Park, Soo-Young;Han, Sang-Uk;Kim, Hyun-Hoo;Jang, Gun-Eik;Lee, Yong-Jun
Transactions on Electrical and Electronic Materials
/
제16권5호
/
pp.264-267
/
2015
AlCrNO cermet films were prepared on aluminum substrates using a DC-reactive magnetron sputtering method and a water-cooled Al:Cr target. The Al2O3/AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF)/Al/substrate of the 5 multi-layers was prepared according to the Ar and (N2 + O2) gas-mixture rates. The Al2O3 of the top layer is the anti-reflection layer of triple AlCrNO (LMVF)/AlCrNO (MMVF)/AlCrNO (HMVF) layers, and an Al metal forms the infrared reflection layer. In this study, the crystallinity and surface properties of the AlCrNO thin films were estimated using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), while the composition of the thin films was systematically investigated using Auger electron spectroscopy (AES). The optical properties of the wavelength spectrum were recorded using UH4150 spectrophotometry (UV-Vis-NIR) at a range of 0.3 μm to 2.5 μm.
Purpose: This study was done to compare heat applications by nurses in accordance to belief in evidence-based practice and behavior intention related to research. Methods: A cross-section survey design was used. Participants were 228 nurses from 5 institutions who completed the research questionnaire. Data were collected during July and August 2015. Results: The nurses reported that duration of heat applications was 2.5 minutes to 90 minutes. Frequently used heat application devices, in order of frequency, were rubber bag, gel pack and red clay pack. Most of the nurses (78%) responded that advice from colleagues was the most frequently used basic evidence for heat application. There was a statistically significant difference for the necessity of heat application practice guidelines between the high evidence-based practice belief cluster and the low cluster ($x^2$=15.39, p<.001). Conclusion: There were difficulties in providing consistent nursing interventions because of practical differences and absence of evidence-based guidelines for heat application. The researchers recommend that basic studies with various instruments be conducted and proper practice guidelines developed for heat application.
In this study, we mainly focus on the study of densification of gas-atomized Cu-50 wt.%In-13 wt.%Ga alloy powder without occurrence of crack during the forming process. Cu-50 wt.%In-13 wt.%Ga alloy powder was consolidated by sintering and rolling processes in order to obtain high density. The phase and microstructure of formed materials were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical microscopy (OM), respectively. Warm rolling using copper can result in the improvement of density. The specimen obtained with 80% of rolling reduction ratio at $140^{\circ}C$ using cooper can have the highest density of $8.039g/cm^3$.
Porous carbons have been widely used as electrode material for supercapacitors. However, commercial porous carbons, such as activated carbons, have low electrochemical performance. Nitrogen-doping is one of the most promising strategies to improve electrochemical performance of porous carbons. In this study, nitrogen self-doped porous carbon (NPC) is prepared from melamine foam by carbonization to improve the supercapacitive performance. The prepared NPC is characterized in terms of the chemical structures and elements, morphology, pore structures, and electrochemical performance. The results of the N2 physisorption measurement, X-ray diffraction, and Raman analyses reveal that the prepared NPC has bimodal pore structures and pseudo-graphite structures with nitrogen functionality. The NPC-based electrode exhibits a gravimetric capacitance of 153 F g-1 at 1 A g-1, a rate capability of 73.2 % at 10 A g-1, and an outstanding cycling ability of 97.85 % after 10,000 cycles at 10 A g-1. Thus, the NPC prepared in this study can be applied as electrode material for high-performance supercapacitors.
The purpose of this study is to investigate effects of White Ginseng-Ejung-tang water extract (EJ) on production of various cytokines such as interleukin (IL)-2, IL-5, IL-6, IL-10, IL-12p70, macrophage inflammatory protein (MIP)-2, vascular endothelial growth factor (VEGF), keratinocyte-derived chemokine(KC), tumor necrosis factor (TNF)-${\alpha}$, and granulocyte macrophage colony-stimulating factor (GM-CSF) in RAW 264.7 mouse macrophages stimulated by lipopolysaccharide (LPS). Levels of cytokines were measured by High-throughput multiplex bead array cytokine assay based on xMAP (multi-analyte profiling beads) technology. EJ significantly decreased levels of IL-2, IL-12p70, IL-5, MIP-2 for 24 h incubation at the concentrations of 25, 50, and 100 ${\mu}g/mL$ in LPS-induced RAW 264.7 (P < 0.05). EJ significantly decreased levels of IL-6 at the concentrations of 50 and 100 ${\mu}g/mL$ (P < 0.05). EJ significantly decreased levels of IL-10 and VEGF at the concentrations of 25 and 100 ${\mu}g/mL$ (P < 0.05). EJ significantly decreased levels of KC at the concentrations of 100 ${\mu}g/mL$ (P < 0.05). EJ did not show any significant effect on TNF-${\alpha}$ and GM-CSF production. These results suggest that EJ has anti-inflammtory property related with its inhibition of IL-2, IL-5, IL-6, IL-10, IL-12p70, MIP-2, VEGF, and KC production in LPS-induced macrophages.
The purpose of this study is to investigate effects of White Ginseng-Ejung-tang (EG) and Red Ginseng-Ejung-tang (ER) water extract on production of various cytokines such as interleukin (IL)-21, IL-25, IL-$28{\beta}$, erythropoietin (EPO), Exodus-2, monocyte chemotactic protein (MCP)-5, macrophage inflammatory protein (MIP)-$3{\alpha}$, MIP-$3{\beta}$, Fractalkine, and TARC in RAW 264.7 mouse macrophages stimulated by lipopolysaccharide (LPS). Levels of cytokines were measured by High-throughput multiplex bead array cytokine assay based on xMAP (multi-analyte profiling beads) technology. ER significantly decreased levels of IL-21, IL-25, IL-$28{\beta}$, EPO, Exodus-2, MCP-5, MIP-$3{\alpha}$, MIP-$3{\beta}$, TARC, and fractalkine for 24 h incubation at the oncentrations of 25 and 100 ${\mu}g/mL$ in LPS-induced RAW 264.7 (P < 0.05). But EG did not show any significant effect. These results suggest that ER has anti-inflammtory property related with its inhibition on the production of IL-21, IL-25, IL-$28{\beta}$, and chemokines such as EPO, MCP-5, MIP-$3{\alpha}$, MIP-$3{\beta}$, Fractalkine, Exodus-2, and TARC in LPS-induced macrophages.
Sang-Min Kim;Dong Yeol Kim;Jiwon Park;Young-Ah Moon;Inn-Oc Han
BMB Reports
/
제57권2호
/
pp.92-97
/
2024
Elevated blood glucose is associated with an increased risk of atherosclerosis. Data from the current study showed that glucosamine (GlcN), a normal glucose metabolite of the hexosamine biosynthetic pathway (HBP), promoted lipid accumulation in RAW264.7 macrophage cells. Oleic acid- and lipopolysaccharide (LPS)-induced lipid accumulation was further enhanced by GlcN in RAW264.7 cells, although there was no a significant change in the rate of fatty acid uptake. GlcN increased acetyl CoA carboxylase (ACC), fatty acid synthase (FAS), scavenger receptor class A, liver X receptor, and sterol regulatory element-binding protein-1c (SREBP-1c) mRNA expression, and; conversely, suppressed ATP-binding cassette transporter A1 (ABCA-1) and ABCG-1 expression. Additionally, GlcN promoted O-GlcNAcylation of nuclear SREBP-1 but did not affect its DNA binding activity. GlcN stimulated phosphorylation of mammalian target of rapamycin (mTOR) and S6 kinase. Rapamycin, a mTOR-specific inhibitor, suppressed GlcN-induced lipid accumulation in RAW264.7 cells. The GlcN-mediated increase in ACC and FAS mRNA was suppressed, while the decrease in ABCA-1 and ABCG-1 by GlcN was not significantly altered by rapamycin. Together, our results highlight the importance of the mTOR signaling pathway in GlcN-induced macrophage lipid accumulation and further support a potential link between mTOR and HBP signaling in lipogenesis.
The surface $O_3,\;CO,\;NO_x,\;and\;SO_2$ were measured at Gosan in Jeju Island from May 2004 to April 2005. Over this period, the mean concentrations $({\pm}s.d.)$ of each gas was 40.06 $({\pm}16.01)$ ppbv for $O_3,\;264.92({\pm}115.73)ppbv\;for\;CO,\;1.98({\pm}2.73)ppbv\;for\;SO)_2,\;and\;4.64 ({\pm}3.24) ppbv\;for\;NO_x$. The monthly variations and the diurnal variations of these gases show that the Gosan site is situated in a relatively clean region. However, there were episodic simultaneous peaks in CO and $SO_2$, especially in winter and early spring. Using cluster analysis with air mass back- ward trajectory analysis, we suggest that these episodes are due to the influence of transportation of polluted air mass from polluted regions. In the cluster, which was under the dominant influence of clean maritime air mass, low levels of $O_3,\;CO,\;and\;SO_2$ were observed. The levels of these species were elevated in the other two clusters which had the air mass influenced by polluted continental regions. In addition, ratios of the chemical species such as $CO/NO_x,\;SO_2/NO_x,\;and\;CO/SO_2$ revealed the somewhat different characteristics of emission sources influencing each cluster. The differences in concentration of trace gases among clusters with different origin and transport pathways imply that Gosan is under the effect of pollution transported from other regions.
The larvae of Mytilus coruscus were grown at the room temperature of approximately 15.1C under several different sulture conditions, i.e., salinity, population of the larvae, density and kind of food organisms, etc. (1) The egg of Mytilus coruscus obtained in the laboratory measured about 73.0${\mu}$ in diameter. The embryos gradually developed into larvae up to 179.0${\mu}$ shell length with the shell height of 135.9${\mu}$ even in the absence of the algal food. Beyond this size, however, the growth of larvae was considerably retarded, indicating that the better growth could be expected if the food began to be fed four days after spawning. (2) The larvae began settling upon reaching 281.4${\mu}$ to 310.9${\mu}$ in shell length or 264.3${\mu}$ to 301.9${\mu}$ in shell height. When the shell length reaches 322.6${\mu}$ to 337.1${\mu}$, the shell height also reaches about the same, i.e., 321.5${\mu}$ to 346.2${\mu}$. (3) Daily rate of food consumption was determined by the size of the larvae and the species of the algal food. Regardless of the species of food given, the rage of food consumption remained almost the same until the larva reached the straight-hinge stage, and marked variations were found as the larvae grew larger. Daily rate of food consumption was shown as follow; Chaetoceros calcitrans : Y=2.99167e$\^$0.000018243x$\^$2// Cyclotella nana : Y=3.00324e$\^$0.000015481x$\^$2// Monochrysis lutheri : Y=3.000056e$\^$0.000014485$\^$2// (4) Suitable amount of the food to be given was about five times of the consumed food by Mytilus coruscus. (5) When the numbers of the larvae was higher than ten per milliliter, the growth was significantly retarded. (6) Monochrysis lutheri and Cyclotella nana were much better than Chaetoceros calcitrans as the food of Mytilus coruscus, and even the same food organism showed some difference with the age of the organism. (7) Sea water of higher salinity showed the better result in the growth of the larvae and the water with the specific gravity of 1.020 or below was dangerous for the larvae. (8) The mean growth of the larvae of Mytilus coruscus under lavorable condition was shown as follows: shell length 121.8${\mu}$ to 179.0${\mu}$ : Y=119.18+7.42X 196.7${\mu}$ to 322.6${\mu}$ : Y=203.144+7.687X 322.6${\mu}$ to 985.1${\mu}$ : Y=302.5978+11.8356X shell height 86.3${\mu}$ to 135.9${\mu}$ : Y=86.22+6.40X 158.1${\mu}$ to 321.5${\mu}$ : Y=162.998+10.027X 321.5${\mu}$ to 1,215.4${\mu}$ : Y=309.3701+16.258X Relationships between the shell length and shell height were shown as follows: shell length 121.8${\mu}$ to 179.0 : Y=0.83726X-15.79165 196.7${\mu}$ to 322.6 : Y=1.29909X-100.58610 322.6${\mu}$ to 985.1${\mu}$ : Y=1.3536X-101.6806
$LiNi_{0.5}Mn_{0.3}Co_{0.2}O_2$의 리튬이온 이차전지 양극 물질로의 특성을 연구하기 위해서 단순 연소합성법을 이용하여 합성했다. 합성된 물질의 구조적 특징을 분석하기 위하여 X-선 회절분석(XRD)과 주사전자현미경 (FE-SEM)을 측정하였다. X-선 회절분석을 통하여 합성된 $LiNi_{0.5}Mn_{0.3}Co_{0.2}O_2$시료가 육방정계 층상구조가 형성된 것을 확인하였다. FE-SEM을 통해 측정한 결과 $LiNi_{0.5}Mn_{0.3}Co_{0.2}O_2$ 입자는 일정한 형태를 가지지 않았으며 크기는 대략 100~300 nm의 크기임을 확인할 수 있었다. 그리고 전기화학적 특성을 측정하기 위하여 충 방전 용량 측정과 CV(Cyclic Voltammetry)를 측정하였다. 2.8 V에서 4.3 V까지 충 방전 용량을 측정한 결과 ~162 mAh/g의 초기 방전 용량을 가졌다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.