• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.47-54
• /
• 2008

To make up original defects of the wooden materials for decks, and to supply the wooden material for outdoor, we fabricated preservative treated plywood(PTP). Copper azole (CUAZ-1) preservative was treated with a normal full-cell process. Bond Strength of PTP was not affected after the preservative treatment. The anti-fungal efficiency and dimensional stability were obtained from PTP. A little discoloration of the surface was detected, but the dimensional change or peel bonded area off were not observed after accelerated weathering test. Although some strength of PTP was reduced after 17 months of field exposure, the PTP should be applicable for outdoor applications.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.21-24
• /
• 1999

The analysis of hazard compounds, including naphthalene, biphenyls (BP) and diethyl phthalate (DEP), was conducted from the wooden kitchenwares and sanitory produce. Fifty samples of that wooden products in the local market were purchased for the study. All the samples were extracted by benzene and n-heptane, followed by the analysis through GC-MSD. As a result, neither naphthalene nor diethyl phthalate were found, however, trace amount of biphenyls were detected on all the samples ranged from 0.1 to 3.1 ppm. Biphenyls also contained both in the imported and the domestic of White Birch wood, as 0.25 ppm and 0.34 ppm, respectively. The concentration of biphenyls reduced with the process of the original woods, and especially the detection range was relatively low compared with the permission one of apples (110 ppm). The results suggested that biphenyls were contaminated into the product not by the addition doting the process of manufacture, but as the component itself in raw wood materials. Also, the content of the residual biphenyls were not suspected to give the harmful effects.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.95-107
• /
• 1999

The design models of a new product in general are created using clay models or wooden mock-ups. The reverse engineering(RE) technology enables us to quickly create the CAD model of the new product by capturing the surface of the model using laser digitizers or coordinate measuring machines. Rapid prototyping (RP) is another technology that can reduce the product development time by fabricating the physical prototype of a part using a layered manufacturing technique. In reverse engineering process, however, the digitizer generates an enormous amount of point data, and it is time consuming and also inefficient to create surfaces out of these data. In addition, the surfacing operation takes a great deal of time and skill and becomes a bottleneck. In rapid prototyping, a faceted model called STL file has been the industry standard for providing the CAD input to RP machines. It approximates the CAD model of a part using many planar triangular patches and has drawbacks. A novel procedure that overcomes these problems and integrates RE with RP is proposed. Algorithms that drastically reduce the point clouds data have been developed. These methods will facilitate the use of reverse engineered geometric data for rapid prototyping, and thereby will contribute in reducing the product development time.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.309-317
• /
• 2014

Harvested wood products (HWP) are known as products from the tree such as sawn wood, plywood, particle board, structural lumber, wooden interior material, wooden furniture, and paper products. Because carbon is locked up in the HWP until eventual end-use of HWP, HWP played a role as the carbon storage which has the effect of stabilizing the concentration of carbon dioxide in the atmosphere. For these reasons, the suggestion that it must admit the carbon storage effect of HWP has been constantly raised. In 2011, the 17th session of the Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change (UNFCCC) which was held in Durban, South Africa, assigned "Production Approach" which targets only the HWP producted by using round wood of domestic forestry as a official method for carbon accounting. Therefore, it is necessary that each country has to determine the half-life of wood in order to correspond to the discussions and negotiations between countries in the future and to develop an inventory of product-specific domestic wood. In this study, some countries' examples of the methods and conditions for determining half-life of HWP were investigated, and it was tried to derive the factor and methodology to determine half-life span of domestic HWP appropriately.

• Journal of the Korea Furniture Society
• /
• v.25 no.2
• /
• pp.79-86
• /
• 2014

Furniture can be a product of design and is considered a form of a decorative art. Architectural works are often perceived as cultural symbols and as works of art. Korean traditional architectural form and wooden furniture were improved by adding up an organic coordination in the interior space. Furniture adds beauty of life by being coordinated with the interior space with its particular characteristic in the form of architectural structure. Architecture and furniture are also being improved in a more natural and diverse way. Therefore, in this research, from the choice of the location, Korean traditional architecture is considered to be coordinated with the nature, and the technical skill is lessened to express its beauty. There is a presence of elegance yet robust combination of simplicity and beauty. In addition, the traditional architecture and wooden furniture are completely expressed structurally with coordination of the outstanding design and solid structure according to the thrifty living in the Confucian ideas which influenced the Korean traditional society. The representative of Korean traditional architecture, Baeheulrim pillar, has worked as motive because of its visual comfort caused by optical illusion and formative elements. The small portable dining table (Soban) which reflects the characteristic of Korean unique tradition and the sensitivity of Koreans has been reinterpreted through the motive in this research. As a result, it has shown the possibility as the design element to change the aesthetic structure. In the modern society, cultural identity plays a vital role. Therefore, this research can be used as reference for the new concept of furniture - making. It could be a combination of modern people, lifestyle and living space by creating the Korean image suitable for the modern society.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.155-164
• /
• 2005

In contrast with product design field, some designers who work in furniture field tend to do their own studio works as well as typical designing part. Especially in the small furniture studios for the limited quantity batch production, custom made or handmade craft furniture which is finished with high quality, the propensity for their own production is more obvious than in the big furniture companies in this case. In this kind of small-scale furniture studios, they have more chance to create the various formative works and 'curved shape' is one of the most important elements to form creative pieces. Except by caning, it is very difficult to make curved wooden shape because of own characteristic of wood. Therefore, the special techniques of bending wood are essential to formative furniture production and vacuum press system is introduced as a main subject for the bending wood method in this study. Especially for the designers who work as makers as well at the small furniture studios, the value of vacuum press system on efficiency and productivity of work was sought by testing and improving the method of wood bending techniques. According to this practical searching, ideally sufficient condition on vacuum pressing work was founded as a result on this study.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.135-140
• /
• 2007

In this study we settled the trouble of the MgO board of existence by this research. We changed the wooden one of the main ingredient of a board to a perlite and a mineral particle in the aluminum hydroxide group and proceeded with a study to physical character and fire resistance efficiency improvement. The result yellowing phenomenon could be improved and it was possible to reduce size decrease of pin hole and the frequency of occurrence. We found out that the in case of absorbed amount added 5~8% corresponding to the weight decreases the acrylic group emulsion suddenly. So this product is improved with the bending strength and water-resistance. After behavior stop time measurement of a mouse for experiments was measured at the time of a gas harmful effect test, an improved MgO board appeared more highly for an average of 138 seconds compared with a board of existence.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.32-38
• /
• 1994

The methods in wood processing are so limited at present that a scope of its utilization is restricted. This often makes wood itself less valuable as a material comparing with other materials, that is, plastics, metals, and glass. Such differences are due to a lack of plasticity in wood, i.e. it cannot be melted, dissolved, or softened sufficiently for molding. However, once plastic properties are added to wood, it becomes more useful material. This further broadens the method in wood processing to a variety of fields. In this way, wooden material which is limited in use can be modified into a high quality product with additional value. Furthermore, utilization of wastes from wood, for example, would be made viable. In this study, thermoplasticization was carried out by benzylation of wood(sawdust). Various factors those affect the reaction were tested to produce benzylated wood with different degrees of substitution. Reaction temperature and time were the quite important factors. Optimum reaction temperature was 110$^{\circ}C$, and weight percent gains(WPG) of final products increased gradually with the increase of reaction time. The pretreatment (or preswelling) of wood with alkaline solution had a critical effect on benzylation. and the concentration of alkaline solution should be above 30% to obtain high weight percent gain. The thermal flow temperature of the benzylated wood decreased with the increase in weight percent gain, that of 80% weight percent gain is about 200$^{\circ}C$.

• The Korea Journal of Herbology
• /
• v.34 no.1
• /
• pp.33-42
• /
• 2019

Objectives : This study aimed to be used as basic data for obtaining excellent quality of Salvia miltiorrhiza (SM) root. Methods : SM cultivated in Anhui Bozou, Henan, Shandong, Henan Wenxian, Zhejiang, Hebei, Liaoning, Shanxi, Shaanxi Shangluo, Sichuan Zhongjiang, Sichuan Minyang and Jiangsu in China were gathered and its internal morphology and physicochemical patterns were analyzed. Results : Cross-section of sang plants according to cultivated regions in China showed that cork layers consisted of cells with four to six layers, cortex width was wide, and phloem was semilunar-shaped. Although there are forms layers, yet boundary was vague. It was observed that eight to ten vascular bundles were arranged in wooden parts in all directions and as a single line of vascular was distributed nearby form layers as it nears to the center. Tanshinon IIA identified a spot in the same location with standard product near by Rf 0.9 in the test identifying TLC of SM according to cultivated areas in China. The largest amount was 0.535% identified in Shandong and the lowest amount of 0.05% in Hebei. Salvianolic acid B identified a spot in the same location with standard product near by Rf 0.7 in the test identifying TLC of SM according to cultivated areas in China. The largest amount was 2.72% identified in Liaoning and the lowest amount of 0.825% in Jiangsu. Conclusions : The results are assumed to be used as basic data for obtaining excellent quality of SM oriental medical hers and distinguishing authentic or fake herbs.

• Journal of the Korea Furniture Society
• /
• v.26 no.1
• /
• pp.22-30
• /
• 2015

In order to prevent decay, distortion, bending, twist on wood products such as wooden furnitures, variety of coating materials were developed and used so far. The coating materials for wood finishing can be synthesized by natural resource or petroleum. However, these coating materials can cause contamination of indoor air quality due to emission of volatile organic compounds (VOCs). In this study, commercialized coating materials for wood finishing such as varnish, coat, and stain were evaluated on emission characteristics of VOCs. Among the varnish, eco-friendly products had about 15~46% lower TVOC emission ($1,042{\mu}g/m^2h{\sim}3,257{\mu}g/m^2h$, respectively, than typical product ($7,100{\mu}g/m^2h$). Natural resource based coating material showed lowest TVOC emission level. However, one of natural resource based waterborne stain showed higher TVOC emission level because waterborne stain already contained higher amount of natural VOC. Oil-based stain might not be suitable for indoor use on interior wall and furniture due to exceed amount of TVOC. Based on results, natural resource based coat or waterborne stain are recommenced to use on wood products.