• Journal of Hydrogen and New Energy
• /
• v.32 no.3
• /
• pp.149-155
• /
• 2021

Most of the reformer experiments have been conducted only in high-temperature operation conditions above 700℃. However, to design high efficiency solid oxide fuel cell, it is necessary to test actual reaction performance in mid-temperature (550℃) operation areas. In order to study the operation characteristics and performance of commercial reforming catalysts, a reforming performance experiment was conducted on mid-temperature. The catalysts used in this study are Ni-based FCR-4 and Ru-based RuA, RuAL. Experiments were conducted with a Steam-to-carbon ratio of 2.0 to 3.0 under gas hourly space velocity (GHSV) 2,000 to 5,000 hr-1. As a result, RuA and RuAL catalysts showed similar gas composition to the equilibrium regardless of the reforming temperature. However, the FCR-4 catalyst showed a lower hydrogen yield compared to the equilibrium under high GHSV conditions.

• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.110-117
• /
• 2023

Cordycepin (3'-deoxyadenosine) is a nucleoside analog known for its diverse range of biological activities. This study investigated the effect of different types of sawdust on the production of the bioactive compound cordycepin. The results of the study showed that different types of wood sawdust affected the biosynthesis of cordycepin and a significant increase was observed when the conventional SDB medium was replaced with 1% NaOH treated pine sawdust. To optimize cordycepin production from Paecilomyces tenuipes in a medium containing 1% NaOH-pretreated pine sawdust, we employed Response Surface Methodology (RSM) in its Box-Behnken design (BBD) canonical form. The optimal conditions were determined as follows: a particle size of 109.5111-mesh (140 ㎛) for 1% NaOH-pretreated pine sawdust, an input weight of 21.1679 g/L, and an incubation time of 73.8423 hours. According to our model, this combination is expected to yield a maximum cordycepin content of 896.1428 ㎍/mL. Experimental validation of this prediction was performed using the suggested optimal conditions, resulting in an average cordycepin content of 922.6771 ㎍/mL across three replicates, thus confirming the model's accuracy.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.100-100
• /
• 2022

This study was conducted in 2021 using Kwangpyeongok and Gangdaok, that showed good yield performance both under upland and lowland conditions in the previous year. The experiments were carried out by sowing on April 22, May 14, May 30, June 19, and July 10, with aim to determine optimum sowing date in central region of Korea. The growing degree days (GDD) required to read the flowering stage were 1375.5-1725.3℃ for upland and 1582.7-1982.4℃ for lowland condition. The lowest GDD was observed in July 10 sowing regardless of ridge formation both under lowland and upland conditions for Kwangpyeongok. However, Gangdaok showed the lowest GDD under no-ridge in lowland and high-ridge in upland, both of which were sown on June 19. The difference in GDD between no-ridge and high-ridge treatment was little depending on the sowing date. In both lowland and upland, there was no significant difference between no-ridge and high-ridge treatments in stover dry matter, ear dry matter, and TDN between no-ridge and high-ridge treatments. Under upland condition, no significant difference in biomass and TDN was observed among sowing date treatments and between varieties. Under lowland condition, biomass production was severely reduced in May 30 sowing treatment, whereas no varietal difference was observed. Reduced biomass in May 30 sowing treatment may be due to excess waterlogging and lodging by rainfall.

• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.1
• /
• pp.29-38
• /
• 2024

Wastewater management is increasingly emphasizing economic and environmental sustainability. Traditional methods in sewage treatment plants have significant implications for the environment and the economy due to power and chemical consumption, and sludge generation. To address these challenges, a study was conducted to develop the Intermittent Cycle Extended Aeration System (ICEAS). This approach was implemented as the primary technique in a full-scale wastewater treatment facility, utilizing key operational factors within the standard Sequencing Batch Reactor (SBR) process. The optimal operational approach, identified in this study, was put into practice at the research facility from January 2020 to December 2022. By implementing management strategies within the biological reactor, it was shown that maintaining and reducing chemical quantities, sludge generation, power consumption, and related costs could yield economic benefits. Moreover, adapting operations to influent characteristics and seasonal conditions allowed for efficient blower operation, reducing unnecessary electricity consumption and ensuring proper dissolved oxygen levels. Despite annual increases in influent flow rate and concentration, this study demonstrated the ability to maintain and reduce sludge production, electricity consumption, and chemical usage. Additionally, systematic responses to emergencies and abnormal situations significantly contributed to economic, technical, and environmental benefits.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4647-4658
• /
• 2023

In this paper, elastic-plastic fracture mechanics analysis is performed to determine the critical crack sizes of the multipurpose canister (MPC) manufactured using austenitic stainless steel under dynamic loading conditions that simulate drop accidents. Firstly, dynamic finite element (FE) analysis is performed using Abaqus v.2018 with the KORAD (Korea Radioactive Waste Agency)-21 model under two drop accident conditions. Through the FE analysis, critical locations and through-thickness stress distributions in the MPC are identified, where the maximum plastic strain occurs during impact loadings. Then, the evaluation using the failure assessment diagram (FAD) is performed by postulating an external surface crack at the critical location to determine the critical crack depth. It is found that, for the drop cases considered in this paper, the principal failure mechanism for the circumferential surface crack is found to be the plastic collapse due to dominant high bending axial stress in the thickness. For axial cracks, the plastic collapse is also the dominant failure mechanism due to high membrane hoop stress, followed by the ductile tearing analysis. When incorporating the strain rate effect on yield strength and fracture toughness, the critical crack depth increases from 10 to 20%.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.72-75
• /
• 2011

Purpose: The HSV1-tk reporter gene system is the most widely used system because of its advantage is that it is possible to monitor directly without the introduction of a separate reporter gene in case of HSV1-tk suicide gene therapy. This study was performed to automate 9-(4-[$^{18}F$] Fluoro-3-hydroxymethylbutyl) guanine ([$^{18}F$] FHBG) that are widely used as substrate for the HSV1-tk reporter gene in living organisms with positron emission tomography (PET) and find the optimized conditions of synthesis. Materials and Methods: Fully automated synthesis of [$^{18}F$] FHBG was performed using Explora-RN (CTI, USA) module. We have changed of reaction time (3, 5, 10 min) and temperature (110, 120, $130^{\circ}C$) for the optimized conditions of synthesis. Also we experimented to find the optimal concentration of precursor (5, 7, 10 mg). Results: [$^{18}F$] FHBG was purified by HPLC system and collected at around 10-12 min. Synthesis using Explora-RN module showed a $32.0{\pm}1.2%$ yield of radiochemical (decay corrected), the purity was greater than 98%. And the entire synthesis time was less than 48 min. Temperature of the highest synthesis yield was $130^{\circ}C$, reaction time was 5 minutes and concentration of precursor was 10 mg (recommended volume in manual) (n=36). In contrast to radiochemical yield of precursor 10 mg ($32{\pm}1.2%$), yield of 5 and 7 mg precursor was unstable. Conclusion: Automation of [$^{18}F$] FHBG synthesis at Explora-RN module has been completed. In addition, we were able to obtain optimized reaction time, temperature and concentration of precursor. Therefore this study would be provided more rapid synthesis and higher radiochemical yield.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.73-78
• /
• 2018

BACKGROUND: Soil salinity of reclaimed tidal land in Korea is highly important factor. High salinity is harmful to crop productivity. Jerusalem artichoke (Helianthus tuberosus L.) is known to be salt-tolerant and has high adaptability to diverse pedo-climatic conditions. The objective of this study was to assess the changes of soil properties and crop productivity according to salt concentration in the reclaimed tidal lands. METHODS AND RESULTS: Experimental sites were selected at Saemangeum ($35^{\circ}46^{\prime}N$, $126^{\circ}37^{\prime}E$) reclaimed tidal land, and their dominant soil series were Munpo (coarse loamy, mixed, non-acid, mesic, typic Fluvaquents). H. tuberosus L were collected from 12 locations across Korea. Tubers were planted at $75{\times}25cm$ with EC 2 to $7dS\;m^{-1}$. Soil samples were periodically collected from both 0~20 cm and 20~40 cm depths of each site. Soil salinity and soil moisture contents were varied depending on weather conditions. Soil electrical conductivity varied from 1.0 to $5.9dS\;m^{-1}$, and soil moisture contents varied from 9.2 to 28.7%. The white-colored tubers of H. tuberosus L. collected from 'Yeongwol-gun' exhibited the highest height (207 cm), followed by the white-colored tubers of H. tuberosus L. collected from 'Iksan-si'(202 cm). The white-colored tubers of H. tuberosus L. collected from 'GyeongJu-si' showed the highest yield (549 kg/10a). The purple-colored tubers of H. tuberosus L. collected from 'Yeongwol-gun' showed the highest yield (615 kg/10a). CONCLUSION: Our results indicate that the plant height and tuber yield did not appear to be correlated. Considering yield and inulin content, the GyeongJu-si seemed to be suitable as the white-colored tubers of H. tuberosus L. and the Yeongwol-gun seemed to be suitable as the purple-colored tubers of H. tuberosus L. in the reclaimed tidal lands. However, it is necessary to consider the relationship between the inulin content and the yield.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.1
• /
• pp.31-35
• /
• 1975

In order to gain information on the plant characteristics of high yielding paddy from the point of view of mineral nutrition and to learn more about soil conditions under which high yields are produced a number of soil samples collected from the field experiment carried out in The City College of Seoul were analysed. In addition, a laboratory experiment carried out to support the field experiment was also analysed. Results obtained are as follows: 1. Generally, the higher the yield of paddy, the higher is the potassium content in flag leaves, whereas the reverse is true for the content of Ca and Mg in the leaves. From these facts it can conceivably be said that the high yielding paddy should absorb a large quantity of potassium and a lesser quantity of calcium and magnesium in the reproductive stage. 2. Leaves of paddy which produced yields over 600kg/10a (a comparatively high yield in the experiment) contained 30-35mg/100g of potassium, less than 25me/100g of calcium, and 10me/100g of magnesium which brings the ratio of $K/{\sqrt{Ca+Mg}}$ over 5. 3. Correlation studies indicated a remarkable relationship between the paddy yield and exchangeable potassium in soil samples taken after harvesting. A similar relationship was observed between the yield of paddy and $K/{\sqrt{Cae+Mge}}$ ratio of the soil samples. 4. A regression between yield of padcy (Y) and exchangeable potassium (Ke) or $K/{\sqrt{Ca+Mg}}$ in soil samples taken after harvesting was shown to be; Y=183.95+2135.86Ke $$Y=352.45+3114.454\;K/{\sqrt{Ca+Mg}}$$ 5. The regression between exchangeable potassium (Ke) in soil samples taken after harvesting and the amount of lime (L) and potassium (P) to be applied is; $$Ke=0.1246+0.00007037L+0.004444P+0.000004444L{\cdot}P$$.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1181-1186
• /
• 2013

Due to climate change, the occurrence of abnormal weather conditions has become more frequent, causing damage to vegetable crops grown in Korea. Hot pepper, Chinese cabbage and radish, the three most popular vegetables in Korea, are produced more in the field than in the greenhouse. It has been a trend that the time for field transplanting of seedlings is getting earlier and earlier as the spring temperatures keep rising. Seedlings transplanted too early in the spring take a longer time to resume the normal growth, because they are exposed to suboptimal temperature conditions. This study examined the influence of air temperature during seedling growth on the time required to reach the first fruit maturity and yield of hot pepper. Seedling plants of 'Super Manita' hot pepper was grown in temperatures $2.5^{\circ}C$ and $5.0^{\circ}C$ lower than the optimum temperature (determined by the average of temperatures for the past 5 years). Seedlings were transplanted into round plastic containers (30-cm diam., 45-cm height) and were placed in growth chambers in which the ambient temperature was controlled under natural sunlight. The growth of seedlings under lowered temperatures was reduced compared to the control. The mineral (K, Mg, P, N) concentrations in the leaf tissues were higher when plants were grown with the ambient temperature $2.5^{\circ}C$ lower than the optimum, regardless of changes in other growth parameters. Tissue calcium (Ca) concentration was the highest in the plants grown with optimum temperature. The carbohydrate to nitrogen (C/N) ratio, which was the highest (18.3) in the plants grown with optimum temperature, decreased concomitantly as the ambient temperature was lowered $2.5^{\circ}C$ and $5.0^{\circ}C$. The yield of the early harvested fruits was also reduced as the ambient temperature became lower. The first fruit harvest date for the plants grown with optimum temperature (June 27) was 13 days and 40 days, respectively, earlier than that in plants grown with $2.5^{\circ}C$ (July 10) and $5.0^{\circ}C$ (Aug 6) lower ambient temperatures. The fruit yield per plant for the optimum temperature (724 g) was the greatest compared to those grown with $2.5^{\circ}C$ (446 g) and $5.0^{\circ}C$ (236 g) lower temperatures. The result of this study suggests that the growers should be cautioned not to transplant their hot pepper seedlings too early into the field, since it may delay the time of first harvest eventually reducing total fruit yield.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.3
• /
• pp.262-273
• /
• 2010

In the enzymatic hydrolysis of rice straw and wood meals using extra-cellular enzymes from Fomitopsis palustris, key factors which enhanced the sugar conversion yield were investigated in this work, such as enzyme production and enzyme reaction conditions, surfactant effects, and the surface structure of substrates. F. palustris cultured with softwood mixture produced 12.0 U/$m{\ell}$ for endo-${\beta}$-1,4-gulcanase (EG), 116.68 U/$m{\ell}$ for ${\beta}$-glucosidase (BGL), 18.82 U/$m{\ell}$ for cellobiohydrolase (CBH), and 13.33 U/$m{\ell}$ for ${\beta}$-xylosidase (BXL). These levels of BGL, CBH, and BXL activities were two to four folds more than enzyme activities of F. palustris cultured with rice straw. The optimum reaction conditions of cellulase-RS which produced by F. palustris with rice straw and cellulase-SW which produced by F. palustris with softwood mixture were pH 5.0 at $45^{\circ}C$ and pH 5.0 at $50^{\circ}C$, respectively. The sugar conversion yield of cellulase-SW had the highest value of $40.6{\pm}0.6%$ within 72 h when rice straw was used as substrate. By adding 0.1% Tween 20 (w/w-substrate), the sugar conversion yield of rice straw was increased to 44%, which was about four fifths sugar conversion yield of commercial enzyme, Celluclast 1.5L (Novozyme A/S). A low crystallinity and an intensive fibril surface observed by the scanning electron microscope may explain the high sugar conversion yield of rice straw.