• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.177-187
• /
• 2004

This investigation attempts to analyze the flexural behavior of a strengthened beam with carbon fiber sheets in three stages according to the conditions of the constituents : elastic stage, pre-yielding stage, and post-yielding stage. The proposed analytical method for strengthened beams is compared with the experimental results such as yield load, ultimate load, and flexural rigidities. The contributions of the constituents to the strengthened beam capacity are examined from the flexural analysis. The validity of using KCI strength method to estimate ultimate moment of a strengthened beam is also investigated.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.28-31
• /
• 2005

To extract apple pectins, apple pomace (AP) was extruded under 14 different conditions of screw speed (250-350 rpm), feed rate of 30-40 kg/hr, and 20-30% moisture content using twin-screw extrusion. Response surface methodology (RSM), based on three variables by three-level factorial design, was employed to investigate effects of screw speed, feed rate, and moisture on dependent variables of extrudates, soluble dietary fiber (SDF), yield of anhydrogalacturonic acid ($Y_{AGA}$) representing pectin, and intrinsic viscosity ([${\eta}$]). Second order models were used to generate three-dimensional response surface for dependent variables, and their coefficients of determination ($R^2$) ranged from 0.96 to 0.99. Moisture content showed highest effect on solubilization of AP.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.387-395
• /
• 2011

In the construction of tall-building, concrete pumping influences the success of the project. In order to establish pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So in this study, the characteristics including the inner pipe pressure, rheological properties of concrete and mortar through the continuous pumping test were evaluated. Then we analyzed the relations between rheological properties and pumpability. In the result of test, there are high correlations between the rheological characteristics which represented by yield stress and plastic viscosity and pressure loss with pipe length. Also, we estimated pressure loss according to conditions of concrete mix and pumping through the evaluation of inner pipe friction.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.94-98
• /
• 2000

To produce liquor and vinegar using potatoes needs to liquefy and sacchrify potatoes . So selecting the efficient fermenter for proceeding these process successfully is very important . This study was investigated several fermenter and crush types of potatoes for alcohol fermentation. Final sugar contents was high in pottoes saccharificatiion by nuruk or crude enzyme. But pure enzyme and blucoamylase ended liquefaction and saccharificatiion within short ime. So complex type fermenter mixed several fermenters was superior to single type fermenter. Complexfermenter III using crude enzyme and glucoamyulase saccharificed excellently potatoes with 150% of water contents by treatment of 3 hours. Through alcohol fermentation using pressure steamed potatoes (PSP), it could be obtained 6.4% , 150%, of alcohol content and yield. However to perform a series process efficiently , crush steamed pottoes (CSP) was suitable. When it was fermented after saccharification using crush steamed potatoes and complex fermenter III, it could be obtained 6.6% of alcohol and 6.7% of acidity.

• Plant Resources
• /
• v.5 no.1
• /
• pp.70-73
• /
• 2002

To develop an optimal storage method of root of Angelica acutiloba Radix, which has been grown as major herbal medicine material to be cultivated, root of Angelica acutiloba Radix, was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between packing materials but was significantly different between sealing conditions. In conclusion, vacuum packing and complete sealing with polyethylene film appears to be most optimal for storage of Angelica acutiloba Radix.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.33-40
• /
• 1998

Although a structural analysis based on e linear elastic theory yields good results for deformations and stresses produced by working loads, it fails to assess the teal load-carrying of the plates on the verge of yielding. In case of a limit analysis of plates, the yield line theory is widely used on the basis of the upper bound theorem and theoretically it overestimates the strength of the plate. There is, therefore, a general need for analytical methods of predicting the inelastic behavior and load-carrying capacities of plate subjected to arbitrary loadings and boundary conditions. The $\rho$-version of finite element method has been presented for determining the accurate limit load of plates. The numerical results by $\rho$-version model compares with the results obtained by the h-version software ADINA as well as with the available analytical solutions in literatures.

• Journal of the Korean Society of Tobacco Science
• /
• v.8 no.2
• /
• pp.29-41
• /
• 1986

Effects of some mineral nutrients on the chlorine absorption by the plants, on the chemical constituents and physical properties of leaves were investigated tinder the paddy field and pot conditions. The chlorine content of cured leaf grown in paddy field was high in iron and manganese application groups and highest in combined application of iron and manganese. Lime application inhibited the absorption of chlorine and increased the yield and quality of cured leaf, and inhibited the absorption of iron and manganese those causing the grey leaf. Lime application reduced the leaf chlorine content and rate of muddy grey leaf by increasing the soil pH in acid soil.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1242-1248
• /
• 2006

Densification behavior of nanocrystalline titania powder was investigated under cold compaction. Experimental data were obtained under triaxial compression with various loading conditions. Lee and Kim proposed the Cap model by developing the parameters involved in the yield function of general Cap model and volumetric strain evolution under cold isostatic pressing. The parameters in the Drucker/Prager Cap model and the proposed model were obtained from experimental data under triaxial compression. Finite element results from the models were compared with experimental data for densification behavior of nanocystalline ceramic powder under cold isostatic pressing and die compaction. The proposed model agreed well with experimental data under cold compaction, but the Drucker/Prager Cap model underestimated at the low density range. Finite element results, also, show the relative density distribution of nanocystalline ceramic powder compacts is severe compared to conventional micron powder compacts with the same averaged relative density.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2018

Cu-Fe alloys (CFAs) are much anticipated for use in electrical contacts, magnetic recorders, and sensors. The low cost of Fe has inspired the investigation of these alloys as possible replacements for high-cost Cu-Nb and Cu-Ag alloys. Here, alloys of Cu and Fe having compositions of $Cu_{100-x}Fe_x$ (x = 10, 30, and 50 wt.%) are prepared by gas atomization and characterized microstructurally and structurally based on composition and powder size with scanning electron microscopy (SEM) and X-ray diffraction (XRD). Grain sizes and Fe-rich particle sizes are measured and relationships among composition, powder size, and grain size are established. Same-sized powders of different compositions yield different microstructures, as do differently sized powders of equal composition. No atomic-level alloying is observed in the CFAs under the experimental conditions.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.344-347
• /
• 1992

Simultaneous liquefaction and cyclodextrin (CD) production were conducted on potato starch using cyclomaltodextrin glucanotransferase (CGTase) from a mutant strain MNNG 8 of Bacillus stearothermophilus No. 239. A high concentration (30%) of potato starch was converted to cyc1o-dextrins (CDs) with 29% yield in the conditions of pH 6.0, temperature $80^{\circ}C$, 4.3 mM $CaCl_2$, CGTase addition of 3.0 dextrinizing activity unit (DAU) at $40^{\circ}C$/g starch.