• 정보처리학회논문지C
• /
• 제16C권5호
• /
• pp.597-604
• /
• 2009

SMTP(Simple Mail Transfer Protocol) 서버는 네트워크를 기반으로 사용자의 메일을 전달 해주거나 저장하기 위해 만들어졌다. SMTP 서버는 대규모 서비스를 운영하거나 사용자가 많은 경우 또는 많은 양의 메일을 처리해야 하는 경우에는 SMTP 서버들을 복수로 구성할 수 있어야 한다. SMTP 서버의 메일 저장 공간인 파일시스템을 분리함으로써 복수의 SMTP 서버로 구성하는 것이 가능하며, 이때 분리된 파일시스템을 각각의 SMTP 서버들이 공유하기 위해 NFS(Network File System)를 사용하게 된다. 그러나 NFS는 네트워크 기반의 파일시스템으로써 파일시스템이 가지는 특성을 모두 가지고 있기 때문에, SMTP 서버들이 메일 저장 공간 공유를 위해 사용할 경우 불필요한 작업들로 인해 오버헤드가 발생하게 된다. 본 논문에서는 소켓(Socket)을 통해 직접 작업하는 방식을 사용하여 NFS를 사용함으로 인해 발생하는 작업 오버헤드를 줄이는 방식을 제안한다. NFS를 사용함으로 인해 발생하는 오버헤드를 최소화하기 위해 직접 소켓 작업을 할 수 있도록, 정보 기반의 저장 공간 구조 및 메일 저장을 위한 프로토콜을 정의하였다. 제안된 방식은 Netscape에서 만든 Mailstone을 이용하여 실험을 수행하였고, 실험을 통하여 제안된 방식이 기존 방식에 비해 성능이 향상되었음을 확인하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.37-54
• /
• 2016

The methods for estimating the change of free energy in dissipative particle dynamics (DPD) are discussed on the basis of fluctuation theorems. Fluctuation theorems are tactics to evaluate free energy changes from non-equilibrium work distributions and have several forms, as proposed by Jarzynski, Crooks, and Bennett. The validity of these methods however, has been shown merely with the molecular dynamics or Langevin dynamics. In this study, the appropriate forms of fluctuation theorems for dissipative particle dynamics, which has similar structure to that of Langevin dynamics, are suggested using Liouville's theorem, and they are proved equivalent to original fluctuation theorems. Work distribution functions, which are probability distribution functions of works exerted on the system within the systematic change, are the basics of fluctuation theorems and their shapes are turned out to be dependent on the phase space trajectory of the change of the system. The reliability of Jarzynski and Crooks methods is highly dependent on the number of simulations to measure works and the shapes of the work distribution functions. Bennett method, however, can evaluate free energy changes even when Jarzynski and Crooks methods fail to do so.

• 한국실내디자인학회논문집
• /
• 제25권2호
• /
• pp.163-174
• /
• 2016

The purpose of this study is to reveal the space composition of fireplace and common features of both Prairie and Usonian House found within Wingspread House. This house is the last and largest Prairie house and zoned house built in a Usonian period. However, this house is not an independent work, but rather Wright's evolutionary experiments of fireplace from his early works and his pursuit of Usonian ideal. This paper can be summarized as follows: 1) Living room has been transformed to allow spatial continuity towards exterior view and access and between neighboring rooms by removing doors and inglenook. At the Wingspread house Wright has introduced a freestanding fireplace in a living room with higher and prominent roof structure, therefore the space became a focal point as well as the central space of the entire house. 2) Wingspread and Coonley house have gallery space in common, but they have different settings in the living room composition. Also the living room and gallery space of Wingspread and Usonian houses have prospect and refuge principle by expansion and compression. 3) Wingspread house is a successful combination of Prairie and Usonian style to meet client's requirements in space composition and Wright's technology and economical experiments. This study is intended to reevaluate the significance of this house bridging his two great residential periods.

• 한국초등과학교육학회지:초등과학교육
• /
• 제37권3호
• /
• pp.309-322
• /
• 2018

There is no doubt that science -and, therefore, science education- is central to the lives of all (NGSS, 2013). This manuscript focuses on ideas in astronomy that are at the foundation of elementary students' understanding of the discipline: the apparent motion of the sun explaining the day / night cycle on Earth. According to prior research demonstrating that neither children nor adults hold a scientific understanding of the big ideas of astronomy (NRC, 1996), understanding of concepts may base students' progress towards more advanced understanding in the domain of astronomy. We have analyzed the logic of the domain and synthesized prior research assessing children's spatial representation from an earth- and a space based perspective to develop a set of learning trajectories that describe how students' initial ideas about apparent celestial motion as they take school science can be build upon. In this study elementary students' representations were compared by their resident context including urban and rural. This study may present a first look at the use of a learning progression framework in analyzing the structure of astronomy education. We discuss how this work may eventually lead towards the development and empirical testing of how children learn to describe and explain apparent patterns of celestial motion.

• 한국디지털건축인테리어학회논문집
• /
• 제9권3호
• /
• pp.85-93
• /
• 2009

In this study, the ex-formal expressions observed in space form of Korean modern architecture are distributed for characteristic analysis based on the period and type. The result of the study is certified by the work analysis and the result is as follows. Initially, due to the limited materials and influence of western brutalism, the works developed during 1960~70 tend to be plastic and contain expressionism. Around 1980's, the works tend to show forms of amusement and popularity. In 1990's the works show significance in deconstructive expression. From after 2000, ecological concept of architecture was introduced and organic expression started increasing Secondly, the ex-formal expressions are found to be in four different types. The organic expression is shown regardless of the period. In modern days, not only the physical properties of materials, but also the ecological concept is combined with the organic expression and is in increase. The plural expression started appearing after the 1980's and the sculptural diversity is enhancing with the addition of decorative factors or modification of geometrical form. The ex-construction and deconstructive expression show significance in some characteristics such as folding, inclination, and geometrical explosion. The free form and nonlinear expression tend to increase dramatically based on the development of structure technology as well as execution and introduce of the digital design technique.

• KIEAE Journal
• /
• 제12권6호
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

• 한국지반신소재학회논문집
• /
• 제20권4호
• /
• pp.113-124
• /
• 2021

도시화 및 경제성장에 따라 기존 매립지 등 기피 시설로 인식되어 있는 지상 환경기초시설 및 에너지생산 시설의 지하화가 중요한 사회적 이슈로 대두되고 있다. 대규모 플랜트 시설을 지하에 안전하게 건설하기 위해서는 제한적인 공간 레이아웃의 활용성을 높이고, 불필요한 기둥을 최소화해야 한다. 본 논문에서는 플랜트 시설을 지하화 할 경우 발생하는 작업의 제약여건, 조립 및 철거, 공정 계통의 연계성, 유지 보수 등의 문제를 해결하기 위하여 플랜트 모듈화 공법(파이프랙)에 대해 검토하였다. 복합플랜트의 지하 고집적 배치, 공간 레이아웃 활용성 향상 및 구조물 안정성 확보를 위해 다양한 하중조건(지진하중, 장치하중, 토압하중 등)을 적용한 플랜트 모듈 해석을 수행하였다. 또한, 작용하중과 부재가 견딜 수 있는 설계강도비 값을 검토하고 모듈 형상에 따른 안정성을 고려한 파이프랙 소재를 추출하였다. 다양한 경계조건에서의 해석 결과를 바탕으로 지하복합플랜트 건설 시 필요한 기본모듈의 최소 설치 간격 및 모듈 배치(안)에 관한 시사점을 도출하였다.

• 천문학회보
• /
• 제39권1호
• /
• pp.70.2-70.2
• /
• 2014

We developed a three-dimensional (3D) magnetohydrodynamic (MHD) simulation code to reproduce the structure of a solar wind and the propagation of a coronal mass ejection (CME) through it. This code is constructed by a finite volume method based on a total variation diminishing (TVD) scheme using an unstructured grid system (Tanaka 1994). The grid system can avoid the singularity arising in the spherical coordinate system. In this study, we made an improvement of the code focused on the propagation of a CME through a solar wind, which extends a previous work done by Nakamizo et al. (2009). We first reconstructed a solar wind in a steady state from physical values obtained at 50 solar radii away from the Sun via an MHD tomography applied to interplanetary scintillation (IPS) data (Hayashi et al. 2003). We selected CR2057 and inserted a spheromak-type CME (Kataoka et al. 2009) into a reconstructed solar wind. As a result, we found that our simulation well captures the velocity, temperature and density profiles of an observed solar wind. Furthermore, we successfully reproduce the general characteristics of an interplanetary coronal mass ejection (ICME) obtained by the Helios 1/2 spacecraft (R. J. FORSYTH et al. 2006).

• 한국실내디자인학회논문집
• /
• 제26권1호
• /
• pp.91-100
• /
• 2017

This study aims to comparatively analyze the characteristics of light expression shown in the exhibition spaces of architects Richard Meier and Kuma Kengo, who constructed the element of invisible light into visible forms within space, using diverse techniques and components. As for the methodology therefor, it was attempted to conduct theoretical consideration of light, to experience the spaces of light by producing diverse spaces with architectural space components, that is, space, form, material, structure, and color, and to find out what space characteristics are perceived by perceivers from the interaction of the components. As for the research scope, this study intended to identify the concepts and characteristics of light and compare light in spaces, focusing on works of Richard Meier who constructed functional and mechanical spaces based on Le Corbusier's architectural language in the West and works of Kuma Kengo who claimed regionalism architecture in the East. In particular, this study intended to comparatively analyze the methods of using materials according to the filtering of light that appears different between the two architects in case that light enters into their exhibition spaces, and the effects of light production that arise from the differences, thereby pointing out the characteristics of diverse light expressions within the spaces of modern architecture. On this, this study investigated methodological differences of the two architects, who are based on East and West thoughts, in expressing light in spaces in various forms through brightness and darkness, light transmission and shadows appearing according to the nature of light, and color and materials. It is hoped that this study will provide an opportunity for promoting better understanding about other architectural cultures as well as understanding the characteristics of light in exhibition spaces.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.501-517
• /
• 2016

Synchronized switch damping (SSD) is a structural vibration control technique in which a piezoelectric patch attached to or embedded into the structure is connected to or disconnected from the shunt circuit in order to dissipate the vibration energy of the host structure. The switching process is performed by a digital signal processor (DSP) which detects the displacement extrema and generates a command to operate the switch in synchronous with the structure motion. Recently, autonomous SSD techniques have emerged in which the work of DSP is taken up by a low pass filter, thus making the whole system autonomous or self-powered. The control performance of the previous autonomous SSD techniques heavily relied on the electrical quality factor of the shunt circuit which limited their damping performance. Thus in order to reduce the influence of the electrical quality factor on the damping performance, a new autonomous SSD technique is proposed in this paper in which a negative capacitor is used along with the inductor in the shunt circuit. Only a negative capacitor could also be used instead of inductor but it caused saturation of negative capacitor in the absence of an inductor due to high current generated during the switching process. The presence of inductor in the shunt circuit of negative capacitor limits the amount of current supplied by the negative capacitance, thus improving the damping performance. In order to judge the control performance of proposed autonomous SSDNCI, a comparison is made between the autonomous SSDI, autonomous SSDNC and autonomous SSDNCI techniques for the control of an aluminum cantilever beam subjected to both single mode and multimode excitation. A value of negative capacitance slightly greater than the piezoelectric patch capacitance gave the optimum damping results. Experiment results confirmed the effectiveness of the proposed autonomous SSDNCI technique as compared to the previous techniques. Some limitations and drawbacks of the proposed technique are also discussed.