• 한국가구학회지
• /
• 제13권1호
• /
• pp.2-8
• /
• 2002

This study was carried out to investigate the reasonable condition for better dimensional stability in woods by polyethylene glycol(PEG) treatment. Eight species grown in Kangwon-do were used for this study. Three species of softwoods(Pinus densiflora, Pinus koraiensis, Larix kaempferi) and two species of hardwoods(Prunus sargentii, Populus tomentiglandulosa) treated with 30% aqueous solution of PEG 1000 showed good dimensional stability under the treatment for 1 day. The dimensional stability of Betula davurica, Quercus mongolica and Quercus variabilis woods increased with increasing treatment time. From the above results, it was concluded that PEG penetration and dimensional stability were affected by characteristics of wood species such as density and structure.

• 한국가구학회지
• /
• 제13권1호
• /
• pp.9-17
• /
• 2002

Laminated lumber is an engineered wood products using stress rated, seasoned and selected lumber. Each piece of lumber is graded, and then end jointed to produce the required length. This study was carried out to investigate the possibility of wooden artifacts with laminated lumber. It is expected through this research that wooden artifacts, which have originality and local character, can be developed by making design of wooden artifacts through the use of plentiful resources around the local area. A development of new design products, an improvement of distributive structure and the achievement of international competitiveness will contribute to develop the industrial artifacts art in Korea. And, it is necessary to develop a corporation system between industrial craft companies and universities.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.233-237
• /
• 2014

The eco-friendly preservatives such as ACQ or CUAZ have been used in landscape architectural facilities these days. In this study, the decay efficacies of ACQ treatments were evaluated according to domestic veneer species, concentration of ACQ, weathering test, adhesive type, and fungus type. In case of veneer species, hinoki cypress and yellow poplar showed the highest and lowest decay resistance, respectively. And the decay resistance appeared to be greater in plywoods bonded by resorcinol resin-bonded plywood and non-weathering treated plywood than polyurethane resin-bonded plywood and weathering treated plywood.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.31-36
• /
• 2000

Woodceramics are new porous carbon materials obtained by carbonization of wood or woody materials impregnated with thermosetting resin in a vacuum furnace. This study examined the electrical properties of woodceramics made from thinned logs of Cryptomeria japonica as a use for electric articles. The summarized results were as follows: 1. The volume resistivity of woodceramics decreased with increasing density of woodceramics made from 3 type board. And the volume resistivity of woodceramics made from non- steamed board was somewhat higher than steamed board. 2. The consumption of electric power of woodceramics decreased with increasing density of woodceramics and resin contents made from 3 type board. And the consumption of electric power of woodceramics made from non-steamed board was somewhat higher than steamed board. 3. When the woodceramics were coated by silicon, the consumption of electric power increased about 7%.

• 한국가구학회지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2001

This study was carried out to elucidate the relationship between wood anatomy and the water flow path in P. koraiensis and L. leptolepis. through the experiment of penetration of the dye solution. The experiment was performed by permeating 1% acid, alkali and direct solution into the xylem just after being cut. The results obtained were summarized as follows : 1. In P. koraiensis and L. leptolepis, the dye solution penetrated into sapwood and annual rings adjacent to cambial zone were only dyed according to ascent of tree height. 2. The penetrability of latewood was better than that of earlywood. 3. In P. koraiensis and L. leptolepis, the main water flow path in longitudinal direction was the trachied and that in transverse direction was ray trachied and ray parenchyma. Also, the dye solution was found in resin canal. 4. P. koraiensis was more permeable than L. leptolepis. 5. Among the acid, alkali and direct dye solution, the acid dye solution was the most permeable.

• 한국가구학회지
• /
• 제17권4호
• /
• pp.49-57
• /
• 2006

Larix kaemferi is now a major economic kind of trees and is produced in large quantity every year. Thus, the study of Larix kaemferiis conducted to acquire the basic date of measures for the reasonable use, clarifying the relation with the compression strength parallel to grain according to anatomical properties by heartwood and sapwood, and earlywood and latewood. As the length of an earlywood tracheid and the radial wall thickness of earlywood and latewood tracheids increased, the compression strength rose, and as the height of uniseriate ray in cell number increased, the compression strength parallel to grain fell. The major anatomical factors effecting on the compression strength parallel to grain of heart wood were the radial wall thickness of a latewood tracheid and the length of a latewood tracheid, while in sapwood, the length of an earlywood tracheid and the radial wall thickness of earlywood and latewood tracheids were the major factor on it.

• 한국가구학회지
• /
• 제13권2호
• /
• pp.11-18
• /
• 2002

This study was carried out to investigate the strength and technical feasibility of glulam from small diameter Pinus densiflora and Larix kaempferi. Small diameter logs are currently not used in structural laminated beam construction, but it is suggested that its properties may be feasible for this purpose. The glulam combinations were designed with high grade laminae located at outer laminations (face) and low grade laminae located at center laminations. Important problems of finger jointed glulam as a structural beam are the small modulus of rupture (MOR). One solution for this problem Mi to use veneer and solid wood as the face laminae. The MOE values were predicted for each beam from laminae. The results showed that actual beam MOE values exceeded slightly the predicted values. Based on the evaluation and analysis of Pinus and Larix glulam, the maximum load of Larix kaempferi glulam indicated large values. The bending properties of A and E types glulam were superior to others. It is suggested that this small diameter log can be a candidate for structural glulam construction, providing the proper combinations of face laminae.

• 한국가구학회지
• /
• 제17권4호
• /
• pp.109-114
• /
• 2006

An investigation was carried out for the annual ring width, longitudinal tracheid diameter and wall thickness in different tree heights for Pinus koraiensis Sieb. et. Zucc. The annual ring width increased along with the tree height, however the tracheid diameter and wall thickness decreased with the tree height. Tracheid wall thickness was found the thickest at 2.0m from the above ground samples and it increased gradually from pith to bark. Radial tracheid diameter was found to be larger than that of tangential tracheid diameter in earlywood. But, it was found to be the opposite in latewood. In earlywood, the average values of tracheid wall thickness was found the range of $2.1-3.0{\mu}m$, whereas, in latewood, it was $2.4-4.2{\mu}m$.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.490-503
• /
• 2009

The objective of this work was to investigate the mechanism of heat transfer in hot-pressing process for MDF manufacturing by reference study. Firstly, general heat transfer theory was studied. The numerical analysis of heat transfer in hot-pressing process was studied on temperature profile, moisture profile, physical properties between moisture and board. The mechanism of heat and moisture transfer inside of board was analyzed by conduction, convection, radiation and diffusion of bound water in wood cell walls. Especially, the change of core temperature as hot press time was important factor to setup hot-pressing schedule in MDF manufacturing.

• 한국가구학회지
• /
• 제19권4호
• /
• pp.300-306
• /
• 2008

Nepal is rich country in terms of its vast array of biological diversity. The relationship between local communities and the biological diversity in Nepal is a very entangle one, whereby two-thirds of our population are heavily dependent upon the biodiversity for their survival. The destruction of biodiversity signifies the destruction of people's livelihoods and survival. Biodiversity and genetic resources conservation has been a most significant part of the Nepalese society due to its socio-economic and cultural importance and provides the human race trees for timber, fuel, food, industrial raw materials, pharmaceuticals, beverages and environmental stabilization. Threats to biodiversity at global level is of greater concern, specially, human activities are the greatest factor currently affecting biodiversity, through the use of natural resources by industry, agriculture, hunting, and energy generation.