• 제목/요약/키워드: x-y table

검색결과 326건 처리시간 0.025초

상품라인별 가격결정이 적재효율 및 물류비에 미치는 영향에 관한 연구 (Study on the Effect of Product Line Pricing on Loading Efficiency and Logistics Cost)

  • 정성태;윤남수;한규철
    • 유통과학연구
    • /
    • 제12권8호
    • /
    • pp.55-69
    • /
    • 2014
  • Purpose - Despite the importance of price, many companies do not implement pricing policies smoothly, because typical price management strategies insufficiently consider logistics efficiency and an increase in logistics costs due to logistics waste. This study attempts to examine the effect of product line pricing, which corresponds to product mix pricing, on logistics efficiency in the case of manufacturer A, and analyzes how logistics performance changes in response to these variables. Research design, data, and methodology - This study, based on the case of manufacturer A, involved research through understanding the current status, analyses, and then proposing improvement measures. Among all the products of manufacturer A, product group B was selected as the research object, and its distribution channel and line pricing were examined. As a result of simulation, for products with low loading efficiency, improvement measures such as changing the number of bags in the box were suggested, and a quantitative analysis was conducted on how these measures influence logistics costs. The TOPS program was used for the Pallet loading efficiency simulation tool in this study. To prevent products from protruding out of the pallet, the maximum measurement was set as 0.0mm, and loading efficiency was based on the pallet area, and not volume. In other words, its size (length x width) was focused upon, following the purpose of this study and, then, the results were obtained. Results - As a result of the loading efficiency simulation, when the number of bags in the box was changed for 36 products with low average loading efficiency of 73.7%, as shown in

    , loading efficiency improved to 89.9%. Further, from calculating logistics cost based on the cost calculation standard of manufacturer A, the amount of annual logistics cost reduction amounted to 101,458,084 KRW. Given that the sum of the logistics cost of the product group B of manufacturing enterprises A is 400,340,850 KRW, it can be reduced by 25%, to 298,882,766 KRW. Although many methods improve loading efficiency, this study proved that logistics cost could be reduced by changing the number of bags within boxes. If this measure is applied to other items, visible logistics cost reduction effects will be realized through improvements in loading efficiency. Conclusions - Future pricing policies should consider their correlation with quality, loading efficiency, product specifications, and logistics standardization to prevent logistics waste, enabling management to improve earnings for companies. Thus, when companies decide pricing policies for new products, the aspects of merchandising and marketing should take priority; however, the aspect of logistics also needs to be considered as significant. Measures revealed by the study results are not only the responsibilities of manufacturing enterprises. Pricing policy agreements between manufacturing enterprises and distribution companies, and logistics factors related to price determination should be considered; further, governments should also support them for their collaborations. This will enable consumers to purchase quality products with low prices.

  • 주요수종(主要樹種)의 방사선감수성(放射線感受性) 및 변이(變異)에 관(關)한 연구(硏究) (Studies on the Radiosensitivity and Mutation Induction of Tree Species in Korea)

    • 김지문
      • 한국산림과학회지
      • /
      • 제25권1호
      • /
      • pp.73-79
      • /
      • 1975
    • 나자식물(裸子植物) 4과(科), 12종(種)과 피자식물(被子植物) 12과(科), 18종(種), 6품종(品種), 3계통(系統)의 한국산(韓國産) 경제수종(經濟樹種) 및 관상수종(觀賞樹種)의 종자(種子), 삽목(揷木), 접수(接穗) 및 생체(生體)에 X선(線) 또는 ${\gamma}$선(線)을 급조사(急照射), 반급조사(半急照射) 또는 완조사(緩照射)를 실시하여 수종별(樹種別) 방사선감수성(放射線感受性) 및 변이(變異)의 출현(出現)을 조사(調査)하였다. 공시수종(供試樹種)의 대부분(大部分)은 높은 방사선감수성(放射線感受性)을 보였으며 침엽수(針葉樹)는 LD-50이 1.2 kR~13.2 kR 범위(範圍)로 평균(平均) 5.4 kR의 심(甚)히 높은 감수성(感受性)을 보였고, 활엽수(濶葉樹)는 LD-50이 7.0 kR-18.5 kR범위(範圍)로 평균(平均) 12.7 kR이였으며 수종간(樹種間)의 비교방사선감수성(比較放射線感受性)을 LD-50을 기준으로 분류(分類)하였다(Table 2). 출현(出現)하는 변이중(變異中)에는 반문엽(斑紋葉)이 가장 많았고, 백자(白子), 엽록소결핍(葉綠素缺乏), 기형엽(奇形葉), 기형과(奇形果)등의 출현(出現) 및 약밤나무의 대형엽(大形葉) 아조변이(芽條變異)와 측백나무의 황색엽(黃色葉) 아조변이(芽條變異)가 유기(誘起)되었다.

    • PDF

    Trienzyme과 Lactobacillus casei를 이용한 국내 수산 자원의 엽산 분석 및 유효성 검증 (Validation of a trienzyme-Lactobacillus casei method for folate analysis in fishery resources consumed in the Korean diet)

    • 정보미;남기호;김연계;천지연
      • 한국식품과학회지
      • /
      • 제52권6호
      • /
      • pp.580-586
      • /
      • 2020
    • 본 연구에서는 trienzyme 추출 및 L. casei 분석법을 국내 다양한 수산 자원의 엽산 분석에 적용하기 위해 분석수행지표(직선성, 민감성, 정확성, 정밀성)를 분석 평가하여 분석법의 유효성을 검증하였다. 분석법의 검출한계(LOD)와 정량한계(LOQ)는 각각 0.562 ㎍/100 g와 1.057 ㎍/100 g으로 엽산 함량이 낮은 식품에 적용할 수 있는 분석법으로 나타났다. 시료 중 엽산 함량에 대한 L. casei 생육 관계는 다항식 모델(y=4-1.132/((1+X/0.0502)1.02)+1.26)로 분석한 결과 R2=1.0000을 나타내는 우수한 상관성을 얻었다. 또한, 분석법의 정확성과 정밀성이 우수한 수준임을 확인할 수 있었으며, 수산 자원 6개 군별에 따른 엽산 회수율 분석에서도 약 87-108%의 신뢰도가 확보된 회수율을 나타냄을 확인하였다. 본 연구에서 분석한 수산자원 20종의 엽산 함량분석 및 검증 데이터는 국내 수산 자원에 대한 신뢰도 있는 데이터베이스 구축 자료로 활용될 수 있을 것으로 판단되며, 한국은 삼면이 바다로 인접된 지리적 특성으로 인하여 일상 식단에서 다양한 수산 자원이 자주 이용되고 있는 바 trienzyme-L. casei 분석법을 향후 수산 자원의 엽산 함량 분석에 확대 적용하여 국가수준의 영양성분데이터베이스 구축에 기여할 수 있을 것이라 사료된다.

    온보드 영상장치(On-Board Imager) 및 콘빔CT(CBCT)를 이용한 환자 자세 검증의 유용성에 대한 연구 (A Study on the Availability of the On-Board Imager(OBI) and Cone-Beam CT(CBCT) in the Verification of Patient Set-up)

    • 박진호;박성호;박석원
      • Radiation Oncology Journal
      • /
      • 제26권2호
      • /
      • pp.118-125
      • /
      • 2008
    • 목적: 온보드 영상장치(On-Board Imager, OBI) 및 콘빔CT(Cone Beam Computerized Tomography, CBCT)를 이용하면 치료실에 위치한 환자의 자세 및 위치와 모의치료 시점의 환자의 자세 및 위치를 비교할 수 있다. 온라인 영상유도방사선치료(on-line Image Guided Radiation Therapy, on-line IGRT)에서는 이러한 정보를 이용하여 방사선 치료 직전에 환자의 위치를 확인하고 보정한다. 이때 모의치료 시 획득한 영상과 치료실에서 실시간 얻은 kV X선 영상 또는 콘빔CT 영상을 이용하여 2차원/2차원 맞춤(2D/2D Match) 또는 3차원/3차원 맞춤(3D/3D Match)의 이미지 퓨젼 프로그램을 사용하여 그 편차를 산출한다. 이 과정에서 주어지는 편차가 환자 자세에 대한 오차를 정확히 반영하고 있는지에 대해 알아보고자 한다. 대상 및 방법: 신체 내부 구조가 모사된 팬톰(The $RANDO^{(R)}$ Phantom, Alderson Research Laboratories Inc., Stamford, CT, USA)을 사용하여 실제 방사선 치료와 동일한 과정을 따라 모의치료 및 치료계획을 시행한 후 치료 테이블 위에 팬톰을 셋업한다. 그리고 모의치료 시 표시된 팬톰의 표면 지점에 치료실의 레이저에 일치시킨다. 이때, CT 모의치료실과 가속기가 있는 치료실의 벽면 고정 레이저에 대한 정렬의 일치만 확인하면, 치료테이블에 놓여진 팬톰의 위치는 모의치료 시 위치와 정확히 일치한다. 실제로는 팬톰 표면에 나타나는 레이저 선의 두께 정도되는 오차를 무시한다면, 두 시점에서 팬톰의 위치가 정확히 같다고 말할 수 있다. 정확히 위치가 재현되었다고 가정되는 팬톰에 대해 평행이동 또는 회전이동의 변화를 만들어 준 후, 위치가 옮겨지고 틀어진 팬톰에 대해 온보드 영상장치로부터 kV X선 영상을 그리고 콘빔CT로부터 CT 영상을 얻는다. kV X선 영상과 모의치료 시 획득한 CT영상을 이용하여 OBI 프로그램에서 제공되는 2차원/2차원 맞춤의 결과를 얻는다. 그리고 콘빔CT 영상과 모의치료 시 획득한 CT영상을 가지고 이미지 퓨젼 과정을 거쳐 3차원/3차원 맞춤의 결과를 얻는다. 이렇게 얻은 2차원/2차원 맞춤 및 3차원/3차원 맞춤의 결과와 처음에 팬톰에 인위적으로 만들어준 위치 변화를 비교한다. 결과: 온보드 영상장치로 획득한 kV X선 영상과 모의치료 시 영상을 비교하는 2차원/2차원 맞춤에서는 팬톰의 위치에 회전이동만 존재한다고 가정했을 때에는 평균 $0.06^{\circ}$의 오차 내에서 모의치료 시 팬톰의 위치에 대한 편차를 찾을 수 있었다. 또한 평행이동만 존재한다고 가정했을 때에는 편차 벡터의 크기가 평균 1.8 mm였다. 그리고 회전이동과 평행이동이 동시에 존재하는 일반적인 경우에는 편차 벡터의 크기는 평균 2.1 mm, 테이블 회전 방향으로 평균 $0.3^{\circ}$의 오차 내에서 모의치료 시 팬톰의 위치를 찾을 수 있었다. 콘빔CT로 획득한 영상을 이용하는 3차원/3차원 맞춤의 과정에서 팬톰의 위치가 회전이동만 존재할 때에는 평균 $0.03^{\circ}$의 오차 내에서, 평행이동만 있는 경우는 편차 벡터의 크기의 평균이 0.16 mm 내에서, 틀어지고 이동된 팬톰의 위치를 찾을 수 있었다. 그리고 회전이동과 평행이동이 동시에 존재하는 일반적인 경우에는 편차 벡터의 크기는 1.5 mm, 테이블 회전 방향으로 평균 $0^{\circ}$의 오차 내에서, 모의치료 시 팬톰의 위치와 맞출 수 있었다. 결론: 온보드 영상장치와 콘빔CT를 이용한 영상유도방사선치료(on-line IGRT)에서 모의치료 시 팬톰의 위치는 가속기의 치료테이블 위에서 매우 정확히 재현되어졌다. 온보드 영상장치는 kV X선 영상을 이용하여 간단하게 위치의 검증과 보정을 할 수 있었고, 콘빔CT를 이용하는 경우에는 2차원적인 정면 또는 측면 영상이 아니라, 3차원 영상을 비교함으로서 더욱 정확한 위치보정이 가능하였다.

    3차원 레이저 스캐너를 이용한 한국인 영구치의 순, 협측 치관 굴곡도에 관한 연구 (A Study on the labial & buccal surface contour in Korean permanent teeth using three-dimensional laser scanning)

    • 고상덕;차경석
      • 대한치과교정학회지
      • /
      • 제32권4호
      • /
      • pp.275-291
      • /
      • 2002
    • 스트레이트 와이어 장치의 효율적 운영을 위해서 제시되어야 할 여러 사항 중 치관의 굴곡도에 대한 연구는 국내, 외에서 매우 미흡하다. 이에 본 연구는 한국인 영구치의 순, 협측 임상치관 굴곡도를 조사하기 위해 시행되었다 이를 위해 정상적인 해부학적 구조를 갖고있는 구강 석고모형 36쌍을 대상으로 3차원 레이저 스캐닝 하였다. Andrews plane 과 Facial axis of clinical crown(FACC)을 각각 수평 , 수직 기준선으로 설정하고, 이들로부터 상, 하 방향과 좌, 우 방향으로 각각 1m간격으로 2개 혹은 3개씩의 선을 그었다. 이들 선이 교차하는 점들에 대한 3차원적 점 좌표를 만들어 놓고 36쌍 구강 석고모형의 각각 좌표점들의 평균을 구하였다 3차원 좌표 점(x,y,z)을 이용해 곡면 방정식을 만들어 각 치아의 곡률을 구하였고, 가로, 세로 각 방향의 2차원 곡선으로 단순화시킨 곡선에서의 곡률을 구하여 치아 부위마다의 곡률 변화를 계측하여 다음과 같은 결론을 얻었다. 1. 한국인 영구치 치관의 순, 협면 굴곡도의 기초자료를 얻었다. 2. 남, 녀 간에 치관 굴곡도 차이는 없었다. 3. 개개 치아의 치관 굴곡에 대한 특성 1) 상악 중절치에서 치은쪽과 절단면쪽의 곡률 차이가 다른 치아에 비해 심하였으며, 치은쪽이 더욱 심한 곡률을 보였다. 2) 상악 견치의 치관 굴곡도는 근심-절단면쪽의 굴곡이 다른면에 비해 더 심하였다. 3) 상악 제 1소구치에서는 근심-교합면쪽과 원심-치은쪽에서의 굴곡이 더 심하여 치관 표면의 굴곡이 대각선 방향으로 서로 뒤틀린 반면, 상악 제 2소구치에서는 근심 끝과 원심 끝의 치관 표면 굴곡이 비슷하여 서로 평행하게 나타났다. 4) 하악 중절치와 하악 측절치의 치관 굴곡도에는 유의한 차이가 없었다. 5) 하악 제 2소구치의 교합면-치은쪽으로의 굴곡이 하악 제 1소구치나 상악 제 2소구치에 비하여 더 둥근 것으로 나타났다. 이상의 결과로 볼 때, 하악 중절치와 측절치는 브라켓 베이스를 같게 해도 무방하다. 그러나 상악 제 1소구치와 제 2소구치, 그리고, 하악 제 1소구치와 제 2소구치는 치관 굴곡도에 차이가 있으므로 브라켓 제작시 베이스의 굴곡을 다르게 하여야 한다.

    토양수분함량 예측 및 계획관개 모의 모형 개발에 관한 연구(I) (A Study on the Development of a Simulation Model for Predicting Soil Moisture Content and Scheduling Irrigation)

    • 김철회;고재군
      • 한국농공학회지
      • /
      • 제19권1호
      • /
      • pp.4279-4295
      • /
      • 1977
    • Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka+Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

    • PDF

    농촌의 전력및 전기기기의 이용특성분석 (Analysis of the Utilization Characteristics of Electrical Power and Equipments on the Farms)

    • 박승우;류한열
      • 한국농공학회지
      • /
      • 제17권4호
      • /
      • pp.3943-3955
      • /
      • 1975
    • The purposes of this study are to evaluate the utilization characteristics of electrical power consumption, to grasp the present trends in the use of electrical equipments, to estimate the demand factor and load factor being held, and to evaluate the efficiency of electical uses for the recently electrified farms cultivating paddy rice. For the purposes, 109 sample farms located in eleven villiages electrified in six different years from 1968 to 1973, were chosen at random and investigated on 35 items concerning to electrical uses and wiring systems. The survey was carried out in 1975, in the vinicity of Suweon city. The results are summarized as follows: i) The average annual power consumption on sample farms is considered to be low, being 242.9 Kwh. in 1974, and varied according to the different electrified year and size of cultivated land, respectively. It has significant positive correlation to the area of farm, too. ii) Between the number of year of electrical uses and the power consumption, there is very significant positive correlation, which could be expressed as Y=43.041+16.108 X, where X represents the number of years of electrical uses. The annual increment of power consumption is much greater at the beginning of the electrification than that at the later years, its average being approximately 20 percent. However, it is recommended that any estimation of long-term increments should be carefully investigated. iii) The monthly power consumption varies considerably throughout a year, in which the heaviest farm load occurs in November. Observing the seasonal variation of consumption, the winter-time is the heaviest season while the summer is the lowest. The result implies house lighting is chief contribution to the present electrical consumption on the farms. Comparing the variation of monthly consumption ratios between the sample farms and industries, the electrical uses on the farms are independant of the industrial uses, and further, the agricultural uses are of inverse pattern to the farms from the results that there is negative correlationship between them, iv) The number of electrical equipments used on the farms are occupied chiefly by lighting sources. Next to the lighting sources, household appliances of small quantity and some motors are used. The mean electrical quantity is about 1, 127.4 watt, which corresponds to about 37.6 per cent to the contracted quantity. The composition of quantity is chiefly occupied by the electrical motor of about 1.5 hp., single-phased. The number of the annual utilization hours of each equipment is tabulated in Table IV-5. In contradiction to the high utilization of lighting sources and small household appliances, the motor is poorly used for approximately 22 hours in a year. v) More than 55 per cent of farms want to purchase new electrical equipments such as small household appliances and electrical motors in their number. The impulse of purchasing such items is stimulated by the contacts to the mass media and their knowledge on such equipments. Consequently, the increase of electrical uses could be prompted by such trials as education and demonstration. vi) The demand and load factors on the farms vary considerably according to the greater variation of the power consumption, daily or monthly. The daily demand factor is 22.4 per cent and load factor 18.6 per cent, while the annual demand factor is 1.3 per cent and load factor 70 per cent approximately. Therefore, the low efficiency of construction cost requires re-evaluation of the present contracted quantity of 3 Kw. or increase of electrical uses. vii) The electrical energy on the farms devoted chiefly to lighten the farm residences does not contribute to the farm incomes. Consequently, the cost of electrical consumption presses considerably upon the farm economy. Therefore, there is great need to build up the electrical uses on the farms through the development of new works and techinques to utilize any electrical equipments on the production of farm products. Further more, such the development should be related to increase the actual income of the farm consumers.

    • PDF

    국가건강검진의 방사선검사 이용량 및 피폭선량 추정 (Estimated Exposure Dose and Usage of Radiological Examination of the National Health Screening)

    • 길종원;박종혁;박민희;박찬영;김소영;신동욱;김원동
      • Journal of Radiation Protection and Research
      • /
      • 제39권3호
      • /
      • pp.142-149
      • /
      • 2014
    • 한국은 국가건강검진을 시행하여 국민건강증진에 크게 기여하고 있으며 그 수검률 또한 증가하고 있다. 본 연구는 수검률 증가에 따른 방사선검사의 증가가 예상되어 그 이용 빈도(이용량)와 피폭선량을 파악하고자 한다. 본 연구는 2011년 국민건강보험공단 건강검진 분석 자료에서 방사선검사를 분리하여 이용량을 파악하고, UNSCEAR 2008년 보고서의 수록되어 있는 검사별 선량을 적용하여 국가건강검진에서 방사선검사로 인한 피폭선량을 추정한다. 주요 분석결과 2011년 국가건강검진 수검자 1인당 평균 피폭선량은 0.57 mSv로 추정되었고, 최대 11.081 mSv, 최소 0.02 mSv로 추정되었다. 방사선검사의 이용 빈도와 피폭선량은 각각 총 16,005,914건, 6,311.76 person-Sv로, 이중 이용량은 흉부 X선검사가 1,070,569 (69.17%)건으로 가장 높았고, 피폭선량은 위장조영검사가 5,217.94 (82.67%) person-Sv로 가장 높았다. 성 연령별 결과 39세 이하를 제외한 전 연령대에서 여성의 수검비율과 피폭선량이 높았고, 특히 50-54세 여성이 1,674,787 (10.5%)건, 701.59 (11.1%) person-Sv로 가장 높았다. 검사별 선량에서 위장조영검사가 전체 82.67%를 차지하는 만큼 의료상(목적) 반드시 시행하는 경우를 제외하고는 위장내시경검사를 선택하여 수검 받도록 정책적으로 장려하고 외국의 사례와 같이 경제성과 실효성 평가에 따라 폐지된다면 국가건강검진에의 방사선피폭은 현저히 줄어들 것으로 예상한다.

    골밀도 측정의 정확한 정도관리방법 -이중 에너지 방사선 흡수법을 중심으로- (Accurate Quality Control Method of Bone Mineral Density Measurement -Focus on Dual Energy X-ray Absorptiometry-)

    • 김호성;동경래;류영환
      • 대한방사선기술학회지:방사선기술과학
      • /
      • 제32권4호
      • /
      • pp.361-370
      • /
      • 2009
    • 골밀도의 질 관리는 검사를 시행하는 방사선사들의 책임과 의무이다. 하지만 질 관리의 이해 부족과 방법의 무지로 인한 잘못된 결과는 환자에게 치명적인 오류를 범할 수 있다. 따라서 이 논문은 올바른 질 관리의 이해와 방법을 기술하여 검사자 및 환자, 의뢰의사에게 골밀도 검사의 신뢰성을 확보하는 것을 목적으로 한다. 이중 에너지 엑스선 골밀도 기기(dual energy X-ray absorptiometry, DXA)는 골밀도 측정은 정확도와 정밀도가 우수하여야 작은 골량의 변화에도 진정한 생물학적 변화를 알 수 있다. 따라서 정확도와 정밀도를 높이기 위한 수단으로 장비 및 검사자의 올바른 질 관리가 지속적으로 이루어져야 한다. 올바른 장비관리방법은 매일 아침 장비 보정 질 관리 후 제조사에서 권고하는 팬텀을 이용하여 10~25회 측정하여 평균값을 구하고 이를 기준으로 허용 범위(${\pm}1.5%$)를 지정한다. 팬텀의 측정은 검사가 있는 날에 매일 측정하거나 일주일에 3회 이상 측정하여 실제 골밀도의 값의 변화 유무를 확인하여야 한다. 또한 측정된 팬텀의 골밀도수치를 기록 한 Shewart control chart를 Rule에 따라 평가한다. 이러한 관리는 장비의 설치 및 이동 시에 반드시 행해져야 한다. 검사자 관리방법은 정밀도 측정으로 평가하는데 정밀도는 재검사하였을 때에 실제 생물학적 변화 없이 수치상의 결과 값을 똑같이 재현될 수 있는지 알아보는 것이다. 측정 방법은 골밀도 검사를 진행하면서 환자를 두번씩 30번 측정하는 방법과 세번씩 15번 측정하는 방법이 있다. 측정에서 중요한 것은 한 번 검사 후 두번째나 세번째 검사에서도 반드시 검사 테이블에서 내려왔다 다시 올라가서 검사를 해야 한다. 측정된 골밀도수치로 정밀오차를 산출하고 95% 신뢰수준으로 정밀오차에 2.77을 곱하여 최소한의 생물학적 골밀도 변화를 산출한다. 산출된 값을 최소한의 의미있는 변화라고 표현하며 이 값을 넘어섰을 경우가 진정한 생물학적 변화구간이라고 할 수 있다. 검사자의 정도관리는 처음 검사를 시작하는 경우와 장비의 이동 및 교체 시에 반드시 행해져야하며 지속적으로 이루어져야 한다. 골밀도 검사를 시행하는 방사선사의 올바른 질 관리의 수행은 장비의 수명 연장과 정확한 결과의 산출로 이어져 검사의 신뢰성 확보와 환자 및 방사선사에게 부적절한 검사로 인한 방사능 노출의 최소화에 도움을 줄 것이다.

    • PDF

    재배시기 이동에 의한 수도의 생태변이에 관한 연구 -II. 재배시기 이동에 의한 수도출수기의 년차간변이와 그 조기예측- (Studies on the ecological variations of rice plant under the different seasonal cultures -II. A study on the year variations and prediction of heading dates of paddy rice under the different seasonal cultures-)

    • 최현옥
      • 한국작물학회지
      • /
      • 제3권
      • /
      • pp.41-48
      • /
      • 1965
    • 수도출수기의 년차간변이정도를 알고 아울러 출수기의 조기예측방법을 연구검토코자 1959년부터 1964년까지 6개년간에 걸쳐 관산외 5개품종을 공시하여 작물시험장 답작과(수원)에서 실시한 조기ㆍ보통기 및 만기 재배시험성적과 1953년부터 1964년까지 12갠년간에 걸쳐 각도에서 실시한 수도풍흉고조시험성적으로부터 품종별로 매년의 출수기를 조사정리하고, 아울러 당해연도 해지방의 기상통계를 조사정리하여 출수기의 변이와 기상요인과의 관계를 연구검토하여 출수기의 조기예측방법을 모색코자 시도한 것으로서 그 결과는 다음과 같다. 1. 수도출수기의 년차간변이 : 이것은 조기재배에 있어서는 14∼21일로서 대단히 크며, 보통기재배에서는 7∼14일 정도이고, 만기재배에 있어서는 1∼7일 정도로서 어느 재배시기보다 적으며, 그정도는 품종ㆍ재배시기 및 지역 등에 따라 차이기 있다. 2. 수도출수기의 조기예측 : 조기재배에 있어서는 공시전품종 파종후 31일부터 40일간의 적산온도와 출수일수간에 가장 높은 부의 상관을 가지고 있으며, 따라서 이 기간의 적산온도 및 회귀 직선식(Y=a+bX)의 산출에 의하여 실용적출수기를 조기에 예측할 수 있다고 생각된다. 그러나 만생종에 대하여 앞으로 더욱 검토하여야 할 것이다. 보통기재배에 있어서는 수원에서의 6개년간 성적에 의하면 적산온도와 출수일수간에 유의적상관을 인정할 수 없었고, 각도에서의 12개년간의 결과에 의하면 파종후 70일간의 적산온도와 출수일수간에 품종에 따라서는 유의적인 상관이 있는 것과 없는 것이 있으며, 지역저긴 차이는 인정할 수 없었다. 등은 조파의 경우에 높은 수량을 보이는 품종들이었다. 4. 품종별 수량이 파종기에 따라서 변동하는 경향을 보면 Table 4와 같이 대체로 조생종에 있어서는 파종기 연장에 따라 수량 감소의 정도가 낮고 도리어 조파보다 만파의 경우에 좋은 성적을 나타 내었으나 중생종, 만생종일수록 파종기 연장에 의한 수량 감소의 정도가 높았다. 옥면과 같은 극만생종 품종은 조반의 경우라도 상해 등으로 본실험지의 기후조건 하에서는 경제적 재배가 곤란하다고 믿는다. 따라서 조생종에 있어서는 5월 이후의 만파의 경우에, 중, 만생종에 있어서는 4월보다 도리어 5월 파종의 경우에 좋은 성적을 나타내는 경향이 있으나 품종별 파종 최적기 등의 결정문제는 앞으로 해결되어야 할 한 과제가 될 수 있을 것이라 하겠다.의 일수가 길면 신고비가 높았다. 있다. 인텔리전스(intelligence)에 따라 분류했을 경우, 모던, 엘레강스, 클래식, 소피스티케이트 등은 엘리트적 성향으로 캐주얼, 내추럴은 대중적 성향으로 분류된다. cluster에서 구현하였다. 그 결과 특정 노드의 성능이 다른 것에 비해 현저하게 떨어질 때 전체적인 알고리즘의 수렴 속도가 떨어지는 것을 상당히 완화할 수 있음이 밝혀졌다., 2001).의 특징이라 할 수 있겠다. 대한 자부심과 국제 사회에서 차별화 할 수 있는 한국 복식 디자인에 독창성과 창조성을 표현하는 중요한 영역임을 인식할 수 있었다.와 보호인자를 재확인할 필요가 있다고 보며 본 연구의 결과는 지역민의 대장직장암 예방을 위한 영양교육 자료로서 활용될 수 있다고 본다. 관여도에 영향을

    • PDF