• Fibers and Polymers
• /
• v.5 no.2
• /
• pp.128-133
• /
• 2004

This paper reports the effects of bleaching of alpaca tops and dyeing of bleached alpaca tops/yarns on the quality of tops and yarns. A dark brown alpaca top was bleached with hydrogen peroxide. Two bleaching methods were tried for effectiveness of color removal. A portion of each bleached top was dyed after bleaching. Color parameters were examined for unbleached, bleached and bleached/dyed tops, these tops were then converted into yarns of different twist levels and counts using a worsted spinning system. Some of the bleached yarn from each bleaching method was dyed in a package dye vat to compare the difference of top dyeing versus yarn package dyeing on yarn quality. Fiber diameter, yarn strength, yarn evenness, yarn hairiness and fiber degradation were tested to examine the effects of bleaching and dyeing on these properties at top and yarn stages. A processing route for bleaching and dyeing alpaca fiber was recommended.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.16-22
• /
• 2006

Process contract has received considerable attention in silk degumming processes because of its critical role in quality assurance. In degumming, process exhibits shrinkage of high twisted yarn and lot-varying behavior, thus increasing the difficulties of reduction by conventional means. This necessitates the application of a package that adapts to changing degumming process, and a new approach involving package degumming is proposed. The gains of this process are prevent of shrinkage by package winding, which is simplified by reduced soft-winding or re-twisting process. The approach is expected to achieve high quality results in conventional process due to its feature of demage by tension and rubbing. Therefore package degumming has many merits such as reduce of pilling and shrinkage, production expenses saving by process contract are expected of the simplified degumming process.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.35-49
• /
• 2015

This paper investigated optimum process conditions of coating yarn for awning fabric. For this purpose, the simulation for processability and yarn quality using SPSS statistics package was carried out, and PP/TPO and PET/PVC coating yarns specimens were made with variation of extruder temperature and feed speed of core yarn on the yarn coating machine for examining simulation result. It was revealed that optimum coating conditions of PP/TPO 1000d coating yarn were extruder temperature $150^{\circ}C$, and core yarn feed speed 400~500m/min. Mechanical property and thermal shrinkage of PP/TPO coating yarn made at this conditions were best and core evenness rates of these coating yarns by yarn compression tester were also superior, which was certified by SEM photograph. In addition, these experimental results were coincided with simulation results. It was found that, in PET/PVC coating yarn, yarn physical properties between 1500d and 1200d coated yarns were not shown any difference, and core evenness rates of these coating yarns were superior. It revealed and concluded that these simulated coating conditions are applicable to production field.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.429-439
• /
• 2000

This study was aimed to investigate the handle and mechanical properties of silk woven fabrics according to the fabric structure and yarn types 56 male and female students evaluated 16 black specimens with semantic differential scale of 20 hand adjectives. Mechanical parameters such as surface properties, bending properties and compression properties were tested using by KES-FS system. Data were analyzed through factor analysis, pearson correlation coefficient and t-test using PC SAS package. The results were as follows: The hand adjectives were grouped as 4 'surface roughness', 'flexibility', ;sense of thermal', and 'dryness'. 'Surface roughness' was highly sensed at satin fabrics of hard-twist yarn, noil yarn and spun yarn, while it was not at the fabrics of normal satin and twill at all. 'Flexibility' was reverse to 'surface roughness'. Thermal sense was felt highly at satin fabrics of noil-yarn, while low at plain fabrics of normal yarn. 'Dryness' was high at satin fabrics of hard-twist yarn and while it was low at normal satin fabrics. Predicted equations for subjective hand from mechanical properties of fabrics were developed using Stevens's law and stepwise regression and the coefficients of determination were high.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3156-3161
• /
• 2007

In the field of yarn dyeing, the most generally employed method is a type of package dyeing which uses a package of cheeses stacked on a spindle made of a perforated tube. In order to understand the process of level dyeing, it is essential to perform a study of the porous flow through the spindle for the cheese dyeing method. In this paper, the axisymmetric, incompressible, Navier-Stokes equations are solved for several spindle configurations using a fully implicit finite volume scheme. For investigating the flow patterns through the spindle, porous diameter and porosity is varied in the present study. The computational results show that the total pressure loss depends only on the velocity of inflow regardless of porous diameter and porosity and a large percentage of the mass flow rate through the spindle is discharged at the upside of the spindle. Therefore, it is required to design a new spindle to obtain the level dyeing.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.456-459
• /
• 2008

In the field of yarn dyeing, the most generally employed method is a type of package dyeing which uses a package cheesesstacked on a spindle made of a perforated tube. Spindles up to now, have been designed without considering the characteristics of dyeing liquid, focusing only on the geometric configuration which cause many problems such as lack of level dyeing. To improve the level dyeing and find the appropriate spindle configuration for the most effective dyeing process, this study examines the spindle flow-field in detail, using a computational method. Flow characteristics inside the spindle have been investigated with varying in porosity, porous diameter and the velocity of the flow. The results show that the total pressure of the flow through the spindle is used to overcome body force. The characteristics of the flow from the porous spindle could also be observed. Based on the results from this study, an effective spindle configuration for level-dyeing has been proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.133-139
• /
• 2003

Direct motor-driven winding has been increasingly applied in winding machinery. However, it is necessary to analyze the kinematics of winding prior to developing the winding control algorithm, because direct motor-driven winding machine should be operated in accordance with the pre-determined kinematic information for the winding control. This paper presents the kinematics of the degressive winding method and its kinematic winding control algorithm in order to wind the required volume of a pirn package in a desired shape. The proposed algorithm can give the appropriate yarn speed, traverse speed, and the spin speed of the spindle at every traverse stroke, which are utilized for controlling the spindle motor and traverse motor of the winding machine. Computer winding simulations showed that the proposed algorithm is successful in the degressive pirn winding.

• 연구논문집
• /
• s.34
• /
• pp.87-99
• /
• 2004

A spring tension control device is used as a very important part of an twister system. The friction force of tensioner must keep same friction force during winding in package. For satisfy this function, many device used common compression coil spring. In this paper, by using the case-building technique which was based on simple theory that unknown design variables are induced by given input design variables by the designer, design automation algorithm about rectangular section compression springs with elastic characteristic is developed. Four design equation are justified in using of analysis of torsion of straight bar of rectangular section and geometrical condition of coil spring. Four design equation and nine design variables are computed by case-building technique.

• Archives of design research
• /
• v.15 no.1
• /
• pp.359-368
• /
• 2002

Fabric art is most distinguished field among the Modern art. Among them, tapestry which begins human history is investigated more and more deeply and till now it displays with various type and exhibition. But, because of the huge scale of the working process, it requires much time and hard endeavor. After sampling, it begins main process in the present situation. But we cannot know exactly whether it goes well or not until it ends. So after fulfilled whole process, we often try new work again. Because of this reason, we devise computer simulation. With computer simulation we can preview whole working and lengthen the planning time, shorten the needless time. Simulation is made up of Scan, Drawing, Line clean up, Rendering, Parity, and Printing. Scan and Drawing can male new idea. And during the Line clean up we can make vector image and modify the image. And then rendering the image and inquiring the length and weight of yarn. Last process is printing an then making a package soft ware by means of prototype. Through these process, many producers and student can easily access to tapestry and reduce the needless time and endeavor.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.373-381
• /
• 2011

This study focused on investigating factors of partnership formation for transactional enterprises on supply chain to form a transactional relationship centering around textile industry in Daegu and Gyeongbuk. The study also investigated the effect of the factors of partnership formation for mutual cooperation among textile manufacturers in Daegu and Gyeongbuk on partnership outcomes, and finally provided basic information that help enterprises form efficient partnership relationships with related manufacturers. The sample of the study was manufacturers of yarn, dyeing, weaving, process and fabrics in Daegu and Gyeongbuk that are registered on Korea Federation of Textile Industries. The total of 81 responses were used for data analyses, and factor analyses, regression analyses, and ANOVA were utilized appling SPSS 14.0 Package. The results of the research were as follows: First, among partnership formation factors mutual confidence was highly related to presentation of exclusive technological information, efforts to keep relationships between enterprises, presentation of information, and transactions between reliable enterprises that were formed despite of any losses. Second, it was also important that enterprises exchange and communicate their business goals with partners by having common goals. Third, it was also important that problems and damages were informed to and were shared with transaction companies. If conflicts between enterprises occurred, they can be smoothly solved based on the partnership formation. Fourth, enterprises form partnerships with transaction companies by considering their operation abilities. Fifth, transactions with enterprises which are mutually reliable and have superior technology and information contributed a lot to economic outcome. Lastly, the study revealed that among partnership formation factors mutual confidence to transaction companies influenced outcome of mutual confidence profit creation, outcome of technology & information efficiency were closely related to the ability to solve generated problem, and an important factor of the outcome of technology & information profit creation was communication.