• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.86-91
• /
• 2006

Oil spills caused by the accidents have been occurred from house and factory waste, grounded tanker, the rupture of storage tank and oil pipelines, the deterioration of various industrial facilities, etc. Many oil spills result in contamination of shorelines and workplace. Fire and explosion may happen from these spills. There are several technologies used for clean-up application, which include use of oil dispersing agents, absorbents, solidifiers, booms and skimmers by physical, chemical, and biological methods. Methods for oil spill clean-up operation are classified into the absorption type, gel type and self-swelling type. Porous materials with oil absorptive properties are classified into micropore, mesopore, and macropore depending on their pore sizes. Recently, new porous materials with smaller size have been developed, but the selective oil absorption in water-in-oil interface demonstrates the macro pore size. In this study oil absorption effects were evaluated using the organic porous materials with a complex function of gel type and swelling type. Samples were subjected to analysis by FT-IR spectroscopy and were characterized in terms of gel formation and morphologies. Oil sorption capacity, pressure retention force and gel strength were also measured. From these results, the physicochemical reactivity before and after gelation was verified and the industrial applications of clean-up operation were suggested.

• Journal of Construction Engineering and Project Management
• /
• v.8 no.1
• /
• pp.10-21
• /
• 2018

Many construction projects involve a plethora of safety-related problems that can cause loss of productivity, diminished revenue, time overruns, and legal challenges. Incorporating data collection and analytics methods can help overcome the root causes of many such problems. However, in a dynamic construction workplace collecting data from a large number of resources is not a trivial task and can be costly, while many contractors lack the motivation to incorporate technology in their activities. In this research, an Android-based mobile application, Preemptive Construction Site Safety (PCS2) is developed and tested for real-time location tracking, trajectory prediction, and prevention of potential collisions between workers and site hazards. PCS2 uses ubiquitous mobile technology (smartphones) for positional data collection, and a robust trajectory prediction technique that couples hidden Markov model (HMM) with risk-taking behavior modeling. The effectiveness of PCS2 is evaluated in field experiments where impending collisions are predicted and safety alerts are generated with enough lead time for the user. With further improvement in interface design and underlying mathematical models, PCS2 will have practical benefits in large scale multi-agent construction worksites by significantly reducing the likelihood of proximity-related accidents between workers and equipment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.56
• /
• pp.65-85
• /
• 2000

Industrial accidents have been consistently increased in terms of medical costs, lost work days, and incidence rates every year in Korea. Since the infrastructure of the industry changed shifts rapidly from 1980s in the developing countries such as South Korea, the nature and magnitude of the industrial accidents have also undergone a major shift. The situation is especially severe in small-to-medium sized industry(SMI). This article reports the development of a systematic evaluation system of risk factors specifically for the SMIs. The new approach introduced by this article is geared to the systematic identification and evaluation of the injuries from power press machines using the Analytic Hierarchy Process with the key evaluation data generated and evaluated by the employees on site. A total of 21 companies was studied and surveyed using the hierarchical structures of the cause-effect relationship of the mechanical injuries and their countermeasures. For the relative weighting of each risk factor, separate questionnaire survey was conducted for the selected workers from each company who had worked for more than 10 years in press work. Most participants (48 out of 62) replied that human attributes were the most significant factors for mechanical injuries fellowed by administration, machine, and work environment factors. The result also showed that the self-motivated risk assessment and safety enhancement activities would be an effective and efficient way of managing the risk factors in the SMIs.

• Environmental Analysis Health and Toxicology
• /
• v.22 no.1 s.56
• /
• pp.91-101
• /
• 2007

The new chemicals are developed and circulated without the verified toxicity data. So, the accidents and occupational diseases, such as explosion, fire, suffocation about deadly poisons etc. are frequently to workers. Classifications of chemicals suited with guideline and an offer of correct chemical information data are the molt important thing for the establishment of suitable chemical management system. The GHS (Globally Harmonized System of classification and labeling of chemicals) is based with the chemical classifications and unification plan. The warning symbol and phrases are established for improvements of chemical information data system. According to these unified and improved systematic form of data, and the chemical information data, the workplaces will be presented many chemical safety and risk data correctly. In this paper, we will present constructions and accomplishment contents-based chemical management of workplace through development of chemical information data and the nice using for new chemical investigation and risk assessment of chemicals in workplaces.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.53-58
• /
• 2018

Background: Since the Republic of Korea became a labor-force-importing country, the number of foreign workers has increased gradually, especially in the construction industry. The main objective of this study was to examine the differences in safety perception between domestic and foreign workers at Korean construction sites. Methods: A total of 891 Korean and foreign workers were surveyed: 140 foreign and 751 Korean workers. The general characteristics and 25 factors influencing safety perception were considered in the questionnaire. Regression and correlation analyses were conducted to examine the variables of workers' safety perception. Results: Differences of nationality (F = 7.379, p < 0.001) and workplace accidents were statistically significant for both domestic (F = 1.503, p < 0.05) and foreign workers (F = 7.868, p < 0.05). In contrast, age, education, and Korean language level were significant variables only for foreign workers. Correlation coefficients of $0.428^{**}$ for Korean and 0.148 for foreign workers between two items - namely, "management's commitment to safety" and "blaming staff when they make mistakes" - support the conclusion that foreign workers do not trust management's commitment to safety, while Korean workers have confidence in these commitments. Conclusion: Foreign workers' level of safety perception should rise to the same level as Korean workers, especially in terms of obeying safety rules, safety education performance, and safety beliefs. Therefore, an improvement plan for the Korean construction industry is suggested in order to have a better safety level at construction sites with foreign workers.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.9-22
• /
• 2014

Constructions sites are affected by Diversity workplace, complexity of construction, Change of place, Mobility of workers and so on. In a single establishment, Prime contractors and subcontractors have to conduct their work at the same time. There are a lot of unpredictable risks when the construction is running, coordination between contractors is very important to do a risk assessment under the condition. Large Construction companies were investigated by previous studies. Survey research is applied to the risk assessment. In the writing, Risk assessment of the entire lower level. Because of the low level of risk factors to find. Also, There was a limit to investigate accidents. Confirmed that Effort to derive a risk factors were desperately of the risk assessment. Results were obtained through previous studies. The PCM is several experts should be joined. Experts Site Manager, Supervisor, Safety Manager, Director Contractor, Work team leader is required to participate. Construction plans, Process Planning to the risk find beforehand. And Determines how the operations and the control. Also, Made it into the database. and PCRA can be used in the risk assessment was developed.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.607-618
• /
• 2023

Purpose: In this study, we proposed a plan to establish and implement a safety and health management system by utilizing corporate resources so that manufacturing companies can effectively respond to the Serious Accident Punishment Act. Methods: We identified critical factors and response strategies necessary for manufacturing companies to respond to the Severe Accident Punishment Act effectively and surveyed employees working at the company regarding their importance and performance. Results: In this study, we presented a method of strategically constructing the response strategies (20) shown in previous studies by matching them with the company's resources (leadership, organization, budget, education, and awareness). In particular, leadership refers to the ability of managers who can prevent serious accidents by carrying out safety and health security obligations to avoid safety and health hazards or risks to employees in the business or workplace that is controlled, operated, and managed. Conclusion: Based on the manager's firm leadership, the system's purpose and direction must be accurately set and sufficiently communicated to members. In addition, for companies to identify and improve risk factors on their own, a Process approach must be established to improve execution by referring to legal standards together with field managers and supervisors.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.3
• /
• pp.39-49
• /
• 2021

According to the recent "Status of Industrial Accidents at the End of December 2020" released by the Ministry of Employment and Labor, each industry is subject to industrial accidents. The number of accident deaths by construction industry, accident deaths by accident type fell, and accident deaths by workplace size were 5 to 49, indicating that most accident deaths occurred due to falling accidents at small construction sites. Therefore, urban living houses are small construction sites, and the probability of falling accidents is very high. Fall simulation training for disaster occurrence is conducted mainly by large construction ordering organizations in the public sector, and it is the first case in Korea that a housing construction company has conducted at a small construction site. This study analyzed and presented the definition, construction characteristics, and safety management status of urban living houses, and developed and spread an emergency relief procedure manual in the event of a fall accident to minimize deaths.

• Safety and Health at Work
• /
• v.3 no.4
• /
• pp.278-286
• /
• 2012

Objectives: Authors investigated the pattern of the rate of occupational injuries and illnesses (ROII) at the level of enterprises in order to build a network for exchange of experience and knowledge, which would contribute to workers' safety and health through safety climate of workplace. Methods: Occupational accidents were analyzed at the manufacturing work site unit. A two step clustering process for the past patterns regarding the ROII from 2001 to 2009 was investigated. The ROII patterns were categorized based on regression analysis and the patterns were further divided according to the subtle changes with Mahalanobis distance and Ward's linkage. Results: The first clustering of ROII through regression analysis showed 5 different functions; 29 work sites of the linear function, 50 sites of the quadratic function, 95 sites of the logarithm function, 62 sites of the exponential function, and 54 sites of the sine function. Fourteen clusters were created in the second clustering. There were 3 clusters in each function categorized in the first clustering except for sine function. Each cluster consisted of the work sites with similar ROII patterns, which had unique characteristics. Conclusion: The five different patterns of ROII suggest that tailored management activities should be applied to every work site. Based on these differences, the authors selected exemplary work sites and built a network to help the work sites to share information on safety climate and accident prevention measures. The causes of different patterns of ROII, building network and evaluation of this management model should be evaluated as future researches.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.5
• /
• pp.417-425
• /
• 2018

This paper proposes a safety management method that extracts ETA (event tree analysis) based scenario and combines ICT technology to reduce serious disasters occurring workplace for shipbuilding and offshore plant. The statistics of Safety and Health Agency and (previous)Ministry of Public Safety and Security show that the most frequent accident among the serious disasters related to shipbuilding and offshore plant is falling. The main cause of accidents is absence of a safety belt and safety belt ring. To solve these problems, we create ETA based scenarios to derive results based on safety considerations. Based on these results, we propose a solution by applying ICT technology for accident prevention. Deriving ETA based scenarios and ICT technology, the proposed solutions include a system for detecting the wearing of safety belts and safety helmets, a system for detecting whether or not the safety belts are connected, and a hook system for measuring safety distances. These safety related systems can reduce the probability of death of workers. By preventing accidents using the proposed method, we can reduce serious disasters in shipbuilding and offshore plant and establish systematic safety management.