• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.62-69
• /
• 2000

The bark of ash(Fraxinus rhynchophylla) and elm(Ulmus davidiana var. japonica) trees were collected, extracted with acetone-$H_2O$(7:3, v/v), fractionated with hexane, chloroform and ethylacetate, and freeze dried to give some dark brown powder. Each fraction of the powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The ash bark contained a large amount of coumarin derivatives such as aesculetin and aesculin in addition to trace amount of ligstroside and oleuropein. Most of the elm bark extractive were (+)-catechin and its glycosides such as (+)-catechin-7-O-xylopyranose and (+)-catechin-7-O-apiofuranose in addition to a small amount of procyanidin B-3, a dimeric (+)-catechin. NMR and FAB-MS spectrometric analyses were performed to characterize the structures of isolated phenolic compounds.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.160-167
• /
• 2015

The reduction of energy consumption in papermaking process has been considered as one of the major issue in the paper technology. The energy efficiency of paper mill becomes more significant for the mill which manufacture the board grade products such as linerboard with recycled paper such as OCC. The application of lignocellulose spacer to the board grade paper stock would be the feasible solution by increasing the paper bulk and the drying efficiency. The major defects originated from the application of the lignocellulose spacer could be the loss of strength properties. In this study, the ways for improving the strength properties of the spacer-added linerboard were suggested and evaluated. The effects of the addition of various types polyelectrolytes were tested and the different methods of polyelectrolytes were applied for finding the efficient way. The pretreatments of lignocellulose spacer with the polyelectrolytes during wood spacer hydration resulted in the higher strength properties than the typical application method such as the addition to the mixed stock. Multilayer treatments of the spacer with polyelectrolytes were also evaluated and leaded to the higher strength properties with the similar bulk improvement.

• Biomolecules & Therapeutics
• /
• v.13 no.2
• /
• pp.107-112
• /
• 2005

Excessive drinking causes 'alcohol hangover' within 8-16 hours. The cause of 'hangover' has not been elucidated exactly until now, but it is reported that it is caused by the creation of blood ethanol and acetaldehyde as ethanol metabolites. In this study vinegar extract of wood (VE) or OC-1, to which the powder extract of green tea leaves extract is added, was administered to the rats 30 minutes before the oral administration of ethanol (3 g/kg) and the blood ethanol and acetaldehyde concentration was measured in order to evaluate the efficacy of the beverage material for detoxification. As a result, the blood ethanol concentration in the group of the VE-1(vinegar crude extract) and VE-2 (double diluted solution) is statistically lower (P,0.05) than the exclusive alcohol administered control group. The blood acetaldehyde concentration of all groups of VE and OC-2, which is the double dilution of OC-1, is statistically low after 7 hours following ethanol administration. Especially, the AUC value of OC-2 group is statistically low compared to the control group. Accordingly, it indicates the conclusion that VE and OC-1, reducing the blood ethanol and acetaldehyde concentration which are two leading factors of 'hangover' after drinking, and worthwhile to be developed as beverage materials to eliminate 'hangover'.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.53-59
• /
• 2001

The needles of torreya(Torreya nucifera S. et Z) were collected, extracted with acetone-$H_2O$(7:3, v/v), fractionated with hexane, chloroform and ethylacetate, and freeze dried to give some dark brown powder. The ethylacetate soluble mixture was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. Most of the needle extractives were flavan and its methyl ether compounds such as (+)-catechin, (-)-epicatechin, (+)-gallocatechin, (-)-epigallocatechin, 3'-O-methyl-(+)-catechin and 3'-O-methyl-(-)-epicatechin including protocatechuic acid, one of benzoic acids. $^1H$- and $^{13}C$-NMR, NOE and CI-MS analyses were performed to elucidate the structures of the isolated compounds.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.25-31
• /
• 2000

Low-density polyethylene (LDPE) powder was investigated as a hydrophobic additive component in particleboard (PB). PBs were manufactured using southern pine particles with a liquid phenolic resin binder at two press temperatures. LDPE at three application rates was used. PBs were tested for physical properties and water soak dimensional stability per the procedure ASTM D 1037. The results indicated that as the LDPE addition level and hot-press temperature were increased, the panel water absorption and thickness swell values decreased. However, the panel's physical properties were affected negatively by increased LDPE application rates. These results indicated that LDPE could be used only in limited amounts to improve the panel's water soak dimensional properties.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.138-147
• /
• 2010

Nematicidal activity against pine wood nematode, Bursaphelenchus xylophilus, was tested in the pot and field by the treatment of microbial formulation after media optimization. The optimized media composition was glycerol 10 g, soybean meal 10 g, NaCl 1 g, $CaCO_3$ 2 g, $K_2HPO_4$ 0.125 g per liter and microbial complex formulation was made with liquid and powder type. Most effective antibiotics against symbiotic microorganism with nematode, kanamycin, was added to the formulation. The control effects against pine wood nematodes were checked by pot test and field test. In the result of treatment by trunk injection, five times treatment was more effective than one time and the treatment with the formulation of concentrated culture supernatant was the most effective in the nematicidal activity showing below 10% mortality in pine tree.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.58-66
• /
• 2007

The objective of this research was to develop environment-friendly adhesives for face fancy veneer bonding of engineered flooring. Urea-formaldehyde (UF)-tannin and melamine-formaldehyde (MF)/PVAc hybrid resin were used to replace UF resin in the formaldehyde-based resin system in order to reduce formaldehyde and volatile organic compound (VOC) emissions from the adhesives used between plywoods and fancy veneers. Wattle tannin powder (5 wt%) was added to UF resin and PVAc (30 wt%) to MF resin. These adhesive systems showed better bonding than commercial UF resin with a similar level of wood penetration. The initial adhesion strength was sufficient to be maintained within the optimum initial tack range. The standard formaldehyde emission test (desiccator method) and VOC analyzer were used to determine the formaldehyde and VOC emissions from engineered flooring bonded with commercial UF resin, UF-tannin and MF/PVAc hybrid resin. By desiccator method, the formaldehyde emission level of UF resin showed the highest but was reduced by replacing with UF-tannin and MF/PVAc hybrid resin. MF/PVAc hybrid satisfied the $E_1$ grade (below $1.5mg/{\ell}$). VOC emission results by VOC analyzer were similar with the formaldehyde emission results. TVOC emission was in the following order: UF > UF-tannin > MF/PVAc hybrid resin.

• Journal of Korea Foresty Energy
• /
• v.24 no.2
• /
• pp.16-23
• /
• 2005

The air dried of Epimedium koreanum Nakai was extracted with MeOH and its extractives were concentrated with a vacuum evaporator. The extractives were fractionated with a series of n-hexane, chloroform (${CHCl}_3$), butanol (BuOH), ethyl acetate (EtOAc) and water on a separately funnel. Each fraction was freeze dried to give some dark brown powder. The EtOAc and BuOH soluble fractions were chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-n-hexane mixture as eluents. The isolated compounds were tested with a cellulose TLC developed with TBA and 6% acetic acid and then visualized on UV lamp or sprayed with vanillin-HCl-EtOH. The purified compounds were flavonoids and their glycosides, and organic acid as follows : (+)-catechin, icariin, hyperoside, Ikarisoside A and caffeic acid. The structures of each compounds were confirmed by $^1H-NMR,\;^{13}C-NMR$ and Mass spectra. Also, executed qualitative analysis as use GC/MS(Libraries search) about ${CHCl}_3$ soluble compounds of each part.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.334-344
• /
• 2023

Dregs from the sugar palm (Arenga pinnata) starch industry are considered a waste product of the agricultural industry and have not yet been optimally utilized. Therefore, this study aimed to manufacture particleboards from dregs using different amounts of adhesive and particle size ratios. Sugar palm dregs, which had been separated into fibers and powder/fine particles, were used as raw material for making particleboards. The fiber had an average length of 6.84 ± 3.23 cm, while the fine particles were of a size that passed through size 10 mesh and remained in size 60 mesh. Three ratios of fiber to fine particles (100:0, 75:25, and 50:50 wt%) with three different amounts of sucrose-citric acid adhesive (10, 15, and 20 wt%) were used in this study. Increasing the amount of fine particles and the resin content can improve the physical properties and the internal bond strength of boards made from sugar palm dregs. The fine particles possibly filled the gap between the fibers in the particleboard, while the fibers exhibited a high bending strength. As a result, a high-performance particleboard can be attained by combining the composition ratio of fiber/fine particles and resin content. In this study, particleboards made from fiber/fine particles (75:25 wt%) and adhesive content of 15 wt% and 20 wt% had the mechanical properties that met the requirements of Japanese Industrial Standard (JIS) A 5908 type 18. Sugar palm dregs have the potential to be used as raw materials to create value-added particleboards.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.1-12
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Liriodendron tulipifera, Betula costata, Paulownia coreana were examined on sorption property, thermal property, electric property, acoustic property. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 80 mesh wood powder and resulted in their EMC's and sorption isotherms. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences of the thermal and electric properties between quarter-and flat-sawn specimens were observed, which was partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and acoustic properties of wood.