• Journal of Electrochemical Science and Technology
• /
• v.8 no.1
• /
• pp.77-86
• /
• 2017

The valorization of domestic wastes becomes a very important research axis that can reduce the energy consumption and protect our environment. The objective of this study is to remove zinc ions from wastewater by using banana peels after their activation as sensor in the working electrode for an environmental application. Banana peels were dried, crushed and treated with sulfuric acid then mixed with polyaniline to improve their electrical conductivity. Cyclic voltammetry and chronoamperometry were used for electrochemistry tests. The obtained voltammogramms at well optimized conditions of applied potential of -1.3 V/SCE and initial zinc concentration of 0.2M during 2 hours of electrolysis, showed the reduction peak of the zinc at a potential of -1.14 V/SCE, which confirmed the activity of this electrode. The modeling of experimental data revealed that the adsorption was fitted by the Langmuir isotherm with a maximal adsorption capacity of 3.4188 mg/g. Changes in the structure of the powder after the electrosorption was noticed by SEM and EDX. Finally, the dosage of the electrolytic solution showed a diminution of the zinc concentration with yield of 99.99%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.155-156
• /
• 2015

Mushrooms as a health food with high protein, low calorie, and rich in a variety of vitamins and minerals, get more and more attention. While the artificial cultivation of mushrooms, besides temperature there is another important factor, that is humidity. There are a lot of research on the temperature,buttherelativeresearchof correlation between the mushroom and the humidity is less. In this paper, the growth status of mushrooms under different humidity conditions was investigated. Data reference is provided to improve the yield and quality of mushrooms.

• KSBB Journal
• /
• v.9 no.3
• /
• pp.272-278
• /
• 1994

Attenuated varicella-zoster virus(VZV) was cultured in human embryonic lung cells. The effects of serum type and its concentration on the production of VZV were studied. Regardless of cell culture conditions, VZV yield was increased with multiplicity of infection, and the total cell concentration was decreased after virus infection. The newborn calf serum, calf serum, or horse serum was not as good as the fetal bovine serum or calf serum supplemented with iron for the propagation of VZV in the human embryonic lung cells. The yields of total VZV(cell-associated virus and cell-free virus) in the medium with calf serum containing iron were comparable to those in the medium supplemented with fetal bovine serum. Furthermore, some components of serum appear to be important for the maintenance of VZV infectivity.

• Structural Engineering and Mechanics
• /
• v.40 no.1
• /
• pp.29-48
• /
• 2011

Under large storm loads sections of a long pipeline on the seabed can be uplifted. Numerically this loss of contact is extremely difficult to simulate, but accounting for uplift and any subsequent recontact behaviour is a critical component in pipeline on-bottom stability analysis. A simple method numerically accounting for this uplift and reattachment, while utilising efficient force-resultant models, is provided in this paper. While force-resultant models use a plasticity framework to directly relate the resultant forces on a segment of pipe to the corresponding displacement, their historical development has concentrated on precisely modelling increasing capacity with penetration. In this paper, the emphasis is placed on the description of loss of penetration during uplifting, modelled by 'strain-softening' of the force-resultant yield surface. The proposed method employs uplift and reattachment criteria to determine the pipe uplift and recontact. The pipe node is allowed to become free, and therefore, the resistance to the applied hydrodynamic loads to be redistributed along the pipeline. Without these criteria, a localised failure will be produced and the numerical program will terminate due to singular stiffness matrix. The proposed approach is verified with geotechnical centrifuge results. To further demonstrate the practicability of the proposed method, a computational example of a 1245 m long pipeline subjected to a large storm in conditions typical of offshore North-West Australia is discussed.

• Interaction and multiscale mechanics
• /
• v.6 no.2
• /
• pp.237-255
• /
• 2013

In this paper, a meshfree-enriched finite element method (ME-FEM) is introduced for the large deformation analysis of nonlinear path-dependent problems involving contact. In linear ME-FEM, the element formulation is established by introducing a meshfree convex approximation into the linear triangular element in 2D and linear tetrahedron element in 3D along with an enriched meshfree node. In nonlinear formulation, the area-weighted smoothing scheme for deformation gradient is then developed in conjunction with the meshfree-enriched element interpolation functions to yield a discrete divergence-free property at the integration points, which is essential to enhance the stress calculation in the stage of plastic deformation. A modified variational formulation using the smoothed deformation gradient is developed for path-dependent material analysis. In the industrial metal forming problems, the mortar contact algorithm is implemented in the explicit formulation. Since the meshfree-enriched element shape functions are constructed using the meshfree convex approximation, they pose the desired Kronecker-delta property at the element edge thus requires no special treatments in the enforcement of essential boundary condition as well as the contact conditions. As a result, this approach can be easily incorporated into a conventional displacement-based finite element code. Two elasto-plastic problems are studied and the numerical results indicated that ME-FEM is capable of delivering a volumetric locking-free and pressure oscillation-free solutions for the large deformation problems in metal forming analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.7
• /
• pp.693-699
• /
• 2009

This paper shows mechanical properties and behaviors of macro- and micro-structures on friction stir welded specimen with 6061-T6 aluminum alloy plate. It apparently results in defect-free weld zone jointed at welding conditions like the traverse speed of 267mm/min, tool rotation speed of 2500rpm, pin inserted depth of 4.5mm and tilting angle of $2^{\circ}$ with tool dimensions such as tool pin diameter of 5mm, shoulder diameter of 15mm and pin length of 4.5mm. The tensile stress ${\sigma}_T=228MPa$ and the yield point ${\sigma}Y=141MPa$ are obtained at the condition of traverse speed of 267mm/min and tool rotation speed of 2500rpm. With the constant rotation speed, the higher traverse speed become, the higher tensile stress and yielding point become. Vickers hardness for welding zone profile were also presented.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.6
• /
• pp.39-46
• /
• 2013

This work introduces a simple one-reactor adsorption desalination system that harnesses low temperature heat sources (solar energy, waste heat), which has been experimentally studied to elicit the most suitable design parameters and operating conditions. The design process of the system was divided into three parts to reflect the operating principle of desalination technology with application of adsorption processes. First, the evaporator for the vaporization of saline water was designed, then the reactor for the adsorption and release of the steam, followed by the condenser for condensation of the fresh water. The specific water yield is measured experimentally with respect to the time while controlling parameters such as heat source temperatures, coolant temperatures, system switching and half-cycle operational times. The present system well demonstrates the applicability of silica gel in relation to adsorption technologies that utilize low temperature heat sources ranging from 60 to $80^{\circ}C$, such as solar energy and waste heat.

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.206-211
• /
• 1997

The optimal conditions for the production and regeneration of the protoplasts from Lentinula edodes were studied. Protoplast formation from the mycelia of L. edodes which were cultured in liquid medium showed a significantly high yield compared with that of the mycelia which were cultured on cellophane covered agar media. A mixture of Novozyme 234 (15 mg/ml) and Cellulase Onozuka R10 (10 mg/ml) in 0.6 M mannitol (pH 4) was optimal lytic enzyme for the protoplast release. The optimal incubation time and mycelia age were 3.5-4 hours at $30^{\circ}C$ and 6-8 days, respectively. Regeneration frequency was 0.18% plated onto a medium containing 0.6 M sucrose, and 0.08% plated onto a medium containing mannitol. But hardly any regeneration was observed in the media containing NaCl, KCl, or $MgSO_{4}$ More than 90% of the protoplasts contained nuclei and the nucleus number per protoplast was 1.1. The DNA content per nucleus was 5.1 pg. The diameter of the protoplast was $3-5{\mu}m$ and it had a well defined cell structure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.10
• /
• pp.857-863
• /
• 2005

A yeast strain utilizing styrene epoxide as a sole carbon and energy source was isolated from soil samples for the production of enantiopure of styrene epoxide by kinetic resolution. The strain, identified as a Rhodosporidium toruloides SJ-4, expressed an epoxide hydrolase which preferentially converted (R)-styrene epoxide into the corresponding diol. A maximum activity of 135 U/L was observed when biomass (dry cell mass) reached 6.7 g/L at 21 h of batch culture. Under the partially optimized reaction conditions ($35^{\circ}C$ and pH 8.0), the optically pure (S)-styrene epoxide was obtained with the yield of 21% when the initial substrate concentration was 100 mM. The reaction was completed at 9 h.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.23 no.2
• /
• pp.207-213
• /
• 2011

The diapause of $Telegryllus$ $emma$, the Emma field cricket, was investigated to study the ecological characteristics of the species. Changes in the volume, oxygen consumption, and water content of T. emma eggs were followed from oviposition. An increase in volume, oxygen consumption and water uptake occurred from 7 to 8 days following oviposition. The oxygen consumption of the eggs increased slowly for 7 days following oviposition, but then decreased until 15 days following oviposition. These results showed that a physiological change at diapause initiation affected the volume, water content, and oxygen consumption of the $T.$ $emma$ eggs. An experimental investigation of egg hatching showed that the eggs could be stocked at $10^{\circ}C$ for 40 days with a 14 day pre-period after laying and yield, 62.1% hatchability under these conditions. Maintaining the temperature at approximately $10^{\circ}C$ was favorable for hatching. Another experiment on egg hatching showed that the storage of eggs at $10^{\circ}C$ from 40 to 180 days would ensure satisfactory, hatching capacity.