• 공업화학
• /
• 제29권1호
• /
• pp.56-61
• /
• 2018

황-요오드(SI) 공정의 통합 운전을 위한 분젠 반응 단계에서, $I_2$ 및 $H_2O$ 반응물들은 $HI_x$ 용액 내 용해된 성분들로써 공급된다. $HI_x$ 용액과 $SO_2$ 공급을 이용하여 분젠 반응이 수행될 때 $HI_x$ 상 내 대부분의 $H_2SO_4$ 생성물이 존재하며, 이에 따라 $HI_x$ 상에 대한 $H_2SO_4$ 상의 부피 비가 매우 낮다. 본 연구에서 우리는 상 분리 성능을 향상시키기 위해 $HI_x$ 용액을 이용한 분젠 반응에 대한 초음파 조사의 효과들을 연구하였다. 분젠 반응과 함께 초음파가 조사될 때 $HI_x$ 상으로부터 $H_2SO_4$ 상으로 이동된 $H_2SO_4$의 양은 최대 58.0 mol%까지 증가하였으며, $H_2SO_4$ 상의 부피 또한 최대 13.1 vol%까지 증가하였다. 특히, 상 분리에 대한 초음파 조사의 효과는 온도, $I_2$ 및 $H_2O$ 공급 농도가 감소함에 따라 향상되었다. 초음파 조사는 $HI_x$ 상 내 반응 평형을 미시적으로 이동시킴으로써 추가적인 $H_2O$ 분자들의 형성을 유도하였다. 이로부터 추가적으로 생성된 $H_2O$ 및 분리된 $H_2SO_4$ 분자들이 $H_2SO_4$ 상으로 이동할 수 있는 더 많은 $H_2SO_4{\cdot}xH_2O$ (x = 5-6) 착물들을 형성하였다.

• 분석과학
• /
• 제13권2호
• /
• pp.208-214
• /
• 2000

수산화물, 탄산염 및 수산화아파타이트(HAp)의 형성과 해리는 용액의 pH에 따라 달라지며 $Ca-PO_4-H_2O$계로부터 균질하고 미세한 HAp, $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$, 세라믹 분말을 제조하는데 매우 중요한 인자가 된다. 각 복합이온의 용해도는 pH와 직선적인 관계에 있으므로 용해도 도형은 수산화물, 탄산염 및 수산화아파타이트(HAp)의 평형상수와 용해도적으로부터 계산된 대수 몰농도로 그릴 수 있다. $Ca-PO_4-H_2O$계로부터 $25^{\circ}C$에서 단일상의 $Ca_{10-x}(HPO_4)_x(PO_4)_{6-x}(OH)_{2-x}(x=0)$ 분말을 제조하기 위한 최적의 pH조건은 이론적인 고찰 결과 $10.5{\pm}0.5$로 결정되었다. 실온에서 제조하여 $80^{\circ}C$에서 건조시킨 HAp분말은 75nm의 입자크기를 갖는 미세한 응집분말 이었으며, $1,000^{\circ}C$에서 하소시킨 HAp분말은 450nm 크기의 거의 균질한 형태의 분말을 얻었다. HAp분말들이 응집되어 있었지만 소결후 미세구조는 양호하여 우수한 기계적 특성을 보유하였다.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.513-518
• /
• 2003

La/sub 2/3-x/Li/sub 3x/□/sub 1/3-2x/TiO₃ compounds with x=0.13 and 0.12 were prepared by slow cooling (x=0.13) and rapid quenching (x=0.12) into the liquid nitrogen after sintering at 1350℃ for 6 h. Their crystal structure has been determined by Rietveld refinement of both the powder neutron and X-ray diffraction data. From neutron diffraction data, we found that the main phase was not tetragonal (P4/mmm), but trigonal (R3cH). The refinement of neutron diffraction for the slow cooled samples were in a good agreement with a new model; a mixture of trigonal (R3cH, 45.7 wt％), tetragonal (p4/mmm, 37.0 wt％), and Li/sub 0.57/Ti/sub 0.86/O₂(pbnm, 17.2 wt%), but the quenched sample was found not to contain tetragonal (p4/mmm). X-ray diffraction data couldn't be well fitted because of the Poor scattering factor of lithium ions and the similar reflection patterns among trigonal (R3cH), tetragonal (p4/mmm), and cubic (Pm3m). We also knew that one transport bottlenecks is destroyed by one La vacancy in the case of trigonal (R3cH).

• 공업화학
• /
• 제9권4호
• /
• pp.585-590
• /
• 1998

섬유상의 $Na_xTi_nO_{2n+1}$는 층상구조의 $H_2Ti_4O_9{\cdot}nH_2O$에대한 $H^+/Na^+$의 이온교환에 의해서 합성되었다. 이온교환 반응은 0.5~2.0 M NaOH 용액에서 이루어졌으며, 2.0 M NaOH의 용액에서 이온 교환할 때 73%가 치환되었다. 이 때 길이가 $10{\sim}20{\mu}m$이고 직경이 약 $0.7{\mu}m$인 비교적 균일한 형태의 섬유상을 얻을 수 있었다. 그리고 층상구조의 티탄산나트륨에 대한 상전이는 열분석을 통해 확인하였으며, 이 결과 $Na_xTi_nO_{2n+1}$ 섬유는 $200{\sim}600^{\circ}C$의 온도에서 $Na_2Ti_6O_{13}$과 $TiO_2$로 분해되었다.

• 대한화학회지
• /
• 제30권5호
• /
• pp.441-448
• /
• 1986

몰리브덴산암모늄 수용액에서 적절한 살리실알데히드의 메탄올 혼합용액으로부터 디옥소비스(치환-살리실알데히다토) 몰리브덴늄(VI), $MoO_2(X-sal)_2(X=H,\;5-CH_3)$착물을 합성하고, 이들 각각의 화합물과 다양한 일차아민의 반응에 의하여 디옥소비스(치환-살리실알디미나토) 몰리브덴늄(VI)착물, $MoO_2(X-sal-N-R)_2,\;(R=C_6H_5,\;p-F-C_6H_4,\;m-Cl-C_6H_4,\;p-I-C_6H_4$ 및 $p-C_2H_5-C_6H_4)$을 합성하였다. 이들 착물은 모두 $900{\sim}940cm^{-1}$ 부근에서 ${\upsilon}_{Mo}=0$에 기인한 두 개의 강한 흡수띠가 관찰되었고, 핵자기공명스펙트럼에서 N=CH양성자에 대한 한 개의 시그날이 8.9ppm부근에서 나타났다. 이는 이들 착물이 $cis-MoO_2$기를 가진 6배위팔면체 착물임을 나타낸다. 질량분석의 결과로부터, $MoO_2$ : ligand의 결합비가 1:2임을 확인하였고, $MoO_2(5-CH_3-sal-N-R)_2$착물에 대한 분해과정을 조사하였다. 전자흡수스펙트럼에서 $N{\to}Mo$와 $O{\to}Mo$에 해당하는 전하이동전이는 $29,000cm^{-1}$과 $32,000cm^[-1}$부근에서 각각 일어났다. 한편, 디메틸포름아미드에서 측정한 이들 착물에 대한 몰전도도로부터 이들 착물이 비이온성 물질임을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.265-268
• /
• 1999

In this study, we investigated the electromagnetic Properties of M $n_{Y}$Z $n_{1-x}$ F $e_{x}$ $O_4$(X=0.67~0.69, Y=0.13~0.19) doped with and without H $o_2$ $O_3$(each of 0.05~ 0.2wt%, step 0.05wt%). The greatest initial permeability of composition is M $n_{0.17}$Z $n_{0.16}$F $e_{0.67}$ $O_4$. As X and Y components, increased. generally resistivity slightly change by the various X and Y components. The initial permeability of M $n_{0.17}$Z $n_{0.16}$F $e_{0.67}$ $O_4$ doped with H $o_2$ $O_3$ showed the about 2.5 times higher than that of M $n_{0.17}$Z $n_{0.16}$F $e_{0.67}$ $O_4$ doped without H $o_2$ $O_3$EX>EX>EX>X>>EX>EX>EX>X>

• 설비공학논문집
• /
• 제10권6호
• /
• pp.666-673
• /
• 1998

Solubilities (LiBr+$CaC1_2$) in water were measured at temperatures form 267.51 to 306.17K for $CaC1_2$ (LiBr+$CaC1_2$)=0.24 by mole. Experimental data were correlated with polynomial equations. Average absolute deviations between the measured and calculated values were 0.31% at concentration smaller than 60wt% and 0.41% at concentration larger than 60wt%, respectively. Vapor pressures were measured at temperatures from 296.75 to 436.75K and concentrations from 40 to 70wt%. Vapor pressure data were fitted to a Antoine-type equation and average absolute deviation was 2.98%. The P-T-X chart and H-T-X chart of $H_2O$/(LiBr+$CaC1_2$) system were constructed by using the correlation equations of solubility, vaper pressure, and heat capacity. The P-T-X chart indicates that $H_2O$/(LiBr+$CaC1_2$) system has potential as a possible working fluid for air-cooled absorption chillers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.340-342
• /
• 1995

We prepared $LiCo_{1-x}Ni_{x}O_2$ by reacting stoichiometric mixture of LiOH.$H_2O$, $CoCO_3$.$xH_2O$ and $Ni(OH)_2$(mole ratio respectively) and heating at $850^{\circ}C$ for 5n. In the result of X-ray diffraction analysis, along fluctuation of the function of x in $LiCo_{1-x}Ni_{x}O_2$(003) peak and (104) peak indensities and ratio were varied. We awared through XRD that from 0 to 0.5 at x in $LiCo_{1-x}Ni_{x}O_2$ is well formed for hexagonal structure at one step heat treatment($850^{\circ}C$), but if Ni involve at $LiCo_{1-x}Ni_{x}O_2$ hexagonal structure is not well formed. In the result of charge/discharge tests charge/discharge capacity and effiency is different about various cathode. Therefore, the appropriate charge/discharge method must be selected for good characteristics.

• Carbon letters
• /
• 제24권
• /
• pp.103-110
• /
• 2017

Carbon-based magnetic nanostructures in several instances have resulted in improved physicochemical and catalytic properties when compared to multi-wall carbon nanotubes (MWCNTs) and magnetic nanoparticles. In this study, magnetic MWCNTs with a structure of $Ni_xZn_xFe_2O_4/MWCNT$ as peroxidase mimics were fabricated by the one-pot hydrothermal method. The structure, composition and morphology of the nanocomposites were characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy and transmission electron microscopy. The magnetic properties were investigated with a vibrating sample magnetometer. The peroxidase-like catalytic activity of the nanocomposites was investigated by colorimetric and electrochemical tests with 3,3',5,5'-tetramethylbenzidine (TMB) and $H_2O_2$ as the substrates. The results show that the synthesis of the nanocomposites was successfully performed. XRD analysis confirmed the crystalline structures of the $Ni_xZn_xFe_2O_4/MWCNT$ nanohybrids and MWCNTs. The main peaks of the $Ni_xZn_xFe_2O_4/MWCNT$s crystals were presented. The $Ni_{0.25}Zn_{0.25}Fe_2O_4/MWCNT$ and $Ni_{0.5}Zn_{0.5}Fe_2O_4/MWCNT$ nanocatalysts showed nearly similar physicochemical properties, but the $Ni_{0.5}Zn_{0.5}Fe_2O_4/MWCNT$ nanocatalyst was more appropriate than the $Ni_{0.25}Zn_{0.25}Fe_2O_4/MWCNT$ nanocatalyst in terms of the magnetic properties and catalytic activity. The optimum peroxidase-like activity of the nanocatalysts was obtained at pH 3.0. The $Ni_{0.5}Zn_{0.5}Fe_2O_4/MWCNT$ nanocatalyst exhibited a good peroxidase-like activity. These magnetic nanocatalysts can be suitable candidates for future enzyme-based applications such as the detection of glucose and $H_2O_2$.

• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.116-123
• /
• 2007

[ $La_{0.5}Ce_{0.5}Co_{1-x}Cu_xO_{3-{\alpha}}$ ](X=0, 0.1, 0.3, 0.5) perovskites were prepared by coprecipitation method at pH 7 or pH 11 and its catalytic activity of selective CO oxidation was investigated. The characteristics of these catalysts were analyzed by $N_2$ adsorption, X-ray diffraction(XRD), SEM, $O_2$-temperature programmed desorption(TPD). The pH value at a preparation step made effect on particle morphology. The smaller particle was obtained with a condition of pH 7. The better catalytic activity was observed using catalysts prepared at pH 7 than pH 11. The maximum CO conversion of 98% was observed over $La_{0.5}Ce_{0.5}Co_{0.7}Cu_{0.3}O_{3-{\alpha}}$ at $320^{\circ}C$. Below $200^{\circ}C$, the most active catalyst was $La_{0.5}Ce_{0.5}Co_{0.9}Cu_{0.1}O_{3-{\alpha}}$, of which conversion was 92% at $200^{\circ}C$. By the substitution of Cu, the evolution of ${\alpha}$-oxygen was remarkably enhanced regardless of pH value at preparation step according to $O_2$-TPD. Among the different ${\alpha}$-oxygen species, the oxygen species evolved between $400^{\circ}C$ and $500^{\circ}C$, gave the better catalytic performance for selective CO oxidation including $La_{0.5}Ce_{0.5}CoO_3$ in which Cu was absent.