure) was obtained. The prepared DOBS showed good bleaching and antimicrobial activities indicating that it could be used an excellent bleach activator.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.337-344
• /
• 2019

In this study, an antioxidant was extracted from Lonicera japonica and Sophora japonica L, which was optimized by using the central composite design (CDD) model of response surface methodology (RSM). The response value of CDC model establishes the extraction yield and the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity. The extraction time, volume ratio of ethanol/ultrapure water, and extraction temperature were selected as quantitative factors. According to the result of CDC, optimal extraction conditions of Lonicera japonica were as follows; the extraction time of 2.08 h, volume ratio of ethanol/ultrapure water of 41.53 vol.%, and extraction temperature of $55.08^{\circ}C$. At these conditions the expected results indicated that the yield and DPPH radical scavenging activity were estimated as 37.88 wt% and 40.37%, respectively. On the other hand, optimal extraction conditions of Sophora japonica L. could be found as the extraction time of 2.13 h, volume ratio of ethanol/ultrapure water of 62.89 vol.%, and temperature of $50.42^{\circ}C$. Under the conditions, the (possible) maximum values of yield and DPPH radical scavenging activity were found as 35.43 wt% and 55.7%, respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.5
• /
• pp.387-401
• /
• 2023

The Earth Pressure Balanced (EPB) Shield Tunnel Boring Machine (TBM) is widely employed for constructing urban underground spaces due to its minimal vibration and low noise levels. The injection of additives offers several advantages, including maintaining shield chamber pressure, reducing shear strength, minimizing cutter wear, and decreasing the permeability of the excavated soil. This technique is known as soil conditioning and involves the application of additives such as foam, polymer, and bentonite slurry. In this study, weathered granite soil commonly encountered at domestic tunnel sites was used as a soil specimen. Foam and polymer were applied as additives to assess the rheological properties of conditioned soils. The workability was evaluated through slump tests, while the rheological properties were assessed through laboratory pressurized vane shear tests conducted under the same conditions. Specially, the polymer was applied under specific conditions with low workability with high slump values, with the aim of evaluating the impact of polymer application. The test results revealed that with an increase in the Foam Injection Ratio (FIR), the slump value also increased, while the torque, peak strength, yield stress, apparent viscosity, and thixotropic area decreased. Conversely, an increase in the Polymer Injection Ratio (PIR) led to results opposite to those of FIR. Additionally, a correlation between the slump value and yield stress was proposed. When comparing conditions with only foam applied to those with both foam and polymer applied, even with similar slump values, the yield stress was found to be lower in the latter conditions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2000

The objectives of this study were to investigate weather conditions which induced discolored grains and viviparous germination, and to evaluate yield responses following viviparous germination during mid- and late- ripening stage, the submergence during reproductive growth stage, and lodging in the yellow ripe stage. Weather conditions which caused glume discoloration at heading stage were 21.3-26.4$^{\circ}C$ in average temperature, 75.2-98.4% in relative humidity, 19.3 in transpiration coefficient and 10.8-13.8 m/sec. in wind speed. Yield reduction was 26-27% and 10~17%, respectively, when the glume discoloration rates were 63.2-65.7% and 38.3-45.2%, obviously due to the decrease in percent of fertile grain and ripening ratio. Weather conditions during continuous rain for 7 days were 96% in relative humidity, 18.9$^{\circ}C$ in average temperature, 21.9$^{\circ}C$ in maximum temperature, and 16.8$^{\circ}C$ in minimum temperature, causing the most viviparous germination in Juanbyeo(45.5%), followed by Jinbubyeo(14.5%), Bongkwangbyeo(14.2%), and Obongbyeo(12.6%). Lateral tillers started to occur when the submergence at the depth of 1.5-2 m lasted one day during the reproductive growth stage. The submergence for 2-3 days at 3-4 m of water depth induced 269-571 lateral tillers/m$^2$, supporting 32-52% of the total yield. The rice yield in the paddy fields which were left under the lodging conditions until harvesting was not different compared to that of the paddy fields which were kept upright by tieing them together after lodging, but perfect grain ratio decreased about 9.1% in the transplanting culture and 12.5% in the direct seeding culture on dry paddy field because of the increase in immature grains.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.61-70
• /
• 2012

A construction project is very costly and takes a long time to make investment and yield profit. For this reason, financial institutions are cautious about financing construction projects. Meanwhile, a construction company needs financing from financial institutions to cover a large expense of a construction project. Thus, there is likely to be a close correlation between financing conditions and business operation of a construction company. To examine the relationship, variables were identified that are related to insolvency of a construction company and changes in financing conditions. The analysis period is between the second quarter of 2001 and the fourth quarter of 2010. Data was retrieved from TS2000 established by Korea Listed Companies Association (KLCA), Statistics Office, and Construction Economy Research Institute of Korea (CERIK). In terms of methodology, VECM (Vector Error Correction Model) was used to analyze dynamic relationship between changes in financing conditions and insolvency of a construction company based on the identified variables. The hypothesis was that changes in financing conditions would significantly affect business of a construction company, but, the analysis did not find a close relation between the two factors. However, it was shown that poor business of a construction company affects financing conditions adversely.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.689-701
• /
• 2011

The relations between ambient conditions and ice accretion shapes are quantitatively analyzed by employing self-organization maps and analysis of variance. Liquid water contents(LWC), mean volumetric droplet diameter(MVD), ambient temperature and free-stream velocity are chosen as ambient conditions which change ice accretion shapes. The parameters of ice accretion shape are selected as maximum thickness, icing limits, ice heading, and ice accretion area. Qualitative analysis was conducted by employing self-organization maps which show the qualitative relations between ice shapes and ambient conditions. The quantitative results of analysis of variance yield intensity of ambient conditions to the parameters of ice accretion shapes.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.4
• /
• pp.327-332
• /
• 1994

Optimum conditions for the production of acetoin and ammonia as the precursors of tetramethylpyrazine(TMP) were determined using Lactococcus lactis subsp. lactis biovar. diacetylactis FC1 in a modified Lactose-citrate broth containing galactose, citrate, and arginine. The cell growth and the productivity of acetoin and ammonia were remarkably increased in an aerobic culture with 10 $\mu M$ of hematin. For the optimum conditions of acetoin and ammonia production, the concentration of citrate and arginine were adjusted to 156 mM and 50 mM after 18 hr cultivation, and citrate and galactose to 156 mM and 50 mM after 36 hr cultivation, respectively. In these conditions, acetoin and ammonia were produced to the final concentration of 127 mM and 195 mM, which were the highest concentations, respectively. The optimum conditions of the TMP production were also determined as follows; 4 hours at 121, pH 8.3, and the maximal yield of TMP under these conditions was 0.81 g/l.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.355-361
• /
• 2011

The separation conditions for the enhancement of isoflavone contents in soybean by soaking and germination were developed, and the fermentation conditions of Chungkukjang were optimized by using response surface methodology analysis. The high-yield of isoflavone production was obtained when the conditions of soaking and gemination were at 25.6$^{\circ}C$, 7 hr and 29.1$^{\circ}C$, 42.4 hr, respectively. Total isoflavone contents in soybean (Daepung) by treatment were increased from 1,012 ppm to 1,912 ppm. Also, the optimum fermentation conditions of Chungkukjang were determined 39.96$^{\circ}C$, 1.32% (inoulum size) and 42.4 hr, respectively. Isoflavone contents in Chungkugjang under the optimum fermentation conditions were 1.3 times higher than the control (1,960 ppm).

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.905-917
• /
• 2023

The optimal fermentation conditions for producing fermented black soybeans rich in sulfur-containing amino acids were investigated. Response surface methodology monitored fermentation conditions. A central composite design examined the effect of independent variables: enzyme concentration (X₁) and fermentation time (X₂) on yield and methionine content. Both factors significantly influenced these dependent variables. Enzyme concentration more profoundly affected amino nitrogen content than fermentation time. β-Glucan content and cystine level were primarily affected by fermentation time. We elicited each variable's regression formula and identified optimal fermentation conditions for functional compounds. The predicted optimum conditions were an enzyme concentration of 0.28-0.32% and a fermentation time of 58.0-62.0 min. Under these optimal conditions, each black soybean variety's sulfur amino acid content ranged from 818.62 to 922.62 mg/100 g, demonstrating significant variety differences.