• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.3
• /
• pp.183-199
• /
• 1976

1. The cultivated land in Korea has originally low fertility resulting in high dependence to fertilizers. 2. The total fertilizer requirement calculated by the Office of Rural Development (ORD) in 1976 was about 1,153 thousand mts, and the total amount of supply planned by the Ministry of Agriculture and Fishery was 1,010 thoushand mts which is close to the amount calculated by ORD. However, there is some gap between the amount of recommended (N, 11.6; $P_2O_5$: $K_2O$, 7.3kg/10a> and supply planned (N, 12.0; $P_2O_5$, 6.3; $K_2O$. 4.8kg/10a) fertilizers for each elements per unit area 3. For 15 years from 1960 to 1975 the fertilizer consumption of nitrogen was roughly increased from 200,000 mts to 500,000 mts; phosphorus, from 50,000 to 250,000 mts; potassium, from 10, 000 to 170,000 mts; accounting 2.5, 5, and 17 times of increase respectively. 4. The total fertilizer consumption for 5 years from 1967 to 1971 was about 100,000 mts and another 5years from 1971 to 1975 was 300,000 mts indicating three times increase. 5. The direct factors influenced to the increase of fertilizer consumption in recent years are 1) the dissemination of high yielding Tongil type rice varieties which are resistant to heavy fertilization 2) high price policy for agricaltural products 3) increased cultivation of vegetables:, fruits, and forages which require high level of fertilizers. The indirect factors are 1) dissemination of new improved agricultural techniques, 2, improvement of cultivated land conditions through irrigation system and land reform, 3) increased supply of silicate fertilizers, and 4) increase of farm income. 6. The percentage of total fertilizer consumption by rice (32%) and barley (25%) is about 57%. The ratio of total fertilizer consumption by vegetables and forages is expected to increase greatly. 7. Based on the increasing tendency of cultivated land and yield per unit area for last 10 years in each crop, total fertilizer consumptions in 1980, 1990, and 2000 year are estimated to 1,290,000, 1,580,000 and 1,870,000 mts respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.1
• /
• pp.53-60
• /
• 1973

It is well known that upland soils in Korea are of low fertility, especially if newly reclaimed. Broadcasting of a sufficient rate of fused phosphate in addition to the normal dosage of fertilizer on such soils, may produce a crop yield comparable to that on ordinary upland soils, and the broadcasting of fertilities may build up soil fertility rather quickly. Building up fertility in this way will give a good crop growth on such newly reclaimed soils even under conditions where supplies of compost are limited. Since the precipitation in Korea is mainly concentrated in the months June through September, a complete cover of the land during this period is of major importance, requiring a well considered rotation and skilful management. If this is not possible, the application of a much of about 200 kg, straw per 1/10th ha. is recommended instead. Furthermore, contour cultivation on land with slopes less than five degrees, together with contour furrows, straw mulching, strip cultivation, interplanting, and proper selection of crops which provide a good cover of the land, is recommended on slopes varying between five and fifteen degrees and in addition, bench-terraces on slopes in excess of $15^{\circ}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.1
• /
• pp.104-111
• /
• 2011

In order to assess the performance of co-digester using pig slurry and food waste at the farm scale biogas production facility, the anaerobic facility that adopts the one-stage CSTR of 5 $m^3\;day^{-1}$ input scale was designed and installed under the conditions of the OLR of 2.33 kg $m^3\;day^{-1}$ and HRT of 30 days in an pig farmhouse. Several operation parameters were monitored for assessment of the process performance. The anaerobic facility was operated in three stages to compare the performance of the anaerobic co-digester. In the Stage I, that was fed with a mix of pig slurry to food waste ratio of 7:3 in the input volume, where input TS content was 4.7 (${\pm}0.8$) %, and OLR was 0.837-1.668 kg-VS $m^3\;day^{-1}$. An average biogas yield observed was 252 $Nm^3\;day^{-1}$ with methane content 67.9%. This facility was capable of producing an electricity of 626 kWh $day^{-1}$ and a heat recovery of 689 Mcal day-1. In Stage II, that was fed with a mixture of pig slurry and food waste at the ratio of 6:4 in the input volume, where input TS content was 6.9 (${\pm}1.9$) %, and OLR was 1.220-3.524 kg-VS $m^3\;day^{-1}$. The TS content of digestate was increased to 3.0 (${\pm}0.3$) %. In Stage III, that was fed with only pig slurry, input TS content was 3.6 (${\pm}2.0$) %, and OLR was 0.182-2.187 kg-VS $m^3\;day^{-1}$. In stage III, TS and volatile solid contents in the input pig slurry were highly variable, and input VFAs and alkalinity values that affect the performance of anaerobic digester were also more variable and sensitive to the variation of input organic loading during the digester operation. The biogas produced in the stage III, ranged from 11.3 to 170.0 $m^3\;day^{-1}$, which was lower than 222.5-330.2 $m^3\;day^{-1}$ produced in the stage II.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.319-325
• /
• 2016

This study was designed to develop a manufacturing process for ginseng concentrate with reduced unpleasant aroma and bitter taste. Two types of ginseng, white and red, were extracted under six different conditions (the 1st to the 6th step) of temperature ($65{\sim}95^{\circ}C$) and ethanol concentration (0~70%). Six extracts of each ginseng were evaluated by a sensory test, and assayed for crude saponin, ginsenosides, and acidic polysaccharides. The content of crude saponin in the extracts decreased with extraction time. There was no significant difference in the crude saponin content between white and red ginseng extracts. The yield of red ginseng extract was higher (45%) than that of white ginseng. No significant difference was observed in the acidic polysaccharide content between red and white ginseng extracts. $Rg_3$, a specific ginsenoside in red ginseng, was detected in the 1st to 6th extracts of red ginseng. Bitterness, astringency, and sourness of ginseng extracts decreased as the extraction steps proceeded. The composite of the 1st, 2nd, and 6th step extracts decreased bitterness and astringency, and the highest overall acceptance. Compared with commercial beverages, the composition of the three extracts is the desirable method to decrease the bitter and astringent tastes, and the overall unpleasant flavor of ginseng.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.3
• /
• pp.201-208
• /
• 2000

This study was conducted to improve the productivety of Ligusticum chuanxiong HORT. and Cnidium officinale MAKINO by establishing the effects of cultivating conditions. The highest weight of rhizome and root per plant was 36.5g at $50{\times}25cm$ planting density. Fresh weight of underground parts per plant increased as weight of rhizome increased and it was the highest (67g) at $50{\times}25cm$ while the lowest one(59g) was at $50{\times}15cm$. Fresh weight of underground parts per plant of C. officinale increased as weight of rhizome increased. It was significantly different (53-67g) among the treatments of planting density.

• Sleep Medicine and Psychophysiology
• /
• v.19 no.1
• /
• pp.11-17
• /
• 2012

Objective: Among various methods developed to quantitatively explore electroencephalograms (EEG), we focused on a wavelet method that was known to yield robust results under nonstationary conditions. The aim of this study was thus to introduce the wavelet method and demonstrate its potential use in clinical sleep studies. Method: This study involved artificial EEG specifically designed to validate the wavelet method. The method was performed to obtain time-dependent spectral power and phase angles of the signal. Synchrony of multichannel EEG was analyzed by an order parameter of the instantaneous phase. The standard methods, such as Fourier transformation and coherence, were also performed and compared with the wavelet method. The method was further validated with clinical EEG and ERP samples available as pilot studies at academic sleep centers. Result: The time-frequency plot and phase synchrony level obtained by the wavelet method clearly showed dynamic changes in the EEG waveforms artificially fabricated. When applied to clinical samples, the method successfully detected changes in spectral power across the sleep onset period and identified differences between the target and background ERP. Conclusion: Our results suggest that the wavelet method could be an alternative and/or complementary tool to the conventional Fourier method in quantifying and identifying EEG and ERP biomarkers robustly, especially when the signals were nonstationary in a short time scale (1-100 seconds).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.975-980
• /
• 2011

1-Palmitoyl-2-oleoyl-3-oleoyl glycerol (POO) and 1-palmitoyl-2-oleoyl-3-palmitoyl glycerol (POP) were enriched from palm stearin using an acetone fractionation process. Response surface methodology was employed to optimize the purity of POO ($Y_1$, %) and POP ($Y_2$, %) along with POO+POP content ($Y_3$, g) based on independent variables such as fractionation temperature ($X_1$, 25, 30, and $35^{\circ}C$) and the ratio of palm stearin to acetone ($X_2$, 1:3, 1:6 and 1:9, w/v). Fractionation conditions were optimized to maximize $Y_1$, $Y_2$, and $Y_3$, in which fractionation temperature was $29.3^{\circ}C$ with a 1:5.7 acetone ratio. With such parameters, 60.9% of POP and 23.8% of POO purity were expected with a 75% yield (3.0 g) of POO and POP.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.56-60
• /
• 2017

Fruiting bodies of Ganoderma lucidum cultivated in Korea were reflux extracted at $90^{\circ}C$ using water and ethanol under different pH conditions. ${\beta}-Glucan$ contents, extraction yield, and antioxidant capacities of extracts were investigated. Antioxidant activities of water and ethanol extracts were measured by DPPH radical scavenging test and the FRAP method, along with their total phenolic contents and total flavonoid contents. Extraction time for the experiment was determined to be 6 h, and ${\beta}-glucan$ contents were the highest. Overall, ${\beta}-glucan$ contents of extracts increased with higher pH values, except those of 90% ethanol extracts (P<0.05). The yields and ${\beta}-glucan$ contents of ethanol extracts were lower than those of water extracts, and highest in water extract at pH 10 ($8.53{\pm}0.17%$, $6.20{\pm}0.12g/100g$, respectively). Ethanol extracts of fruiting bodies of G. lucidum showed stronger antioxidant capacities than water extracts (P<0.05). Especially, total phenolic contents of 30% ethanol extract at pH 10 was highest (35.06 GAE mg/g). Total phenolic contents of water and ethanol extracts showed good correlations with DPPH radical scavenging activities (r=0.969).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.4
• /
• pp.747-752
• /
• 2004

Alginates were extracted from the Laminaria religiosa, Undaria pinnatifida, and Hizikia fusiforme by using four different extraction methods and compared the yields of alginate. Acid-alkali soluble alginate (AASA) extraction method from Undaria pinnatifida resulted in the best yield of alginate among the seaweeds. The optimal condition for extracting alginate from Laminaria religiosa was 0.4 N H$_2$SO$_4$ and 3% NaCO$_3$ concentrations at the AASA extraction method. The alginate yields of hot water extractable material (HWEM) water soluble alginate (WSA), alkali soluble alginate (ASA) and AASA in Hizikia fusiforme were 18.6, 4.7, 22.5 and 26.5%, respectively. The alginates manufactured by the WSA extraction method showed more bright color than those of the ASA and AASA extraction methods. The alginate prepared by the ASA extraction method from Hizikia fusiforme showed the higher viscosity than that of the ASA extraction method. The molecular weight of the alginate from Hizikia fusiforme was 33.3 kDa to 121.6 kDa depending on the extraction method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.