• Journal of Korean Elementary Science Education
• /
• v.21 no.1
• /
• pp.111-125
• /
• 2002

The aim of this study is to make it sure how pupils' science inquiry skills and attitude are influenced when they are taught by using the work-sheets for the differentiated learning according to their ability. In order to accomplish this aim, two classes of the fourth grade in the elementary school were distinguished into two groups: one was the experimental class and the other, the comparative class. The experimental class was given 52 hours of science lessons using the above sheets, and the comparative class, the general method of teaching. In order to compare their scientific interest and learning ability of the two groups each other, pupils were tested the standardized achievement in advance. The two groups were also given "ex post facto test" to measure the variation of their inquiry skills and attitude after the lessons. In addition, the experimental class was tested to measure their learning attitude after they are teamed the science with the sheets. The results of this study are as follows: 1. According to the percentile statistics of the science inquiry skills test between the two groups, the work-sheets for the differentiated teaming helped pupils develope their inquiry skills remarkably. 2. The work-sheets did not lead to significant difference between the learning ability of boys and girls. 3. The science lesson using the work-sheets showed positive influences in increasing pupils' scientific attitude. 4. About 77.2 percent of pupils accepted the excellent records of the evaluation in the science lesson using the sheets. It can be, therefore, concluded that the science lesson using the work-sheets for differentiated teaming is one of effective science lessons to increasing pupils' science inquiry skills, compared with the general teaching method.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.501-504
• /
• 2006

The estimation of the work of heart can be treated as one of the most important parameters for determining the amount of circulating blood needed for harmonious metabolism in the human body. By monitoring the work of heart, one can detect increased work load of heart and start the treatment at the early stage of CHF. Thus it is necessary to estimate the work of heart. The contractility of the left ventricle, the second important parameter for representing the motion of heart, can be estimated through information on the work of heart. In this study, the modified Windkessel model, which has been used for a measure of vascular hemodynamic impedance parameters, was adapted to estimate the work of heart.

• Asia pacific journal of information systems
• /
• v.9 no.3
• /
• pp.127-142
• /
• 1999

There have been strong arguments that the best organizational type for the information society is a network organization which is intelligent and learning-oriented as well as has problem solving capacities rather than a traditional passive organization which strictly follows standard operating procedures. In this perspective, integrated information work environment emerges as attractive work environment for the 21st century. Integrated information work environment is defined as an integrated electronic environment that is available to and readily accessible be each employee and is structured to provide immediate, individualized on-line access to the full range of information, software, guidance, advice and assistance, data, images, tools, and assessment and monitoring systems to permit job performance with minimal support and intervention by others. Case study was performed to measure the productivity improvement by implementing integrated information work environment in life insurance company. The results show that there is a number of indications of strong work productivity improvements.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.43-46
• /
• 2011

The work plate in a construction sites is a frequent cause of falling. But the bulk of the work plates lent to the construction site are handled carelessly by workers. There is general concern about performance declining by repetitive use. However, there is not a accurate guide, research and study on reuse work plate. This study was conducted in order to judge the classification guide to reuse work plate and measure the performance of classified reuse work plates. It is the result that even the A-grade plates classified to be in good shape by workers are below the performance standard. This means that the guide and classification are ineffective.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.423-432
• /
• 2014

Objective and Background: The objective of this study was to evaluate the association of individual characteristics, work-related factors, lifestyle factors, and health problems with work ability among aging workers in Korea. Method: In this cross-sectional survey, the study population consisted of 1,594 workers who had participated in a voluntary health promotion center and private workplace. Participants completed the work ability index. Results: The mean WAI score was 37.4, while the mean age of the sample was 43.25. In the age group over 50 showed 36.26. The majority of participants rated their work ability as 'good' to 'excellent', one-third moderate and about 7.5% poor. Work ability decreased significantly with age among the men. The younger group had higher scores on the work ability index than the age group over 50, except for mental resources. By work characteristics, work ability was analyzed to be the lowest in the case of work handling heavy stuff. Lastly, as a result of health factors analysis, the good management and retention of current health status can be the measure helpful to the improvement of work ability. Conclusion and Application: According to the results, it can be a basic principle to devise and enforce preventive measures on the factors for which improvement or action is possible, together with workplace-level systematic approach, in order to improve work ability. For such measures to be realized, it is necessary to check trends in change for several years.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.158-165
• /
• 2018

Objectives: We analyzed the problems that work environment measurement results don't lead to workplace improvement in the Work Environment Measurement System to propose an alternative. Methods: We reviewed reports and articles written by the Korea Occupational Safety and Health Agency and academic circles to identify the problems in the current Work Environment Measurement System and suggest an alternative. Results: One of the reasons that the Work Environment Measurement has not resulted in workplace improvement is that there were no proper regulating systems for managing the workplace improvement plans or improvement results. Moreover, there are not enough professional manpower in ministry of labor to evaluate the improvement plans and results from the Work Environment Measurement. Therefore, all of the workplace whose Work Environment Measurement results exceed the occupational exposure limit (OEL) should be managed by regional ministry of labor, and outside experts and new system for verifying improvement are needed. Conclusions: To accomplish the purpose of Work Environment Measurement, it is necessary to improve the work environment according to the results of Work Environment Measure. For this, it is necessary for the government to manage the fulfillment of workplace improvement plans and for measurement agencies to secure expertise.

• Journal of the Korean Professional Engineers Association
• /
• v.16 no.1
• /
• pp.13-19
• /
• 1983

As one of staff members participated in the full course of the plant construction project of On-san Refinery to its successful completion. I had my past expierence that the plant construction project was so complicated, and a Long period required, and thus there were so money problems to be solved. Among the problem, I mainly noticed that the following listed points were solved and improved. 1. Each drawing should be in every accuracy possible. 2. Contract should be specified in every detail possible. 3. All invoiced prices of breack down list should be coped with the current market prices. 4. All execution of work should be in the most accuracy. A. Planing execution of work. B. Coordination with supervisor group. C. Economical method for execution of work. D. Safety control. 3, Calculation work field should be established seperately 6. Each staff members should be work at the best of his pride.

• Journal of the Korea Furniture Society
• /
• v.19 no.5
• /
• pp.350-357
• /
• 2008

This research investigates the bending properties to predict the work-energy to maximum load and impact bending energy from static bending and impact bending test. Specimens were prepared from lumber made of thinning crop-trees. Matched specimens were used for MC 12% and green moisture specimens to measure the effect of moisture content on the absorbed energy from static and impact bending tests. The bending properties such as MOE, MOR, etc. is a good predictor to investigate the work-energy and work-energy per unit volume from static bending and impact bending test. The impact bending energy is increased with increasing moisture content. However, the work to maximum load from static bending test is increasing with increasing the MC only for higher density species.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.834-837
• /
• 2005

In this paper, we describe the method of non-invasive blood pressure measurement using pulse wave transit time(PWTT). PWTT is a new parameter involved with a vascular that can indicate the change of BP. PWTT is measured by continuous monitoring of ECG and pulse wave. No additional sensors or modules are required. In many cases, the change of PWTT correlates with the change of BP. We measure pulse wave using the photo plethysmograph(PPG) sensor in an earlobe and we measure ECG using the ECG monitoring device our made in the chest. The measurement device for detecting pulse wave consists of infrared LED for transmitted light illumination, pin photodiode as light detector, amplifier and filter. We composed 0.5Hz high pass, 60Hz notch and 10Hz low pass filter. ECG measurement device consists of multiplexer, amplifier, filter, micro-controller and RF module. After amplification and filtering, ECG signal and pulse wave is fed through micro-controller. We performed the initial work towards the development of ambulatory BP monitoring system using PWTT. An earlobe is suitable place to measure PPG signal without the restraint in daily work. From the results, we can know that the dependence of PWTT on BP is almost linear and it is possible to monitoring an individual BP continuously after the individual calibration.

• Journal of muscle and joint health
• /
• v.27 no.3
• /
• pp.247-254
• /
• 2020

Purpose: This was a descriptive observational study examining the reasons for, frequency of, and factors affecting work interruption among intensive care unit (ICU) nurses. Methods: Convenience sampling was used to recruit 46 regular nurses who had been working in an ICU at D tertiary hospital in B metropolitan city for at least six months. To measure the degree of work interruption, this study revised a tool used by Brixey et al. (2007) for analyzing the type of work interruption. Results: A total of 1,787 work interruptions occurred during 368 hours of observation, i.e., at an average of 4.85 times per hour. Communication-related factors caused work interruption most frequently, followed by environmental, work-related, and personal factors. As for the work-related characteristics of nurses, participants experienced work interruption more frequently while working on weekdays, when the medical staff were stationed, than on weekends. Conclusion: ICU nurses experienced work interruption frequently. With the health care system expected to become more complicated in the future, efforts should be made to reduce unnecessary work interruptions to improve the operation efficiency of ICUs.