• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.17-24
• /
• 1993

Sol-gel spin-coating technique was used to produce Nb2O5 thin films on silicon substrates from Nb(OC2H5)5 precursor. The films were heat-treated at temperatures between $600^{\circ}C$ and 100$0^{\circ}C$ in oxygen atmosphere and their crystalline phases, chemical states, and dielectric characteristics were investigated by X-ray diffractometry (XRD), Auger electron spectroscopy (AES), and C-V measurements, respectively. After 1 hour heat-treatment at 80$0^{\circ}C$, T-type Nb2O5 was formed, and its chemical composition was homogeneous with no appreciable SiO2 oxide at interfaces between the films and substrates. The films heat-treated at temperatures between $600^{\circ}C$ and 80$0^{\circ}C$ exhibit dielectric constant of less than 20 while the films heat treated at 100$0^{\circ}C$ show dielectric constant of 28.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 춘계 총회 및 학술발표회
• /
• pp.61-62
• /
• 1994

In order to prepare polyion complex membranes useful for the separation of water-alcohol by pervaporation, k-carrageenan containing artionic sulfate groups in the backbone and good hydrophilicity was selected for the polyanion membrane material and poly{1,3-bis[4-butyl pyridinium] propane. bromide}, one of the polycations synthesized in our lab and containing cationic pyridinium groups., was used. The polyion complex membranes were prepared by the ion complex formation between kcarrageenan films and poly{1,3-bis[4-butyl pyridinium] propane. bromide}. On the formation process of polyion complex membranes, the way of potyion complex formation was carefully studied. In order to study the effect of the morphology on the permeation properties of the polyion complex membranes, which is one of the important factors affecting on the permeation properties of membranes but rarely studied, the microstructure behaviors of the polyion complex mem6ranes in methanol-water mixtures with different compositions Were also studied with x-ray diffractometry and polarizing microscopy.

• 대한전기학회논문지
• /
• 제39권10호
• /
• pp.1037-1043
• /
• 1990

Diamond thin films were synthesized from the mixed gases of methane and hydrogen on silicon substrates by RF plasma chemical vapor deposition and deposited films were investigated by SEM, X-ray diffractometry and Raman spectroscopy. It is found that high quality diamond-like carbon films were successfully synthesized by PECVD under the deposition condition of 1-10 vol% of methane concentration, 0.15-0.4torr of reactor pressure, 500W of RF power, and 5-20hr of reaction time. Especially, cubo-octahedral diamond-like carbon particles were synthesized by employing 1.0 vol % of methane concentration and 0.4torr of the reactor pressure.

• 한국표면공학회지
• /
• 제28권6호
• /
• pp.376-385
• /
• 1995

Copper-chromium multilayers with a nominal bilayer thickness of about 400 $\AA$ (200 $\AA$ each) were prepared by dc magnetron sputtering and the evolution of microstructure during heat treatment was investigated by using x-ray diffractometry(XRD), Auger electron spectroscopy(AES) and transmission electron microscopy(TEM). It was observed that an amorphous phase with a thickness of about 40 $\AA$ was formed at the interfaces of the as-deposited Cu/Cr multilayered film using cross-sectional TEM. At elevated temperatures, the Cu(111) reflection showed increasing intensity and decreasing line-width as a result of copper grain growth. The intermixed amorphous phase disappeared after annealing at $250^{\circ}C$ for 1 h and the multilayer structure was stable up to $400^{\circ}C$ for 1 h annealing. At $600^{\circ}C$ annealing, it was observed that the multilayer structure was completely destroyed and copper and chromium phases were fully intermixed.

• 한국잠사곤충학회지
• /
• 제42권2호
• /
• pp.114-119
• /
• 2000

Effects of ethanlo treatment on the structural and thermal characteristics of regenerated Antheraea pernyi silk fibroin (RSF) were investigated. Infrared spectroscopy and X-ray diffractometry showed that the conformational transition of RSF might be affected by concentration of ethanol and its treatment time. The structure of RSF was rapidly changed from random coil to $\beta$-sheet conformation when RSF was treated with les than 75% ethanol concentration. However, RSF treated with ethanol(100%) did not show conformational change. Differential scanning calorimetry showed that exotherm at 232$\^{C}$ disappeared and the intensity of endotherm at 228$\^{C}$ decreased with treatment of 75% ethanol. Dynamic thermal analysis showed that loss modulus (E") and tan $\delta$$\_$E/ of RSF treated with aqueous ethanol was broaden and shifted to higher temperature in comparison with those of untreated RSF.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.344-345
• /
• 2015

Various concentration of copper was dopped in Fe-35%Ni thin sheet by electroforming and their electromagnetic, surface properties were determined. Microstructure observation by scanning electron microscopy revealed that the thin sheet had columnar grains with about 150 nm long. Phase analysis by X-ray diffractometry revealed that the alloy thin sheets were fine crystalline. The average surface roughnesses measured by atomic force microscopy (AFM) were about 14.38 nm. Nano hardnesses determined by tribo-nano indenter were 4.13 GPa. The surface resistances were 2.28 ohm/sq. The maximum magnetization, residual magnetization and coercive force depended on the copper concentration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.187-190
• /
• 1996

Conducting polymers have band structures similar to those of inorganic semiconductors such as silicon. Several electronic devices have been constructed with conjugated polymers, mainly Schottky diodes and Metal-Insulator-Semiconductor Field-Effect Transistors (MISFET's). Organic semiconductor has been reported as active materials in MISFET's.$^{1.4}$ In our laboratory, $\alpha$-Sexithiencyl ($\alpha$-6T) has been synthesized and purified by sublimation method. In this study, thin films of $\alpha$-Sexithienyl were prepared on various substrates in ultra-high vacuum chamber by vacuum evaporation method, so called OMBD(Organic Molocular Beam Deposition).$^{7.9}$ The $\alpha$-Sexithienyl thin films were deposited with various deposition conditions. The crystalline structure, and molecular orientation of these films have being studied by using UV/Vis. spectroscopy and X-Ray Diffractometry.

• 약학회지
• /
• 제30권2호
• /
• pp.87-95
• /
• 1986

Inclusion complexation of $\alpha$-cyclodextrin($\alpha$-CD), $\beta$-cyclodextrin($\beta$-CD) and tri-O-methyl-$\beta$-cyclodextrin(tri-O-methyl-$\beta$-CD) with chlorpamide(CPA) in aqueous solution and in the solid state were studied by the solubility method, spectroscopy (UV, IR), differential scanning calorimetry (DSC) and powder X-ray diffractometry, and all their molar ratios were found to be 1:1. The solid complexes of CPA with three kinds of cyclodextrins were prepared by a freezedrying method, and their dissolution behaviors were examined. As a result, the release of CPA from the inclusion complexes was significantly improved. The intrinsic dissolution rate of CPA in cyclodextrin inclusion complexes was about 51 times ($\alpha$-CD inclusion complex) and 12 tmies ($\beta$-CD inclusion complex) larger than that of intact CPA.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2265-2268
• /
• 2009

Terahertz time domain spectroscopy (THz-TDS) is applied in transmission to identify the five forms of modifications of furosemide and one commercial product from 0.3 THz to 1.6 THz at room temperature. The different absorption spectra of the different forms are sensitive to crystal structures. Density function theory (DFT) calculation was used to understand the vibrational modes of furosemide in the THz region. X-ray powder diffractometry (XRPD) was applied to confirm the different forms of modifications. The results demonstrate that THz-TDS is a potential analytical technique in investigating polymorphic forms in the pharmaceutical fields.

• Corrosion Science and Technology
• /
• 제5권1호
• /
• pp.15-22
• /
• 2006

The introduction of two-grid inside a conventional process system produces a reactive coating deposition and increases metal ion ratio in the plasma, resulting in denser and smoother films. The corrosion behaviors of TiN coatings were investigated by electrochemical methods, such as potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) in deaerated 3.5% NaCl solution. Electrochemical tests were used to evaluate the effect of microstructure on the corrosion behavior of TiN coatings exposed to a corrosive environment. The crystal structure of the coatings was examined by X-ray diffractometry (XRD) and the microstructure of the coatings was investigated by scanning electron microscopy (SEM) and transmission electron spectroscopy (TEM). In the potentiodynamic polarization test and EIS measurement, the corrosion current density of TiN deposited by two grid-attached magnetron sputtering was lower than TiN deposited by conventional magnetron type and also presented higher Rct values during 240 h immersion time. It is attributed to the formation of a dense microstructure, which promotes the compactness of coatings and yields lower porosity.