• Korean Journal of Medicinal Crop Science
• /
• v.3 no.3
• /
• pp.240-245
• /
• 1995

This study was conducted to find out environment conditions in order to increase of growth and yield of tuberlets in pinellia ternata (Thunb.) Breit. The optimal temperature conditions for the growth of tuberlets were good rather temperature fluctuations than constant one and the optimal photoperiod was a 6hr-photoperiod. The growth of tuberlets to the kinds and concentration of growth regulators was good for 0. lppm 2.4- D, 10ppm kinetin and 50ppm gibberellin treatment. In colchicine soaking treatment, the growth of tuberlets was bad, but bulblets formation was good for 0. 05% colchicine treatment for 48hr. -soaking. In colchicine dropping treatment, dry tuber yield was good for 0. 1% colchicine treatment with once dropping for one day.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.399-409
• /
• 2012

Effects of pretreatment and extraction conditions on total polyphenol yield from licorice root were investigated using statistical method. For pretreatment, heat treatment at $121^{\circ}C$ for 10 min was applied. Licorice root content in solvent (10, 20, and 30%) ethanol concentration (20, 40, and 60%) and reaction time (1, 2, and 3 h) were used as variables for extraction conditions. Two experiments, with heat treated and no treated licorice, were prepared with same experimental design. Box behnken design was employed and produced a total of 15 trials. Total polyphenol yield from licorice root was not affected by heat treatment. Among variables, licorice content in solvent showed most significant effect regardless of other variables (p<0.05). Finally, optimum conditions for the extraction of total polyphenol from licorice root was detected as following: 10% of licorice in solvent, 52% ethanol as solvent, 2 h of reaction time and non-heat treatment and the extraction yield from optimized condition was 17.6 mg/g licorice root.

• The Korean Journal of Nuclear Medicine
• /
• v.24 no.1
• /
• pp.101-107
• /
• 1990

To develop $^{131}I-labelled$ m-iodobeneylguanidine $(^{131}I-MIBG)$, various experiments such as synthesis of MIBG, establishment of labelling conditions, determination of radiochemical purity, and examination of stability were carried out. 1) m-Iodobenzylguanidine (MIBG) sulfate was synthesized with a total yield of 62.4% by the condensation of m-iodobenzylamine hydrochloride with cyanamide via MIBG bicarbonate. Its physical properties, IR, $^1H-NMR$, and elemental analysis data were nearly identical to those of literature. 2) Freeze-dried or vacuum-dried kit vials were prepared from the mixture so as to contain MIBG (2 mg), ascorbic acid (10 mg), copper (II) sulfate (0.14 mg), and tin (II) sulfate (0.5 mg) per vial. Copper ( I ) catalyzed radioiodination of MIBG was carried out using kit vials and 0.01 M $H_2SO_4$ as solvent at $100^{\circ}C$ for 30 min under nitrogen atmosphere (optimal conditions). Labelling yield was 98% and radiochemical purity was 99.5%, respectively. 3) Solid-phase radioiodination of MIBG was carried out at $155^{\circ}C$ for 30 min using the prepared vials to contain MIBG (2 mg) and ammonium sulfate (10 mg). Duplicate reactions under the same conditions showed labelling yield of 95% and radiochemical purity of 99.5%. 4) $^{131}I-MIBG$ prepared either by catalytic or by solid-phase exchange method showed radio-chemical purity of 99% even after 3 days storing at room temperature.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.61-69
• /
• 2020

This paper is a study of the behavior characteristics that occur in the hydrogen storage vessel TYPE 1 according to pressure and temperature conditions by FEM(Finite element method). Von Mises stress (VMS) generated at the highest pressure was compared with Yield strength (YS) of the material for structural safety assessment of the container, and the results of plastic strain energy density (PSED) were analyzed as basic data for life expectancy. According to the analysis results, the safety of the hydrogen gas storage vessel is not ensured due to the occurrence of VMS higher than the yield strength on the bottom of the storage container at a gas pressure of 40 Mpa or higher. In addition, the results of VMS caused by temperature conditions are very low and the behavior by temperature can be ignored. The maximum pressure of VMS/YS below 1 is calculated to be about 30 Mpa, indicating that the hydrogen storage container subject to this paper should be managed with a gas charging pressure of less than 30 Mpa.

• Journal of Korean Dental Science
• /
• v.15 no.1
• /
• pp.9-18
• /
• 2022

Purpose: The purpose of this study was to evaluate whether three-dimensional (3D)-printed flexible denture resin has suitable mechanical properties for use as a thermoplastic denture base resin material. Materials and Methods: A total of 96 specimens were prepared using the 3D printed flexible denture resin (Flexible Denture). Specimens were designed in CAD software (Tinkercad) and printed through a digital light-processing 3D printer (Asiga MAX UV). Post-polymerization process was conducted according to air exposure or glycerin immersion at 35℃ or 60℃ and for 30 or 60 minutes. The maximum flexural strength, elastic modulus, 0.2% offset yield strength, and Vickers hardness of 3D-printed flexible denture resin were assessed. Result: The maximum flexural strength ranged from 64.46±2.03 to 84.25±4.32 MPa, the 0.2% offset yield strength ranged from 35.28±1.05 to 46.13±2.33 MPa, the elastic modulus ranged from 1,764.70±64.66 to 2,179.16±140.01 MPa, and the Vickers hardness ranged from 7.01±0.40 to 11.45±0.69 kg/mm². Conclusion: Within the limits of the present study, the maximum flexural strength, 0.2% offset yield strength, elastic modulus, and Vickers hardness are sufficient for clinical use under the post-polymerization conditions of 60℃ at 60 minutes with or without glycerin precipitation.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.175-182
• /
• 2002

A new high yielding mulberry genotype, Victory-1 (V-1) was recommended to the field for irrigated areas by Central Sericultural Research and Training Institute (CSRTI), Mysore during 1996-1997. As K-2 and S-36 mulberry genotypes are already in the field, a study on the comparative performance of V-1, 5-36 and K-2 varieties, in terms of leaf yield, yield attributes, leaf moisture and moisture retaining capacity and their impact on silkworm rearing was carried out under Telangana conditions of Andhra Pradesh during 1999-2001. Among the three genotypes the leaf yield was found to be significantly (P < 0.01) higher in V-1 (64,130 kg/ha/yr) followed by S-36 (44,064 kg/ha/yr) and K-2 (23,990 kg/ha/yr). The maximum leaf moisture was also observed in V-1 (71.84%) compared to S-36 (66.86%) and K-2 (64%). The moisture retaining ability was more in V-1 (70.17%) followed by S-36 (66.20%) and K-2 (60.08%). The yield attributes were found to be significantly (P < 0.01) enhanced in V-1 over S-36 and K-2. Silkworm rearing results (bioassay) indicated a significant (P < 0.01) reduction in larval duration and improvement in larval weight, effective rate of rearing by number and weight, single cocoon and shell weights and shell ratio in the silkworm lots fed on V-1 variety followed by S-36 and K-2. Hence, in this study, V-1 was found to be superior among the three varieties studied.

• Korean Journal of Remote Sensing
• /
• v.32 no.4
• /
• pp.383-401
• /
• 2016

In this paper, we described the statistical modeling of crop yields using satellite images, climatic datasets, soil property maps, and fertilizer data for the Midwestern United States during 2001-2012. Satellite images were obtained from the Moderate Resolution Imaging Spectroradiometer (MODIS), and climatic datasets were provided by the Parameter-elevation Regressions on Independent Slopes Model (PRISM) Climate Group. Soil property maps were derived from the Harmonized World Soil Database (HWSD). Our multivariate regression models produced quite good prediction accuracies, with differences of approximately 8-15% from the governmental statistics of corn and soybean yields. The unfavorable conditions of climate and vegetation in 2012 could have resulted in a decrease in yields according to the regression models, but the actual yields were greater than predicted. It can be interpreted that factors other than climate, vegetation, soil, and fertilizer may be involved in the negative biases. Also, we found that soybean yield was more affected by minimum temperature conditions while corn yield was more associated with photosynthetic activities. These two crops can have different potential impacts regarding climate change, and it is important to quantify the degree of the crop sensitivities to climatic variations to help adaptation by humans. Considering the yield decreases during the drought event, we can assume that climatic effect may be stronger than human adaptive capacity. Thus, further studies are demanded particularly by enhancing the data regarding human activities such as tillage, fertilization, irrigation, and comprehensive agricultural technologies.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.69-74
• /
• 2000

The medium for erythritol production by Torula sp. in a 500-ml baffled flask was optimized to be 300 g/I sucrose, 10 g/I yeast extract, 3 g/I $KH_2PO_4$, and 10 mg/I $CuSO_4{\cdot}5H_2O{\;}at{\;}34^{\circ}C$ with initial pH of 5.5. Using this optimal medium, erythritol of 166 g/I was obtained after 140 h of cultivation, corresponding to 55.3% of the erythritol yield from sucrose with a productivity of 1.11 g/I/h. Optimal concentrations of carbbon and nitrogen sources in a fermentor were higher than that in a flask due to the higher oxygen supply of the fermentor. Employing the medium containing 300 g/I or 400 g/I sucrose for the determination of optimal C/N ratio, the C/N ratio was found to be more important than the nitrogen concentration for effective erythritol production, The optimal ratio of yeast extract to sucrose (g/g) was 20. The yield and productivity of erythritol were maximal in the medium containing 400 g/I sucrose and 20 g/I yeast extract. when dissolved oxygen in the culture was increased, the cell mass increased but the erythritol production was manimal in the range of 5 to 10% of dissolved oxygen. Under the optimal the rane of 5 to 10% of dissolved oxygen. Under the optimal culture condition of the fermentor, a final erythritol concentration of 200 gI was obtained after 120 h with a yield of 50% and the productivity was 1.67 g/I/h. The yield was the highest among erythritol-producting microorganisms

• KSBB Journal
• /
• v.11 no.4
• /
• pp.438-444
• /
• 1996

Using recombinant Vaccinia virus(vSC8) that express ${\beta}$-galactosidase, a model heterologous protein, conditions for virus and protein production were investigated in tissue culture flask. As host animal cells HeLa and HeLa S3 were used. It was demonstrated that cells infected during the exponential growth phase gave higher protein yield than those infected during the stationary growth phase and calf serum concentration after virus infection did not significantly alter protein yield. Pretreatment of cell layer with hypotonic solution enhanced the virus infectivity. Optimum cell growth and recombinant protein production was achieved at $37^{\circ}C$. But, during 2 hours of virus infection period incubation temperature must be lowered to 20∼$30^{\circ}C$ for maximum recombinant protein yield. To enhance virus replication, the effects of adrenal glucocorticoid hormone (Dexamethasone) and silkworm hemolymph were evaluated. Only dexamethasone increased about 20% of ${\beta}$-galactosidase yield in HeLa S3 cells when added with 10-7∼10-5M concentration 24 hours before infection.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.614-622
• /
• 2014

Melons (Cucumis melo L.) are generally grafted onto Cucurbita rootstocks to manage soilborne pathogens such as Monosporascus root rot and v ine decline (MRR/VD) and Fusarium wilt. However, g rafting onto Cucurbita rootstocks reportedly results in the reduction of fruit quality. In this study, the resistance to MRR/VD, yield, and fruit quality of melons grafted onto melon rootstocks were evaluated under greenhouse conditions. Eight melon rootstocks (R1 to R8) were used and the inodorus melon 'Homerunstar' was used as scion. Melon rootstocks R1 to R6 were selected based on resistance to MRR/VD under greenhouse conditions. Non-grafted 'Homerunstar' and plants grafted onto squash interspecific hybrid 'Shintozwa' rootstock (Cucurbita maxima D. ${\times}$ C. moschata D.) served as controls. Grafted melons were cultivated in the greenhouse infested with Monosporascus cannonballus during two growing seasons (summer and autumn). The responses to MRR/VD, yield, and fruit quality differed depending on the rootstocks and growing season. The melons grafted onto 'Shintozwa' exhibited less severe disease symptoms and higher survival rates than non-grafted melons in both seasons. While the melon rootstocks in the summer cultivation did not increase the survival rate compared to non-grafted melons, the melon rootstocks R1 and R2 in the autumn cultivation led to higher survival rates. The melon rootstocks resistant to MRR/VD increased the percentage of marketable fruits and marketable yields. Grafting onto the melon rootstocks caused little or no reduction of fruit quality such as low calcium content, fruit softening, and vitrescence, especially in lower-temperature autumn season. Accordingly, these results suggest that grafting onto the melon rootstocks may increase the tolerance to MRR/VD and the marketable yield without a reduction of fruit quality.