• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1589-1594
• /
• 2010

Glutaraldehyde was used to cross-link chitosan beads to immobilize the crude enzyme $\beta$-glucosidase from Exiguobacterium sp. DAU5. The conditions for preparing cross-linking chitosan beads and immobilization such as concentration of glutaradehyde, cross-linking time, immobilization pH and time were optimized. The chitosan beads were cross-linked with 1.5% glutaraldehyde for 1.5 hr. The immobilized $\beta$-glucosidase had an overall yield of 20% and specific activity of 5.22 U/g. The optimized pH and temperature were 9.0 and $55^{\circ}C$, respectively. More than 80% of its activity at pH 7.0-10.0, 80% at $40^{\circ}C$ for 2 hr and 48% at $50^{\circ}C$ for 1 hr, were retained. However, the immobilization product showed higher pH and thermal stabilities than free enzymes. It also showed high hydrolyzing activity on soybean isoflavone glycoside linkage. These results suggest the broad application prospects of immobilization enzymes.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.21-30
• /
• 2015

Ceramic foams are prepared as positive images corresponding to a plastic foam structure which exhibits high porosities (85-90%). This structure makes the ceramic foams attractive as a catalyst in a dry reforming process, because it could reduce a high pressure drop problem. This problem causes low mass and heat transfers in the process. Furthermore, the reactants would shortly contact to catalyst surface, thus low conversion could occur. Therefore, this research addressed the preparation of dry reforming catalysts using a sol-gel catalyst preparation via a polymeric sponge method. The specific objectives of this work are to investigate the effects of polymer foam structure (such as porosity, pore sizes, and cell characteristics) on a catalyst performance and to observe the influences of catalyst preparation parameters to yield a replica of the original structure of polymeric foam. To accomplish these objectives industrial waste foams, polyurethane (PU) and polyvinyl alcohol (PVA) foams, were used as a polymeric template. Results indicated that the porosity of the polyurethane and polyvinyl alcohol foams were about 99% and 97%. Their average cell sizes were approximate 200 and 50 micrometres, respectively. The cell characteristics of polymer foams exhibited the character of a high permeability material that can be able to dip with ceramic slurry, which was synthesized with various viscosities, during a catalyst preparation step. Next, morphology of ceramic foams was explored using scanning electron microscopy (SEM), and catalyst properties, such as; temperature profile of catalyst reduction, metal dispersion, and surface area, were also characterized by $H_2-TPR$ and $H_2-TPD$ techniques, and BET, respectively. From the results, it was found that metal-particle dispersion was relatively high about 5.89%, whereas the surface area of ceramic foam catalysts was $64.52m^2/g$. Finally, the catalytic behaviour toward hydrogen production through the dry reforming of methane using a fixed-bed reactor was evaluated under certain operating conditions. The approaches from this research provide a direction for further improvement of marketable environmental friendly catalyst production.

• Journal of Aquaculture
• /
• v.19 no.3
• /
• pp.166-172
• /
• 2006

Induced androgenesis, a form of artificial parthenogenesis is an important tool for the generation and use of genetically isogenic or clonal fish strain. An optimized protocol for the genetic inactivation of mud loach (Misgurnus mizolepis) oocytes (i.e. production of androgenetic haploid) was developed using UV-irradiation. Various dose levels of UV significantly affected the fertilizing capacity of the eggs, hatchability of embryos and incidence of haploidy. Based on the extensive examinations of treatment conditions on embryo viability and haploid incidence, the optimum dose level of UV irradiation was turned out to be $10,800ergs/mm^2$ with 56.9% of hatching success and 94.6% of haploidy. The overall yield of putative androgen under optimized treatment condition was more than 50% out of total eggs inseminated. The success of androgenetic reproduction of haploid genome was verified by flow cytometry and PCR amplification of transgene that is exclusive to either one of parental sexes. However, a small portion $(8\sim11%)$ of presumed androgenetic haploid larvae was proven to contain residual DNA fragment(s) from maternal parent.

• The Korean Journal of Mycology
• /
• v.43 no.4
• /
• pp.253-259
• /
• 2015

Anthracnose caused by Collectotrichum acutatum is the most devastating disease of pepper plants in Korea. In this study, we evaluated the effect of selected antagonistic bacteria on control of anthracnose and plant growth promotion of pepper plants under field conditions. Four different bacterial isolates used in the current study were isolated from the pepper rhizosphere (GJ01, GJ11) and tidal flat (LB01, LB14) in previous studies. Four bacterial isolates, together with a control strain (EXTN-1), showed antifungal activity against C. acutatum in a dual culture assay. To test for plant growth promotion effect, seedling vigor index and growth parameters of pepper were measured under field condition. As a result, all four bacterial isolates were effective for improving plant growth promotion. The strain GJ01 was the most effective in improving the seedling vigor on pepper, but the strain GJ11 in increasing the pepper fruit yield. The incidence of anthracnose was inhibited in the range of 63.2~72.5% by treatment of four bacterial isolates. The current study indicated that the four bacterial isolates could be used as potential biological control agents of anthracnose disease of pepper.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.316-325
• /
• 2003

The blends of waste-polyethylene (W-PE)/waste-ethylene vinyl acetate copolymer (W-EVA) with inorganic and phosphorous flame retardants (i.e., aluminium hydroxide, magnesium hydroxide, and so on) were prepared by melt mixing techniques at different compositions and foamed. The flame retardancy and foaming properties of the blends, limiting oxygen index (LOI), heat release rate (HRR), carbon monoxide yield (COY), total heat release (THR), effective heat of combustion (EHC), expandability and cell structure were investigated using cone calorimeter, SEM, LOI tester and polarizing microscope. When the composition ratios of the W-PE/W-EVA blends were 50/50 (w/w), and the ranges of the flame retardants contents were $175{\sim}220 phr$, we could obtain foams with the uniform and closed cell, high expandability (1900 % or more), high LOI, and low HRR values. These results depend on crosslinking and loaming conditions, a char formation and smoke suppressing effect. Aluminium hydroxide had more effect in the increase of LOI than magnesium hydroxide, while magnesium hydroxide considerably affected the decrease of HRR and COY.

• Clean Technology
• /
• v.11 no.4
• /
• pp.195-204
• /
• 2005

A new condensation process for manufacturing N-acyl taurates which generates less pollutant and produces more than 60 % yield in comparison with the conventional process has been developed in this work. Its optimum process conditions are at $210{\sim}230^{\circ}C$ of reaction temperature and 6 ~ 9 hour of reaction time when Parasol 123 of petroleum refired oil is employed as process solvent and mixed catalysts of sulfonic acid and phosphoric acid are utilized as process catalyst. And the qualities of N-acyl taurates produced by this new process are similar to or better than those of imported product judging from their acid value, amine value and color. Thus, it can be said that the newly developed process for manufacturing N-acyl taurates in this work is better than the conventional process. The physical properties of N-acyl taurates produced in this work such as surface tension, foaming power, foaming stability, hard water stability, and emulsifying power etc. were compared with those of commercially available anionic surfactants. And the experimental results show that N-acyl taurates shows good physical properties and that they can be alternative to conventional anionic surfactants.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.134-142
• /
• 1995

In order to elevate the efficiency of methane fermentation using the paper mill sludge, this experiment was conducted at two temperature conditions($35^{\circ}C$ and $60^{\circ}C$), and overlooked the addition effects of ethyl acetate as a substrate, nickel as a constituent of $F_430$, and sulfur as a cell growth factor and reductant. The cellulose of paper mill sludge was degraded to lower molecular materials by heating at $60^{\circ}C$ and NaOH treatment. Methane forming rates were 4.8% from NaOH-treated paper mill sludge added with ethyl acetate, 16.5% with sodium sulfide, 19.8% with nickel trioxide, 31.9% with mixture, and 9.6% with control at $60^{\circ}C$, but 0.21% with ethyl acetate, 2.14% with nickel acetate, 3.02% with nickel sulfate, 3.34% with nickel trioxide and 0.62% with control at $35^{\circ}C$. Therefore, methane yield was increased by approximately 10-fold at $60^{\circ}C$ than $35^{\circ}C$, and fermentation liquid added with mixture(nickel trioxide+ethyl acetate+sodium sulfide) at $60^{\circ}C$ showed the medium pH(7.0), higher COD value and lower nitrogen content.

• Management & Information Systems Review
• /
• v.33 no.1
• /
• pp.45-63
• /
• 2014

A trading system is a computer trading program that automatically submits trades to an exchange. Mechanical a trading system to execute trade is spreading in the stock market. However, a trading system to trade a single asset might occur instability of the profit because payoff of this system is determined a asset movement. Therefore, it is necessary to develop a trading system that is trade two assets such as a pair trading that is to sell overvalued assets and buy the undervalued ones. The aim of this study is to propose a relative value based trading system designed to yield stable and profitable profits regardless of market conditions. In fact, we propose a procedure for building a trading system that is based on the rough set analysis of indicators derived from a price ratio between two assets. KOSPI 200 index futures and S&P 500 index futures are used as a data for evaluation of the proposed trading system. We intend to examine the usefulness of this model through an empirical study.

• The Korean Journal of Mycology
• /
• v.28 no.2
• /
• pp.73-80
• /
• 2000

This study was carried out to investigate the optimal mycelial growth and an artificial cultivation conditions of Pleurotus eryngii. The optimal medium for the mycelial growth and density was MYPA medium. The optimal temperature and pH for the mycelial growth were $25^{\circ}C$ and 6.0, respectively. The modified optimal medium composition were obtained to be soluble starch 3%(w/v), malt extract 0.25%(w/v), yeast extract 0.25%(w/v) and $CaCl_2{\cdot}2H_2O$ 0.05% (w/v). From the results of experiment on the nutritional requirements, the modified optimal medium was higher than MYP medium in mycelial production and growth yield (Yx/s) of Pleurotus eryngii. The optimal sawdust species of solid culture for the mycelial growth and density was Quercus spp. The optimal concentration of additives (rice bran and wheat bran) and moisture content for the mycelial growth were about 30%(v/v) and 70%(v/v), respectively. On the other hand, the optimal concentration of additives for the production of fruiting body was 20%(v/v) of rice bran.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.305-311
• /
• 1993

Marine organisms were investigated to identify the marine actinomycetes that produced noble bioactive compounds. Microorganism counts range from $2.1{\times}10^3\;to\;1.2{\times}10\;CFU/g$ of marine organisms. Actinomycetes constituted 0.01 to $0.5\%$ of culturable microbial community. We identified the marine actinomycetes that produced novel bioactive compounds. During the course of screening for bioactives from the marine microorganisms, we found that the strain in sponge had antimicrobial activities. From the morphological, cultural and various physiological characteristics, this strain was identified for Actinomycetes No. 101. The optimal compositions of culture medium for Actinomycetes No. 101 were starch 30g/l as carbon source, casamino acid 10g/l as nitrogen source. The optimal pH of medium and fermentation temperature were $6.5{\sim}7.0$ and $30^{\circ}C$, respectively. Fermentation has been conducted in the marine broth at $30^{\circ}C$ for 72 hour. The yield of fermentation got about 3g as dry weight(per liter of broth). The distribution of antimicrobial activity of Actinomycetes No. 101 was screened by paper disc. The extract of cultured cell and broth inhibited the growth of Staphylococcus aureus and Bacillus subtilis, but the inhibition action was week against yeast and mold.