• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.483-493
• /
• 2009

The global economic recession caused a great change of the labor environment such as restructurings and unstable employment. This facts brought about an increase in sense of rivalry, over workload, job uncertainty and lowering of self-confidence. Due to the fact that the work process and employing system in construction field is little differ from normal industries, especially, labors working in construction field are much exposed to the job stress. On this study, we survey construction-field labors and made an analysis of the gathered data through the statistic method to reveal what kind of job-stress factors influence on the defects of construction works. As the result, we investigated the truth of the induction factors which cause the job-stress in costruction field and proposed an alternative plan for an effective job-stress management which make the defect rate low.

• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.41-57
• /
• 2000

작업부하 산정 모델을 개발하기 위해 인간-기계 시스템 환경에서 작업자의 작업성 취 및 생산성에 영향을 미치는 내적·외적 작업부하 요인들을 발견하여 이를 모델개발 에 고려하였다. 이들 작업부하 요인들이 작업자에 감지되는 정도에 대한 반응을 5점 척도를 도입하여 숫자가 아닌 자연어로 할 수 있게 하였으며 이렇게 작업자에 의해 주관적으로 판단된 작업스트레스 요인들은 각기 다른 가중치를 판단하기 위해 AHP(Analytic Hierarchy Process)를 사용하여 작업자가 직접 느끼는 작업부하 스트레스 정도를 비교판단 하게 하였고 이렇게 개념화된 모델을 실제 산업현장에서 사용할 수 있도록 컴퓨터를 통한 시험적인 작업부하 분석시스템을 개발하였다. 본 연구에 대한 검증을 위하여 실제 산업체에 종사하는 작업자들을 대상으로 인간공학적 작업부하 모델을 적용하여 측정하고 이를 작업자의 생리학적인 변화와의 관계를 비교 분석하여 본 결과 본 논문에서 개발된 모델은 작업부하 스트레스를 비교적 정확하게 측정할 수 있어서 앞으로 산업현장에 적용될 수 있는 신뢰성 있는 연구로 판단된다.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1104-1113
• /
• 2016

Non-linear document navigation refers to the process of repeatedly reading a document at different levels to provide an overview, including selective reading to search for useful information within a document under time constraints. Currently, this function is not supported well by small-screen tablets. In this study, we propose the concept of structure-aware touch-based scrolling (SATS), which allows structural document navigation using region-dependent touch gestures for non-sequential navigation within tablets or tablet-sized e-book readers. In SATS, the screen is divided into four vertical sections representing the different structural levels of a document, where dragging into the different sections allows navigating from the macro to micro levels. The implementation of a prototype is presented, as well as details of a comparative evaluation using typical non-sequential navigation tasks performed under time constraints. The results showed that SATS obtained better performance, higher user satisfaction, and a lower usability workload compared with a conventional structural overview interface.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.107-111
• /
• 2013

The welding distortion is caused by welding heat in the structures which are widely used in shipbuilding and automotive industries, thus many researchers have proposed such methods to control the welding distortion through trials and numerical studies. The welding distortion has been the main cause of low productivity due to the structural strength degradation, apparent flaw, additional deformation caused by the process followed the current assembly step, and the increase of correction workload. The deformation of fillet welding is investigated in this study, and the influence of the rib height on the welding distortion is verified through the actual experiment. And the numerical analysis model using the FE software MSC.marc for analysis of welding distortion is proposed.

• Communications for Statistical Applications and Methods
• /
• 제18권4호
• /
• pp.433-443
• /
• 2011

잉여금의 수준에 따라 이단계의 보험요율이 적용되는 복합 포아송 위험 모형을 고려한다. 먼저 이 위험 모형에 대응되는 이단계 서비스율의 M/G/1 대기행렬 모형을 설정하고, M/G/1 대기행렬 모형에서 작업량이 0에 도달하기 전에 과부하가 발생하는 확률을 유도한다. 이과부하 확률을 이용하여 위험모형에서 잉여금이 목표값에 도달하기 전에 파산하는 확률을 구하고, 보험 청구액이 지수분포를 따르는 경우의 파산 확률을 계산한다.

• Industrial Engineering and Management Systems
• /
• 제8권3호
• /
• pp.131-138
• /
• 2009

The variable sampling inspection scheme with screening for the purpose of assuring the upper limit of maximum expected surplus loss after inspection has been proposed. In this inspection scheme, it has been assumed that a product lot consists of products manufactured through a single production line and lot quality characteristics follow a normal distribution. In the previous literature with respect to inspection schemes, it has been commonly assumed that lot quality characteristics obey a single normal distribution under the condition that all products are manufactured in the same condition. On the other hand, the production line is designed in order that the workload of respective processes becomes uniform from the viewpoint of line balancing. One of the solutions for the bottleneck process is to arrange the workshops in parallel. The lot quality characteristics from such a production line with the process consisting of some parallel workshops might not follow strictly the single normal distribution. Therefore, we expand an applicable scope of the above mentioned variable sampling inspection scheme with screening in this article. Concretely, we consider the variable sampling inspection with screening for the purpose of assuring the upper limit of average outgoing surplus quality loss in the production lots when the lot quality follows the mixed normal distribution.

• 항공우주기술
• /
• 제8권1호
• /
• pp.172-178
• /
• 2009

최근에 개발된 소형제트기는 조종사의 피로경감과 더불어 비행안전성 제고를 위하여 자동비행시스템이 필수적인 요소로 인식되고 있다. 또한, 소형항공기의 항공전자시스템은 집중화된 다중프로세서(centralized multi-processor)와 다중연산 계산구조(multi-process computing architectures)로서 B-777의 Integrated Modular Avionics와 유사한 시스템을 장착하는 추세이다. 이러한 소형항공기 시스템 변화는 고전적 비행방식인 조종사 중심의 비행방식에서 자동비행제어시스템(AFCS) 중심의 비행방식으로의 변화를 야기하였으며 자동 비행제어시스템의 비중은 보다 더 증가하고 있다. 이에 본 논문에서는 상용 소형항공기용 자동비행장치(Autopilot)에 대한 HILS를 구성하여 성능을 검증하였다. 또한, 현재 개발하고 있는 FBW용 FCC(Flight Control Computer)에 탑재될 자동비행 알고리듬에 대한 성능을 PILS를 통하여 확인하였고, 상용 Autopilot에 대한 HILS 결과와 같은 조건에서 비교하여 그 성능을 검증하였다.

• 대한인간공학회지
• /
• 제23권4호
• /
• pp.9-21
• /
• 2004

As menu structure of household appliance is complicated, user's cognitive workload frequently occurs errors. In existing studies, errors didn't present that interpretation for cognitive factors and alternatives, but are only considered as statistical frequency. Therefore, error classification and analysis in tasks is inevitable in usability evaluation. This study classified human error throughout information process model and navigation behavior. Human error is defined as incorrect decision and behavior reducing performance. And navigation is defined as unrelated behavior with target item searching. We searched and analyzed human errors and its causes as a case study, using mobile phone which could control appliances in near future. In this study, semantic problems in menu structure were elicited by SAT. Scenarios were constructed by those. Error analysis tests were performed twice to search and analyze errors. In 1st prototype test, we searched errors occurred in process of each scenario. Menu structure was revised to be based on results of error analysis. Henceforth, 2nd Prototype test was performed to compare with 1st. Error analysis method could detect not only mistakes, problems occurred by semantic structure, but also slips by physical structure. These results can be applied to analyze cognitive causes of human errors and to solve their problems in menu structure of electronic products.

• 한국시뮬레이션학회논문지
• /
• 제8권3호
• /
• pp.49-66
• /
• 1999

Semiconductor wafer fabrication is known to be one of the most complex manufacturing processes due to process intricacy, random yields, product diversity, and rapid changing technologies. In this study we are concerned with the impact of lot release and dispatching policies on the performance of semiconductor wafer fabrication facilities. We consider several semiconductor wafer fabrication environments according to the machine failure types such as no failure, normal MTBF, bottleneck with low MTBF, high randomness, and high MTBF cases. Lot release rules to be considered are Deterministic, Poisson process, WR(Workload Regulation), SA(Starvation Avoidance), and Multi-SA. These rules are combined with several dispatching rules such as FIFO (First In First Out), SRPT (Shortest Remaining Processing Time), and NING/M(smallest Number In Next Queue per Machine). We applied the combined policies to each of semiconductor wafer fabrication environments. These policies are assessed in terms of throughput and flow time. Basically Weins fabrication setup was used to make the simulation models. The simulation parameters were obtained through the preliminary simulation experiments. The key results throughout the simulation experiments is that Multi-SA and SA are the most robust rules, which give mostly good performance for any wafer fabrication environments when used with any dispatching rules. The more important result is that for each of wafer fabrication environments there exist the best and worst choices of lot release and dispatching policies. For example, the Poisson release rule results in the least throughput and largest flow time without regard to failure types and dispatching rules.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.150-160
• /
• 2020

In this paper, we introduce a pilot's scheduling model which is able to maintain and balance their capabilities for each relevant skill level in military helicopter squadron. Flight scheduler has to consider many factors related pilot's flight information and spends a lot of times and efforts for flight planning without scientific process depending on his/her own capability and experience. This model reflected overall characteristics that include pilot's progression by basis monthly and cumulative flight hours, operational recent flight data and quickly find out a pinpoint areas of concern with respect to their mission subjects etc. There also include essential several constraints, such as personnel qualifications, and Army helicopter training policy's constraints such as regulations and guidelines. We presented binary Integer Programming (IP) mathematical formulation for optimization and demonstrated its effectiveness by comparisons of real schedule versus model's solution to several cases experimental scenarios and greedy random simulation model. The model made the schedule in less than 30 minutes, including the data preprocessing process, and the results of the allocation were more equal than the actual one. This makes it possible to reduce the workload of the scheduler and effectively manages the pilot's skills. We expect to set up and improve better flight planning and combat readiness in Korea Army aviation.