• Fashion & Textile Research Journal
• /
• v.9 no.2
• /
• pp.237-242
• /
• 2007

The purpose of this study is to examine the functionality with improved pattern-design working uniform(protocol, P) and current working uniform(control, C). Movement functionality evaluation of improved pattern-design working uniform was carried out through sensory evaluation of working uniform. Movements for the sensory evaluation consisted of four types of up and down and horizontal movements of the shoulders, four types of waist movements and five types of knee movements. The results have been shown as follows: The sensory value of back girth, wrist, side seam area of the "P" with the posture of raising an arm forward up to $90^{\circ}$ and the maximal arm's vertical movement significantly improved compared to the "C". Therefore, it can be concluded that movement functionality was increased with the improved pattern-design working uniform in the respect of arm's up and down movement. Furthermore, for P, Movement functionality improvements were shown in P with arm's horizontal movement, waist bending movement, and knee movement. Current working uniform(C) is jumper-type which wa designed without consideration for movement functionality of the arms and legs. But Pattern-design uniform(P) which was developed in this study. Therefore, the more patterns development, the better movement functionality in working uniform. The improved movement functionality improvements in working uniform will provide not only personal pleasantness but also efficiency of productivity at construction sites. In respect of human body's movement, further study for improved working uniform is required.

• Journal of Technologic Dentistry
• /
• v.15 no.1
• /
• pp.27-41
• /
• 1993

Degree of noise by personal dental laboratory working process and degree of noise by complex dental laboratory working process were measured separtely. The time of exposure to noise greater than 70dB was analyzed. Then, the whole degree of noise in dental laboratory was estimated on the basis of afore-mentioned information. Questionaire were employed to investigate the mental, emotional and physiological effects of noise in dental technicians, The purpose of this study was to provide basic information on keeping dental techneicans who are exposed to noise pollution in good working condition and good health. Results obtained are as follows ; 1. Polishing process in each working part showed high degree of noise greater than 70dB in terms of degree of noise by personal working. 2. Degree of noise by complex working process in each working part was greater than that of personal working process. 3. Time of exposure to noise complex working process the part of porcelain 150min, partial denture 120 min, crown and bridge 100 min, full denture 80 min. 4. Degree of noise by time in dental laboratory was 80dB in general for polishing process and below 75dB for waxing process. 5. Effects of noise on mental and emotional state of dental technicians showed that they felt irritated every day(14%), irritated once in a while(29%) and easily ger mad(19%). 6. Effects of noise on heart and stomach were hyper-gastric acid(38%), gastric ulcer(11%), gastritis(5%), deuodenal ulcer(3%) and weak heart function(32%). 7. Effects of noise in the hearing ability were weak(39%), moderate(33%) and normal(14%) Data presented in this study demonstrated that noise in the dental laboratory exerts profound effect on dental technicians mentally, physiologically and emotionally, in light of the above results, therefore, it appears advisable to devots substantial on the management of working condition and put further(continuing) efforts in the investigation for reducing noise problem.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.134-152
• /
• 2008

Functional, aesthetic and symbolic working uniforms in the industrial complex are demanded by employees and employers. The purpose of this research was to find out the actual wearing condition and preference of the working uniform design in the industrial complex. The research selected 7 enterprise subjects located in the Changwon National Industrial Complex and adopted a questionnaire method. 912 workers categorized into 4 work groups according to their work posts replied in total. The data and the degrees of satisfaction/preference of the working uniforms were analysed into descriptive statistics and F-tests by using the SPSS S/W package. The results were as follows: First, the style of the working uniform was the standard two-piece style. Second, the degree of the satisfaction with the entrepreneurial image implied to the working uniform was 2.83 throughout the 5-scale evaluation. In addition, the degree of the satisfaction with the working uniform colors was in between 2.94 and 2.96. Third, unsatisfied parts of the upper and lower uniform garments were: sleeve > pocket > collar; and waist belt loop > hip pocket > hem line respectively. Fourth, beige was the most preferred color for the working uniform top and bottom both. The most preferred color images were the calm and safety and the bright and light in order. Especially, the demand on the safety factors and soil proof colors of the outside field workers was much higher than the clerical workers. Fifth, the blouson type jacket with shirts collar or soutien roll collar was more preferred to than the casual style; and the straight formal pants were more preferred to than the casual/sweat sports pants styles. Sixth, inner pockets to keep the mobile phone and pens were required for upper garment details specially by manufacture workers. Increase of the waist belt loop numbers was required by all work groups.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.395-401
• /
• 2011

Objective: This study examined the effects of working chair that was developed for farmers who work in grapevine's cluster thinning. Background: Agricultural work involves some of the nation's highest occupational risk exposures. Fruit cultivation has been recognized as one of the most hazardous crops in which to work. Grapevine cluster thinning task involve activities related to the main risk factors associated with upper limb work-related musculoskeletal disorders. Method: An experiment was designed to test the working chair. Six healthy male($25.8{\pm}4.9years$) were selected as the subjects for this study. Electromyography(EMG) was used to monitor the muscles activity, and Electro-goniometer was used to measure the ranges of motions of the elbow, trunk and knee. Subjective test was also carried out to examine discomfort body parts and their pain intensity. A grapevine's working space was built for the experiment and working chair was installed on it. In order to examine the muscle activity and range of motion, subjects used to the working chair for 30 minutes for each experimental condition. Another test without working chair was also performed for comparison. %MVC was used to quantify the level of muscle activity. Results: Decreases of muscle activity was found in all leg muscles and significant decrease of muscle activity was found in left Gastrocnemius. The range of motion of the trunk and knee also decreased when working chair used. Discomfort in lower back, thigh and shank region were reduced significantly. However, in upper limbs muscle activity tended to increase in working chair compared with conventional task. Conclusion: Improvement for cushion in seat back and pan required to reduce discomfort in buttocks. Application: Overall findings verified that the working chair might help to prevent upper limb and lower back MSDs based on the current study. These results can be practically used for work improvement for the grapevine growers to prevent MSDs.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.

• Korean Journal of Social Welfare Studies
• /
• v.44 no.3
• /
• pp.323-346
• /
• 2013

The main purpose of this study is to analyze job sequences according to poverty profiles that the working poor have had. For the stated purpose, this study examines characteristics and patterns of job sequences by diving the subgroups, using the 10 year data of KLIPS and the sequence analysis. Major findings are as follows. The working-transient poor have different characteristics, such as longer working term, less job change, less number of gap and length, and relatively higher monthly income, from the working-recurrent poor and the working-persistent poor. However, there are no different characteristics between the working-recurrent poor and working-persistent poor, except for monthly income. Job sequences are divided into 5 clusters and job sequences types according to the working poor subgroups are quite different. Such analysis results would contribute to planning poverty policies based on job sequences differently seen in subgroups and finding specific policy alternatives to relieve the working poor.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.289-294
• /
• 2015

Background: The type of payment is one of the important factors that has an effect on the health of employees, as a basic working condition. In the conventional research field of occupational safety and health, only the physical, chemical, biological, and ergonomic factors are treated as the main hazardous factors. Managerial factors and basic working conditions such as working hours and the type of payment are neglected. This paper aimed to investigate the association of the type of payment and the exposure to the various hazardous factors as an heuristic study. Methods: The third Korean Working Conditions Survey (KWCS) by the Occupational Safety and Health Research Institute in 2011 was used for this study. Among the total sample of 50,032 economically active persons, 34,788 employees were considered for analysis. This study examined the relation between the three types of payment such as basic fixed salary and wage, piece rate, and extra payment for bad and dangerous working conditions and exposure to hazardous factors like vibration, noise, temperature, chemical contact, and working at very high speeds. Multivariate regression analysis was used to measure the effect of the type of payment on working hours exposed to hazards. Results: The result showed that the proportion of employees with a basic fixed salary was 94.5%, the proportion with piece rates was 38.6%, and the proportion who received extra payment for hazardous working conditions was 11.7%. Conclusion: The piece rate was associated with exposure to working with tight deadlines and stressful jobs. This study had some limitations because KWCS was a cross-sectional survey.

• Safety and Health at Work
• /
• v.12 no.3
• /
• pp.384-389
• /
• 2021

Background: Social distancing by working-from-home is an effective measure to decrease the spread of COVID-19. However, this new work pattern could also affect the well-being of workers. Therefore, the aim of the study was to study the magnitude of occupational health problems and lifestyle changes among workers who have only recently started working from home. Methods: A cross-sectional study was conducted using online self-administered questionnaires during the coronavirus disease 2019 pandemic in the Bangkok metropolitan area, Thailand. The participants were from any organization that allowed working from home. The demographic data including the analysis of the characteristics of working from home, the occurrence of occupational health problems, and the lifestyle changes caused by working from home were analyzed. Results: A total of 869 workers were included as study participants. The highest prevalence of physical health problems among all workers was identified to be weight gain at a rate of 40.97% (95% confidence interval = 37.69-44.24), and the highest prevalence of psychosocial problems was identified to be cabin fever at a rate of 31.28% (95% confidence interval = 26.66-35.90%) among full-time working-from-home workers. The health effects that were significantly related to the intensity of working from home (p for trends <0.05), either positively or negatively, included body weight changes, ergonomic problems, indoor environmental problems, and psychosocial problems. Meanwhile, the lifestyle changes related to work intensity included eating pattern, sleep habits, and exercise. Conclusions: Working from home can affect workers' well-being in various aspects. Hence, occupational health providers must prepare for risk prevention and health promotion in this "new normal" working life pattern and for future pandemics.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.8.1-8.12
• /
• 2023

Background: Prolonged use of visual display terminal (VDT) can cause eyestrain, dry eyes, blurred vision, double vision, headache and musculoskeletal symptoms (neck, shoulder, and wrist pain). VDT working hours among workers have greatly increased during the coronavirus disease 2019 (COVID-19) pandemic. Therefore, this study aimed to investigate the relationship between VDT working hours and headache/eyestrain in wage workers using data from the sixth Korean Working Conditions Survey (KWCS) (2020-2021) conducted during the COVID-19 pandemic. Methods: We analyzed the sixth KWCS data of 28,442 wage workers aged 15 years or older. The headache/eyestrain that occurred in the last year was assessed. The VDT work group included workers who use VDT always, almost always, and three-fourth of the working hours, while the non-VDT work group included workers who use VDT half of the working hours, one-fourth of the working hours, almost never, and never. To analyze the relationship between VDT working hours and headache/eyestrain, the odds ratios (ORs) and 95% confidence interval (CI) were calculated using logistic regression analysis. Results: Among the non-VDT work group, 14.4% workers experienced headache/eyestrain, whereas 27.5% workers of the VDT work group experienced these symptoms. For headache/eyestrain, the VDT work group showed adjusted OR of 1.94 (95% CI: 1.80-2.09), compared with the non-VDT work group, and the group that always used VDT showed adjusted OR of 2.54 (95% CI: 2.26-2.86), compared with the group that never used VDT. Conclusions: This study suggests that during the COVID-19 pandemic, as VDT working hours increased, the risk of headache/eyestrain increased for Korean wage workers.

• Journal of Information Technology Applications and Management
• /
• v.31 no.1
• /
• pp.177-188
• /
• 2024

In this research, a cohort of two children, aged 7-8 years, was selected to participate in a specialized three-week training program aimed at enhancing their working memory. The program consisted of three sessions, each lasting approximately 30 minutes. The primary goal was to investigate the impact and developmental trajectory of working memory in school-aged children. Working memory plays a significant role in young children's learning and daily activities. To address the needs of this demographic, products should offer both educational and enjoyable activities that engage working memory. Digital educational tools, known for their flexibility, are suitable for both older individuals and young children. By updating software or modifying content, these tools can be effectively repurposed for young learners without extensive hardware changes, making them both cost-effective and practical. For example, memory training games initially designed for older adults can be adapted for young children by altering images, music, or storylines. Furthermore, incorporating elements familiar to children, like animals, toys, or fairy tales, can increase their engagement in these activities. Historically, working memory capabilities have been assessed predominantly through traditional intelligence tests. However, recent research questions the adequacy of these behavioral measures in accurately detecting changes in working memory. To bridge this gap, the current study utilized electroencephalography (EEG) as a more sophisticated and precise tool for monitoring potential changes in working memory after the training. The research findings were revealing. Participants showed marked improvement in their performance on n-back tasks, a standard measure for evaluating working memory. This improvement post-training strongly supports the effectiveness of the training program. The results indicate that such targeted and structured training programs can significantly enhance the working memory abilities of children in this age group, providing promising implications for educational strategies and cognitive development interventions.