• Journal of the Korean Mathematical Society
• /
• v.46 no.5
• /
• pp.1105-1117
• /
• 2009

In this paper a parameter identification problem for a damped sine-Gordon equation is studied from the theoretical and numerical perspectives. A spectral method is developed for the solution of the state and the adjoint equations. The Powell's minimization method is used for the numerical parameter identification. The necessary conditions for the optimization problem are shown to yield the bang-bang control law. Numerical results are discussed and the applicability of the necessary conditions is examined.

• Journal of the Korean Mathematical Society
• /
• v.37 no.4
• /
• pp.625-643
• /
• 2000

In this paper we formulate an optimal control problem governed by time-delay Volterra integral equations; the problem includes control constraints as well as terminal equality and inequality constraints on the terminal state variables. First, using a special type of state and control variations, we represent a relatively simple and self-contained method for deriving new necessary conditions in the form of Pontryagin minimum principle. We show that these results immediately yield classical Pontryagin necessary conditions for control processes governed by ordinary differential equations (with or without delay). Next, imposing suitable convexity conditions on the functions involved, we derive Mangasarian-type and Arrow-type sufficient optimality conditions.

• Microbiology and Biotechnology Letters
• /
• v.22 no.5
• /
• pp.531-537
• /
• 1994

This study was undertaken with objective of optimizing the conditions of fermentation in an aqueous two-phase system which is composed of polyethylene glycol (PEG) 20000 and crude dextran (Dx). The data were obtained and analyzed using the Box-Wilson's experimental design protocol and the response surface methodology. To reach this end a multilinear polynomial regres- sion model was developed, which can be utilized for the purpose of optimizing the extractive fermentation. Optimum conditions for batch fermentation with aqueous two phase system were found to be at 4.2~5.4% PEG/3.2~4.2% Dx range. The composition of the center was 4.8% PEG/ 3.6% Dx. Optimum operating conditions for initial sugar concentration and fermentation time were approximately 160 g/l, and 21~22 hr, respectively. Fermentation in the aqueous two phase system composed of 5% PEG/4% Dx showed increase of 23% in ethanol concentration, of 9.5% in ethanol yield, and of 19% in ethanol productivity as compared to the case of fermentation of neat Jerusalem artichoke juice.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.462-474
• /
• 2001

In this paper, Generalized Differential Quadrature Method is applied to the buckling analysis of built-up columns without or with stay plates. numerical analysis using GDQM is carried out for various boundary conditions(simply supported conditions, fixed conditions, fixed-simply supported conditions), dimensionless stiffness parameter and dimensionless inertia moment parameter. The accuracy and convergence of solutions are compared with exact solutions of Gjelsvik to validate the results of GDQM. Results obtained by this method are as follows. 91) This method can yield the accurate numerical solutions using few grid points. (2) The buckling load of built-up column increases as the dimensionless stiffness parameter decreases. (3) The effects of boundary conditions on the buckling load are not considerable as the dimensionless stiffness parameter increases. (4) The buckling load of built-up column increases due to the stay plate.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.564-569
• /
• 2001

This study was carried out in order to investigate the characteristics of xylitol fermentation by a xylitol dehydrogenase defective mutant PXM-4 of P stipitis CBS 5776 and to determime optimum conditions for the high yield ofxylitol production from xylose. Gluconic acid was selected as a co substrate for the xylitol fermentation, since gluconic acid neither blocked xylose transport nor repressed xylose reductase expression. An increase of gluconic acid concentration reduced the rates of xylitol production and cell growth by decreasing medium pH, and the optimal concentration of gluconic acid was determined to be 20 gll with approximately 100% xylitol conversion yield. A fed-batch cell culture resulted in a 44.8 g/l xylitol concentration with 100% yield, based on the amount of xylose consumed.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.903-908
• /
• 2005

Inoculation of the carrier-based mixed bioinoculants af N-fixer (Azospirillum lipoferum strain Az204/Rhizobium strain BMBS P47) and phosphate-solubilizing bacterium (Bacillus megaterium var phosphaticum strain Pb 1) promoted growth and yield of pearl millet and blackgram under pot-culture conditions. The mixed inoculant of Az204 and Pb 1 enhanced germination, seedling vigor, plant height, and seed weight, and resulted in $6\%$ increase in grain yield of pearl millet. Likewise, the mixed inoculant of BMBS P47 and Pb1 increased growth, nodulation, and yield in blackgram. The rhizosphere soil enzyme activities, including nitrogenase, urease, and phosphatase, in both pearl millet and blackgram were significantly increased by the inoculation of the mixed inoculant, compared to that of the individual inoculants. The results clearly indicate the beneficial effect of co-culturing the N-fixer and P-solubilizer in inoculants production.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1517-1539
• /
• 2015

Eccentrically braced frames (EBFs) often use conventional steel with medium yield strength. This system requires structural members with large cross-sections for well seismic behavior, which leads to increased material costs. In eccentrically braced frames with high strength steel combination (HSS-EBFs), links use Q345 steel (specified nominal yield strength 345 MPa), braces use Q345 steel or high strength steel while other structural members use high strength steel (e.g., steel Q460 with the nominal yield strength of 460 MPa or steel Q690 with the nominal yield strength of 690 MPa). For this approach can result in reduced steel consumption and increased economic efficiency. Several finite element models of both HSS-EBFs and EBFs are established in this paper. Nonlinear hysteretic analyses and nonlinear time history analyses are conducted to compare seismic performance and economy of HSS-EBFs versus EBFs. Results indicate that the seismic performance of HSS-EBFs is slightly poorer than that of EBFs under the same design conditions, and HSS-EBFs satisfy seismic design codes and reduce material costs.

• Korean Journal of Plant Resources
• /
• v.5 no.1
• /
• pp.57-68
• /
• 1992

The effects of various kind and amount of nitrogen fertilizers on the plant grorth. physiological , yield and extracts. ligustilide, butylidene phthalide contents of curdsdrug "Tou-ki" (AnTelica acutiloba Kitagawa) were investigated in 1989. Five plots variouskind of nitrogen fertilizers. Namely, no nitrogen, urea. ammonium nitrate, ammoniumchloride and control plot of ammonium sulfate. The other, by providing five plotsdifferent composed ratio of nitrogenous fertilizers. containing no nitrogen (No. o) .0.5-fold nitrogen (No s), control plot of 1.0-fold nitrogen(Nl.o). 1.5-fold nitrogen(Nl s)and 2.0-fold nitrogen Na. o), but nitogen was used the ammonium sulfate. The results showedthat the crude drug "Tou-ki" can ammonium chloride be produced in good yield, displayingboth good plant growth and remarkable physiologically-active conditions, and it can beproduced such that the extracts is maximized. Additionally, using methods of gaschromatography (GC) , it was established that ligustilide and butylidene phthalide, majorcomponents in the crude drug was recovered in a good yield from the fully grown plants.The other, the plant growth, the physiologically-active, the weight of whole plant, theyield of extracts and ligustilide, butylidene phthalide were seen to be best at the plotof 2.0-fold nitrogen and according to the increase or decrease of nitrogen decreasedgradually. Therefore. about 2 fold of standard quantity seems to be the most suitablequantity of nitrogen for "Tou-ki" cultivation .uot;Tou-ki" cultivation .ion .

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.5
• /
• pp.354-361
• /
• 2018

Background: This study was conducted to investigate the growth characteristics, root yield and curcuminoid content of turmeric (Curcuma longa L.), cultivated using mother seed rhizomes (MR) and finger seed rhizome (FR) of different sizes. MR are attached to the stem, and FR are connected to the MR, and are used as a general seed rhizome. Methods and Results: Seed rhizomes of different types and sizes were used: large, medium and small for FR, and large, half-sized, and small for MR. These were assigned to the experimental groups and cultivated under greenhouse conditions. The growth characteristics, root yield, and curcuminoid content did not show clear difference between MR and FR, but suggest that the larger seed rhizomes (above 30 g) could have higher root yields. On average, harvested mother rhizomes (HMR) contained more curcuminoid than harvested finger rhizomes (HFR), while the yield of HFR was higher than that of HMR. The higher weight of harvested roots correlated significantly with elevated curcuminoid content. Conclusions: The two seed rhizomes, MR and FR, did not differ in root yield and curcuminoid contents, but larger seed rhizomes may produce better root yields. This suggest that the optimum seed rhizome is larger FR, to produce higher yields and quality in turmeric root production.

• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.199-205
• /
• 2013

The mechanical properties and microstructures of aluminum-matrix composites fabricated by the dispersion of fine alumina particles less than $20{\mu}m$ in size into 6061 aluminum alloys are investigated in this study. In the as-quenched state, the yield stress of the composite is 40~85 MPa higher than that of the 6061 alloy. This difference is attributed to the high density of dislocations within the matrix introduced due to the difference in the thermal expansion coefficients between the matrix and the reinforcement. The difference in the yield stress between the composite and the 6061 alloy decreases with the aging time and the age-hardening curves of both materials show a similar trend. At room temperature, the strain-hardening rate of the composite is higher than that of the 6061 alloy, most likely because the distribution of reinforcements enhances the dislocation density during deformation. Both the yield stress and the strain-hardening rate of the T6-treated composite decrease as the testing temperature increases, and the rate of decrease is faster in the composite than in the 6061 alloy. Under creep conditions, the stress exponents of the T6-treated composite vary from 8.3 at 473 K to 4.8 at 623 K. These exponents are larger than those of the 6061 matrix alloy.