• Cross-Cultural Studies
• /
• v.41
• /
• pp.7-32
• /
• 2015

This study started from an interest in the unique history and literature of Okinawa and Jeju Islands. The Battle of Okinawa at a late stage of the Asia-Pacific theatre of World War II, and the indiscriminate violence in the 4.3 Jeju Massacre directly show the shared tragedy of the two islands; furthermore, they are are both located on the frontier of a nation's authority, and thus are symbolic cases. This thesis analyzes Oshiro Tatsuhiro's Island of the Gods and Hyun, Ki Young's Sooni's Uncle, both directly deal with the tragedy of two different but analogous incidents, and question the difference in memory struggle and definitions. Thus, though both novels show a similarity in focusing on and exposing the forbidden memory of mass suicide and massacre, the methods of suggesting the course of memory struggle are different. For example, in contrast to Hyun who took a different approach from the fury, accusations, and violence of South Korea to espoused forgiveness and reconciliation, Oshiro showed the changes in the form of responding to the mainland Japan.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.34-39
• /
• 2022

Sustained economic development around the world is accelerating resource depletion. Research and development of secondary batteries that can replace them is also being actively conducted. Secondary batteries are emerging as a key technology for carbon neutrality. The core of an electric vehicle is the battery (secondary battery). Therefore, in this study, the temperature change by the heat source of the hammer and the rotational speed (rpm) of the abrasive disc of the Classifier Separator Mill (CSM) was repeatedly calculated and analyzed using the heat flow simulation STAR-CCM+. As the rotational speed (rpm) of the abrasive disk increases, the convergence condition of the iteration increases. Under the condition that the inlet speed of the Classifier Separator Mill (CSM) and the heat source value of the disc hammer are the same, the disc rotation speed (rpm) and the hammer temperature are inversely proportional. As the rotational speed (rpm) of the disc increases, the hammer temperature decreases. However, since the wear rate of the secondary battery material increases due to the strong impact of the crushing rotational force, it is determined that an appropriate rpm setting is necessary. In CSM (Classifier Separator Mill), it is judged that the flow rate difference is not significantly different in the direction of the pressure outlet (Outlet 1) right above the classifier wheel with the fastest flow rate. Because the disc and hammer attachment technology is adhesive, the attachment point may deform when the temperature of the hammer rises. Therefore, it is considered necessary to develop high-performance adhesives and other adhesive technologies.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.153-166
• /
• 2023

Purpose - This research empirically analyzes the influence of economic policy uncertainty and free trade agreements (FTAs) on bilateral trade volumes between Korea and its trading partners. The study investigates whether fluctuations in the Economic Policy Uncertainty Index (EPUI) for both Korea and its trading partners significantly impact trade volumes and whether the implementation of FTAs mitigates these effects. Design/methodology - The study employs dynamic panel data analysis using the system generalized method of moments (system GMM) estimation method to achieve its research objectives. It utilizes country-month-level panel data, including the EPUI, trade volume between Korea and its trading partner countries, and other pertinent variables. The use of system GMM allows for the control of potential endogeneity issues and the incorporation of country-specific and time-specific effects. Findings - The analysis yields significant results regarding the impact of economic policy uncertainty on Korea's exports and imports, particularly before the implementation of FTAs. An increase in the EPUI of trading partners leads to a notable increase in Korea's exports to them. Conversely, an increase in Korea's EPUI negatively affects its imports from trading partners. However, post-FTA implementation, the influence of each country's EPUI on trade volume is neutralized, with no significant difference observed. Originality/value - This research contributes to the existing literature by providing empirical evidence on the interaction effects between economic policy uncertainty and FTAs on bilateral trade volumes. The study's uniqueness lies in its examination of how FTAs mitigate the impact of economic uncertainty on trade relations between countries. The findings underscore the importance of trade agreements as mechanisms to address economic risks and promote international trade relations. In a world where global market uncertainties persist, these insights can aid policymakers in Korea and other countries in enhancing their trade cooperation strategies and navigating challenges posed by evolving economic landscapes.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.183-192
• /
• 2021

This study was purposed to explore the learning culture through the related literature and research review in Jewish Havruta which has interaction, critical reflection, and the driving force creating a better world. The prior researches on Havruta mainly tend to as ways to increase learners' interest in learning and studies as curriculum or teaching methods such as creativity, understanding, and problem-solving skills. However, Havruta is not just method to study subjects, but rather a process of developing thinking through dialogue and discussion. Therefore, Havruta's essential meaning as a lifelong learning should be explored. Studies showed that Jews embody the thinking process from interpreting, analyzing, setting up logic, questioning, discussing, and debating Talmud with others anytime, anywhere, and anyone throughout their learning culture. It develops basic skills for life, forms an integrated personality in relationships with others, and continuously conducts lifelong learning to shape one's own beings. Therefore, lifelong learning culture would be sharing information that one has in the process of discussion through dialogue between two or more people, and supporting and encouraging the other's failure or fear rather than attacking them. The embodiment of thinking process in which people teach and learn eachother, accept the difference, and expand thought would be significant foundation to create lifelong learning culture.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.2
• /
• pp.131-140
• /
• 2020

Recently the importance of BIM (Building Information Modeling) that enables 3D location-based design and construction work is being highlighted around the world. In Korea, the road map has been established to settle the design based on BIM using drone survey results by 2025. As the first step, BIM would be applied to road construction projects worth more than 50 billion Korean Won from 2020. On the other hand, drone survey regulation has been enacted and the data for drone survey cost were also included on Standard of construction estimate in 2020. However, more careful improvement is required to reflect drone survey results in BIM design and construction. Currently, Engineering instructions and Standard of construction estimate specifies that earthwork volume must be calculated by cross section method only. So it is required to add the method of DEM (Digital Elevation Model) based volume calculation on these regulations to realize BIM application. In order for that, this study verified the method of DEM based earthwork volume calculation. To get an accurate DEM for accurate volume computation, drone survey was carried out according to the drone survey regulation and then could get an accurate DEM data which have errors less than 3cm in X, Y and 6.8cm in H. As each DEM cell has 3D coordinate component, the volume of each cell can be calculated by obtaining the height of area of the cell then total volume is calculated by multiplying total number of cells by volume of each cell for the construction area. Verification for the new calculation method compare with existing method was carried out. The difference between DEM based volume by drone survey and cross section based volume by traditional survey was less than 1.33% and it can be seen that new DEM method will be able to be applied to BIM design and construction instead of cross section method.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2009

Consumers earn a number of points for every purchase and then they can exchange a specified number of points for a desired reward in a typical loyalty program. The immediate payoff of their effort given as points is not the real reward they actually care about. It is merely an instrument (or medium) which has no value in itself. In a real world, consumers frequently choose the option with a bigger medium even though the economic value of the option is not changed by the medium. We call it 'medium effect.' In this study we explored if the size of medium affects consumers' preferences. For this we controlled the reward options with three types of medium (small, medium, big) and measured the magnitude of preference difference among the three types of reward options. In addition, we manipulated comparability of reward options with wine and gas discount coupon. We confirmed that choosing one of two wines was easier than that of the two gas coupons. 123 respondents were allocated into three experimental groups. In three experimental grounds, the ratios of the focused reward option's medium to the compared reward option's medium were different. For example, the focused reward option has 10 million points whereas the compared reward option has 10 million points for 1 million won purchase amount in the first group. Then each respondent was asked to choose one of two loyalty programs (focused program vs. compared program) in two different conditions (comparability between reward options. easiness vs. difficulty). To compare the medium effects among the experiment conditions we used chi-squares tests. The empirical results show consumer preference increases and then decreases as reward mile-ages/points given according to purchase amount increase. Additionally, they let us know that comparability of alter natives affects change of consumer preference by reward mileages/points.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.6
• /
• pp.66-78
• /
• 2003

The purpose of this study was to minimize the forest disturbance around an entry road of a power transmission tower construction site between Taean and Sinsesan, Chungnam. The main study field was classified into existing materials and a GIS, remote sensing analysis, and a field examination. This information was used to identify the most suitable entry road using a degree of green naturality map, eco-naturality map, actual vegetation map, and a forest state map as the existing materials. Also, the study used an normalized difference vegetation index, altitude and slope map in order to make the evaluation materials which used an remote sensing image, and GIS. This data was used to choose an optimum area, and diagnosed the current condition of the vegetation with a field survey of the area. It analyzed vegetation structure, species diversity, the age of trees in a field examination. Subsequently, we proposed four area types based on the analysis results--preservation area, transplantation area, restoration area and development area. As a result, the preservation area was categorized into 8 grades, according to the degree of green naturality, large area of breast diameter at Pinus densiflora community, competition area of Pinus densiflora and Quercus spp. and Quercus spp. community of over 20 years old. A transplantation area established 46 optimum areas according to the GIS analysis and vegetation investigation results. Vegetation restoration plan for disturbance area should be made based on ecological value of existing vegetation to worthwhile area as Quercus spp. mixing forest proposed. The development area selected a ecological worthless place as an artificial forest where Pinus densiflora and Pinus thunbergii growth is poor. This research results suggest that restoration of vegetation will be possible in the real world. Also, ecological restoration guidelines will be made through building and analyzing data base and routine monitoring of transplantation and restoration area.

• Journal of Environmental Science International
• /
• v.19 no.2
• /
• pp.229-236
• /
• 2010

As air pollution has emerged as one of the most pressing urban environmental concerns, many studies have investigated the influence of air pollutants(ex: $O^3$, $NO^2$, $SO^2$, Acid rain, etc.) on roadside trees and urban grove. In Korea, population density started to increase since the industrialization. Since dense population aggravates our living conditions, it's very important for us to preserve and keep a lively and refreshing nature in order to live with green nature in harmony under the current artificial environment-dominating world. In metropolitan cities, the production of pollutants increases in proportion to population growth. The vehicle exhaust gas and air pollutants from cooling and heating systems have been the major causes of acid rain. Furthermore, tire particles which are naturally produced by tire wearing on roads and other toxic substances in exhaust gas have caused a problem in human health directly and indirectly. In fact, a lot of studies have analyzed air pollution, roadside trees and plants in Korea. However, they are mostly limited to covering the influence of air pollution on the growth of plants. No paper has clearly explained why air pollution-resistant or-vulnerable species has shown different reactions yet. Even though a lot of urban roadside trees have died or stopped to grow from time to time, this kind of problem has not been properly examined. This paper is aimed to comparatively analyze physio-ecological characteristic such as photosynthesis, chlorophyll contents, soil volume water figure out their relationship with environmental factors against the expanding roadside trees in Cheong-ju, and provide basic data for management of roadside trees and elaboration of urban environment preservation policies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3312-3327
• /
• 2020

Plant diseases are a significant yield and quality constraint for farmers around the world due to their severe impact on agricultural productivity. Such losses can have a substantial impact on the economy which causes a reduction in farmer's income and higher prices for consumers. Further, it may also result in a severe shortage of food ensuing violent hunger and starvation, especially, in less-developed countries where access to disease prevention methods is limited. This research presents an investigation of Directional Local Quinary Patterns (DLQP) as a feature descriptor for plants leaf disease detection and Support Vector Machine (SVM) as a classifier. The DLQP as a feature descriptor is specifically the first time being used for disease detection in horticulture. DLQP provides directional edge information attending the reference pixel with its neighboring pixel value by involving computation of their grey-level difference based on quinary value (-2, -1, 0, 1, 2) in 0°, 45°, 90°, and 135° directions of selected window of plant leaf image. To assess the robustness of DLQP as a texture descriptor we used a research-oriented Plant Village dataset of Tomato plant (3,900 leaf images) comprising of 6 diseased classes, Potato plant (1,526 leaf images) and Apple plant (2,600 leaf images) comprising of 3 diseased classes. The accuracies of 95.6%, 96.2% and 97.8% for the above-mentioned crops, respectively, were achieved which are higher in comparison with classification on the same dataset using other standard feature descriptors like Local Binary Pattern (LBP) and Local Ternary Patterns (LTP). Further, the effectiveness of the proposed method is proven by comparing it with existing algorithms for plant disease phenotyping.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.372-380
• /
• 2011

This study was conducted to assess meat quality and sensory properties of pork bellies from immunocastrated males (IC) compared to meat from surgically castrated males (SC), intact males (IM), and females (FE). Pork bellies from IC had significantly higher pH values than meat from either SC or FE. Pork bellies from IC showed lower CIE $L^*$ values than those from SC, but were redder (higher CIE $a^*$ values) than meat from SC or FE. However, no differences in visual color were observed between pork bellies from IC and SC pigs using National Pork Producer Council scales. Water holding capacity was higher in SC and FE than that in IC. IC showed no significant difference in cooking loss and shear force values compared with those of SC. Both SC and IC had improved fat content when compared to that in IM, and IC meat showed a similar fat content to that of FE. Pork bellies from IC showed higher ratings for all visual evaluation traits than those of SC and were the same as meat from FE. Boar odor was not significantly different among the treatments. IC was rated similar to SC for taste, tenderness, and overall acceptability.