• 펄프종이기술
• /
• 제30권3호
• /
• pp.15-21
• /
• 1998

Crude enzymes of Trichoderma viride and Phanerochaete chrysosporium were evaluated for their effect to brightness and physical properties of recycled pulp from newspaper and corrugated container board. The brightness of recycled pulp from newspaper increased with crude enzymes from Trichoderma viride and Phanerochaete chrysosporium. The brightness of recycled pulp of corrugated container board increased with crude enzyme from Phanerochaete chrysosporium, but decreased with crude enzyme from Trichoderma viride. The Δbrightness with chemical bleaching of crude enzyme treated pulp was lower than that of heat killed enzyme treated pulp, but the final brightness of pulp was increased. Modification of recycled paper with crude enzymes can result in a substantial increase in physical properties with little no loss in pulp freeness.

• 청정기술
• /
• 제23권1호
• /
• pp.73-79
• /
• 2017

기후 변화 대응을 위한 온실가스 감축 측면에서, 석탄화력발전소에서 바이오매스 사용량은 계속하여 증가되어 왔다. 파리 협정 이후 온실가스 감축 목표치가 더욱 구체화되면서 바이오매스 사용은 급격히 더 많아질 것으로 예상된다. 미분탄 석탄 화력발전에서 바이오매스 혼소시 가장 큰 문제점 중 하나는 바이오매스의 미분성이 석탄에 비해 훨씬 낮다는 것으로, 이를 해결하기 위해 가장 먼저 바이오매스의 미분성 측정 방법을 확립하는 작업이 필요하다. 석탄의 경우 HGI (hardgrove grindability index)측정 장치를 통해 분쇄도 측정이 가능하여 이를 표준으로 삼고 있지만, 바이오매스의 경우 표준 측정 방법이 확립되어있지 않다. 본 연구에서는 볼 밀과 입자 크기별 분포량을 이용한 석탄과 바이오매스의 분쇄 실험을 진행하였다. 실험에는 석탄 1종과 바이오매스 6종을 사용하였다. 분쇄시간에 따른 입자 분포량을 비교하고, $75{\mu}m$ 이하 입자 분포량으로 분쇄도를 평가하였다. 실험결과 반탄화 바이오매스 TBC (torrefied biomass chip)와 TWP (torrefied wood chip)는 발전용 사용적합 기준에 대해 대략적으로 70%의 값을 나타냈다. 다른 바이오매스들의 경우 반탄화 바이오매스와 비교했을 때 분쇄성이 훨씬 더 낮은 결과를 보였다. TBC와 TWP는 수분이 감소하고 섬유질 구조가 분해되는 반탄화 과정을 통해 분쇄가 향상되었다. 또한 분쇄도가 높은 반탄화 바이오매스가 소모전력이 낮게 측정되었다. 본 연구를 통해 바이오매스의 석탄화력발전 적용을 위한 표준화 작업의 기초 자료들을 확보할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권1호통권129호
• /
• pp.48-57
• /
• 2005

플라스틱 가소제로 사용되고 있는 프탈레이트류(phthalate esters)의 백색부후균에 의한 분해 특성을 확인하기 위해 본 연구에서는 프탈레이트 제조에 사용되고 있는 전구체로서 프탈산(phthalic acid)의 분해를 Polyporus brumalis를 이용하여 확인하였다. 프탈산(phthalic acid) 50 ppm을 액상 배지에 처리하고 균체에 의한 프탈산의 감소율을 확인한 결과, 배양 4일 후부터 감소하기 시작하여 배양 24일에는 배지 내에서 검출되지 않아 완전히 분해되었음을 확인하였고, 배양 기간 동안 리그닌 분해 효소 활성 변화는 배양 10일 후부터 대조구에 비해 프탈산 처리구의 효소 활성이 저조하게 나타남을 확인하였다. Esterase의 경우에는 대조구에서 보여지는 효소 활성 변화와는 달리 배양 10일 이후에 지속적으로 증가하는 것을 확인하였다. 영양원으로 사용된 glucose는 배양 6일 째까지는 대조구와 프탈산 처리구간에 감소율이 유사하였으나, 이후 배양 시간이 연장됨에 따라 배지 내에서 급격하게 감소하는 것을 확인하여 대조구에 비해 프탈산 처리구가 glucose 소모율이 낮았다. 이는 프탈산이 균체에 흡수된 후에 대사작용에 이용되기 때문이라 사료된다. 또한, 균체외 효소에 의한 프탈산의 화학적 구조변화를 GC/MS를 이용하여 분석한 결과 반응 12시간 이내에 무수프탈산으로 탈수 반응이 급격히 진행되는 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권4호
• /
• pp.316-322
• /
• 2010

본 연구의 목적은 폐식용유를 오존산화 처리에 의한 구조적 변성을 시도하고 이를 pMDI와 반응시켜 목재접착제로 개발하고자 하는 것이다. 폐식용유를 사용하여 1, 2, 3시간 오존산화 처리 한 후 화학적 변화를 알아보기 위하여 FT-IR을 측정하였다. 또한 접착강도를 조사하기 위하여 상태, 내수, 내온수, 반복끓임 실험을 하였다. FT-IR 측정 결과, 폐식용유의 오존산화가 진행될수록 불포화 이중결합에 기인한 3,010 $cm^{-1}$ 부근의 흡수가 사라지고 1,700 $cm^{-1}$ 부근의 카르복실기의 흡수가 크게 나타났다. 특히 3시간대에 3,010 $cm^{-1}$ 부근에 이중결합이 거의 사라짐을 알 수 있었다. 3시간 처리한 폐식용유의 상태 접착력 시험 결과, 폐식용유: pMDI 비율이 1 : 0.5일 때 8.08 kgf/$cm^2$, 1 : 0.75일 때 9.53 kgf/$cm^2$, 1 : 1일 때 44.16 kgf/$cm^2$ 1 : 2일 때 58.08 kgf/$cm^2$, 1 : 3일 때 61.41 kgf/$cm^2$, 1 : 4일 때는 46.95 kgf/$cm^2$를 나타내어 MDI와의 적정당량이 1 : 2, 1 : 3 부근에서 결정됨을 알 수 있었다. 중량비 1 : 2, 1 : 3만을 선택하여 각각 내수, 내온수, 반복끓임 상태로 접착강도 시험을 실시하였다. 내수 접착강도에서는 1 : 3의 경우가 더 높은 값을 보였으나 실험조건이 강화된 내온수, 반복 끓임에서는 혼합비율 1 : 2와 1 : 3이 비슷한 값을 나타내었다.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.446-451
• /
• 2018

In this study, different formulations of magnesium oxide and various modifiers (phosphoric acid, ferrous sulfate, pure acrylic emulsion, silicone acrylic emulsion, glass fiber, and polypropylene fiber) were used to prepare magnesium oxychloride cement composites. The compressive strength of the magnesium oxychloride cement was tested, and the softening coefficients of the composites after soaking in water were also calculated. The results showed that a magnesium oxychloride cement sample could not be coagulated when the MgO activity was 24.3%, but the coagulation effect of the magnesium oxide cement sample was excellent when the MgO activity was 69.5%. While pure acrylic emulsion, silicon-acrylic emulsion, and glass fiber showed insignificant modification effects on the magnesium oxychloride cement, ferrous sulfate heptahydrate, phosphoric acid, and polypropylene fiber could effectively improve its water resistance and compressive strength. When the phosphoric acid, ferrous sulfate heptahydrate, and polypropylene fiber contents were 0.47%, 0.73%, and 0.25%, respectively, the softening coefficient of a composite soaked in water reached 0.93 after 7 days, and the compressive strength reached 64.3 MPa.

• Journal of Plant Biotechnology
• /
• 제42권2호
• /
• pp.93-103
• /
• 2015

The isolation, cloning, and characterization of an R2R3-MYB transcription factor gene (MtMYB70) from the model legume Medicago truncatula is reported. MtMYB70 consists of a 768-bp coding sequence corresponding to 255 amino acids. Sequence alignment revealed that MtMYB70 cDNA contains conserved R2R3-type MYB domains with highly divergent C terminal regions. MtMYB70 was found to have relatively low sequence homology with known R2R3-MYB genes. Phylogenetic analysis placed the R2R3-MYB domain of MtMYB70 closest to PtMYB1, a known activator of lignin biosynthesis. Overexpression of MtMYB70 under the control of the 35S promoter in transgenic poplar did not cause a significant difference in total lignin content relative to the control, but glucan content was significantly increased in transgenic poplar. Therefore, MtMYB70 might have regulatory role in the biosynthesis of cell wall structural carbohydrates.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.59-66
• /
• 2013

Fillers have been used for printing paper to improve printability, sheet formation and optical properties and to reduce production costs by replacing expensive wood pulps. However, an increased filler content will decrease paper strength because filler particles interfere with fiber-fiber bonding. In order to increase filler content without sacrificing too much paper strength in high filler content papers, the surface of precipitated calcium carbonate (PCC) has been modified by adsorbing anionic polyacrylamide and cationic starch in series. The adsorbed polymer layers would enhance interactions between the filler surface and the fiber surface, improving internal bonding. It was found that the modified PCC increased paper strength at a given filler content compared to the coventional method. Negligible differences in optical properties and formation of paper, filler and fines retention and drainage on the wire section were observed between the modified and the conventional PCC. However, the decreased bulk of paper was observed when the modified PCC was used.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.746-752
• /
• 2006

The major objective of this study is to investigate the dynamic behavior evaluation of split PC sleepers for railway turnout by the field test. In railway engineering, a turnout is necessary to allow a vehicle to move from one track to another. So, turnout is required very complex railway technologies such as lolling stock, track. In reference to conventional line speed-up and improvement railway, accurate assembly of turnout affects travel ins qualify of turnout area and running safety. Because of heavy weight and a large volume of the long sleeper used to turnout and car limit, transport and the prerequisite for trouble-free transport of the factory pre-assembled major turnout components is achieved through division of long sleepers. The one of the advantages for using a split sleeper is to reduce the dynamic vibration according to the information of developed nations. Therefore, we investigate the characteristic of dynamic behaviors of split sleepers which are adopted for the first time to improve performance of turnout From the field test results of the split sleeper, it is evaluated that the modification of weight, material and stiffness compared with wood sleeper is very effective for the ballast safety. However, the decrease in vibration of split sleeper was not found out.

• 한국가구학회지
• /
• 제25권1호
• /
• pp.28-35
• /
• 2014

The most widely used material in furniture is wood. It is not only because it has good machinability and can be easily accessed, but also it is eco-friendly and human-friendly. Such material has been continuously being used for furniture and its machining method has been being actively researched and developed. Lumber has and has developed its own machining method. The conventional lumber machining method is difficult to make various types of furniture because it focuses on solving lumber's own modification problem due to the swelling and shrinking, and durability. Considering such characteristic of the material, a method to make it light and durable has been being researched and possibilities were found in wooden ships. Wooden ships are ships made of lumber, and are light and strong to be used in water. Also, in order to reduce the water resistance, it has streamlined curves so is formatively beautiful. The elegant curves and light and strong structure showed sufficient possibility to be used in furniture. Thus, the purpose of this study is to find a method to make various shapes of lumber lightly and strongly, using the production method of wooden ships, and to use this production method in designing furniture to propose a new form and structure of bench design, differentiating from conventional monotypic furniture.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.115-119
• /
• 1999

During mechanical pulp production and blcaching wood components, such as extractives, carbohydrates and lignin are dissolved and dispersed into the process waters. These components are called dissolved and colloidal substances(DCS). DCS can accumulate during water circulation and can in turn affect paper machine runnability and also the strength and optical properties of the paper. In this work DCS fraction origination from TMP process were treated with enzymes acting on triglycerides. glucomannans, and lignin and the effect of enzymatic treatments on the water composition as well as sheet properies were evaluated. Lipases were found to modify the chemical structure of the extractives resulting in more hydrophilic fibre surface and subsequent improvement in the sheet strength properties. Mannanase treatment, on the other hand, destabilized pitch. As a result, aggregation of pitch to the fibres was observed which in turn resulted in impaired strength properties. Laccase could effectively polymerize lignans and the reaction products seemed to be sorbed onto the fibres.