• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.445-449
• /
• 2008

Micrometer-sized copper (mCu) powders are weakly surface-enhanced Raman scattering (SERS) active by the excitation at 632.8 nm, but nearly ineffective as a SERS substrate at 514.5 nm excitation. The SERS activity of mCu powders at both excitation wavelengths can be increased dramatically by a simple method of the galvanic exchange reaction with AgNO3 in aqueous medium. In this work, the SERS activity of the Ag-exchanged Cu powders (mCu@Ag) has been evaluated by taking a series of Raman spectra using benzenethiol (BT) as the probe molecule. It is clearly confirmed by field emission scanning electron microscopy and X-ray diffractometry that the SERS activity of mCu@Ag powders is, in fact, highly dependent on the extent of galvanic reaction.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1033-1034
• /
• 2006

Metallic compound of ternary Al-B-C system was prepared by mechanical alloying (MA) using Al, boron and graphite powders as starting materials. MA was carried out using Spex 8000 mixer/mill for 50 hours in an argon atmosphere without process control reagent such as methyl alcohol. The MA powders obtained were heat-treated in vacuum at the temperature of 873 and 1273 K for 5 hour. Pure ternary Al-B-C compound was obtained in the chemical content of Al:B:C=55:27:18. The ternary compound obtained in this study has a new phase whose crystal structure is not identified yet.

• Archives of Pharmacal Research
• /
• v.29 no.2
• /
• pp.178-182
• /
• 2006

Four crystal forms of cephradine were isolated by recrystallization and characterized by powder X-ray diffractometry, differential scanning calorimetry, and thermogravimetric analysis. The dissolution patterns of four crystal forms of cephradine were studied in water at $37{\pm}0.5^{\circ}C$, 90 rpm for 120 min. The amount dissolved at 120 min was highest for Form 1 ($100\%$), followed by Form 3 ($98.9\%$), Form 4 ($77.83\%$), and Form 2 ($75.55\%$). After storage for two months at $0\%$ RH (silica gel, $20^{\circ}C$), $52\%$ RH (saturated solution of $Na_{2}Cr_{2}O_{7}{\cdot}2H_{2}O/20^{\circ}C$), and $95\%$ RH (saturated solution of $Na_{2}HPO_{4}/20^{\circ}C$), none of the crystal forms showed transformation.

• Journal of Integrative Natural Science
• /
• v.1 no.2
• /
• pp.84-88
• /
• 2008

The formation and thermal properties of the $BaO_2$ and $TiO_2$ mixtures were prepared by mechanical alloying method was investigated by X-ray diffractometry (XRD), scanning electron microscopy (SEM), and thermogravimetric/differential thermal analysis (TG/DTA). The rotating speed of 750 rpm shows more effects on the formation of $BaTiO_3$ single phase. The internal strain calculated using Williamson-Hall method was $4.27{\times}10^{-3}$ for the mixture milled for 300 min, the crystallite size was calculated using the Scherrer method decreased with milling time. The $BaTiO_3$ crystal improved crystallinity was formed by thermal annealing at a temperature of $600^{\circ}C$ for 1 h for the mixture milled for 300 min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.578-581
• /
• 1999

The Co-Cr-Ta films are one of the most suitable candidates for perpendicular magnetic recording media. The facing targets sputtering(FTS) system has a advantage of preparing films over a wide range of working gas pressure on plasma-free substrates. In this study, we investigated the effect underlayers on the growths layers of Co-Cr-Ta recording layers. The Co-Cr-Ta/Ti(CoCr) double layers were deposited with sputter gas pressure$(P_N, 0.3-1mTorr)$ by using FTS apparatus at temperature of$40^{\circ}C~-300^{\circ}C$, respectively. Crystallographic and magnetic characteristics were evaluated by x-ray diffractometry(XRD) and vibrating sample magnetometer(VSM), respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.46-46
• /
• 1988

Structural and magnetic properties of Co-Cr-Mo films were investigated in connection with sputtering conditions. Films were prepared using a convention RF sputtering system. X-ray diffractometry, scanning electron microscopy and transmission electron microscopy were employed to investigate structure properties. Vibrating sample magnetometry was used for coercivity and saturation magnetization measurements. Co-Cr-Mo films displayed reasonable values of perpendicular coercivity and saturation magnetization for perpendicular recording media and showed good perpendicular orientation of the hcp c-axis to the film surface. Perpendicular coercivity was strongly dependent upon substrate technique showed better c-axis orientation than hose using the stationary substrate. Co-Cr-Mo films of 2.9 at. % Mo content showed maximum perpendicular coercivity and saturation magnetization. The films deposited at lower Ar pressure showed good magnetic properties. There was no explicit relationship between the columnar structure and c-axis orientation. Co-Cr-Mo films was found to have suitable structural and magnetic properties for perpendicular recording media.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.141-143
• /
• 2007

Nanotubes and microtubes of ferroelectric lead zirconate titanate (PZT) were synthesized by means of a simple and convenient process called a template-wetting process. Nanoporous alumina and macroporous Si were used as template materials to fabricate the corresponding tubes. For the improvement of the wetting properties of the wetting solution, the PZT solution was mixed with a polymer. The polymer was removed completely during annealing. The grain growth processes of the PZT nanotubes during baking and furnace annealing were examined by means of field emission electron microscope (FE-SEM) and X-ray diffractometry (XRD).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.492-495
• /
• 2000

In order to develop an ultra-thin CoCr perpendicular magnetic recording layer, we prepared CoCrTa/Ti double layer for perpendicular magnetic recording media by new facing targets sputtering system, Crystallgraphics and magnetic characteristics of CoCrTa on underlayer substrate temperature have been investigated. Crystallgraphic and magnetic characteristic of thin films were evaluated by X-ray diffractometry(XRD), vibrating sample magnetometer(VSM) and atomic force microscopy(AFM). The coercivity and anisotropy field was increased by increasing under layer substrate temperature, c-axis orientation of CoCrTa magnetic recording layer was improved 8$^{\circ}$ to 5.6$^{\circ}$when under layer substrate temperature was 250[$^{\circ}C$]. Also, through annealing effect for CoCrTa/Ti double layer, it was certain that crystallgraphics and magnetic characteristics was improved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.309-312
• /
• 1997

The Ce-Cr(-Ta) film are one of the most suitable candidates for perpendicular magnetic media. the control of the preparation conditions, such as Ar gas pressure P$\_$Ar/ substrates temperature T$\_$s/, films thickness $\delta$, deposition speed R$\_$d/, is considered to be important to attain ultra high density recording far perpendicular magnetic recording media. In this study, the Co-Cr thin films and Co-Cr-Ta thin films were deposited on the glass side substrates by using Facing Targets Sputtering apparatus(FTS). Crystallographic characteristics and magnetic characteristics were evaluated by X-ray diffractometry(XRD), Vibrating Sample Magnetometer(VSM) respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.49-50
• /
• 2006

[ $Ti(Al,\;O)-Al_2O_3$ ] composite powders were produced by high energy mechanical milling of a mixture of Al and $TiO_2$ powders followed by a combustion reaction. The powders were subsequently thermally sprayed on H13 steel substrates. Microstructural examination was conducted on the composite powders and thermally sprayed coatings, using X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The performance of the coatings was evaluated in terms of micro-hardness and thermal fatigue. The thermally sprayed coatings performed very well in the preliminary thermal fatigue tests and showed no wetting tendency to molten aluminum.