• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.1-11
• /
• 2006

접목 과정에서 형성되는 새로운 2차목부의 특징을 광학현미경 및 전자현미경적 차원에서 조사하고자 해송(Pinus thunbergii)을 사용하여 자가접목(autograft)을 실시하였다. 조직학적으로 접목은 괴사층의 형성, 치유조직(callus)의 형성 및 발달, 새로운 형성층의 분화 및 새로운 2차조직의 형성 등 4단계를 거치는 것으로 나타났다. 접목 초기에 형성된 괴사층은 펙틴과 리그닌 성분으로 구성되어 있었으며, 점진적으로 분해되어 대목과 접수가 결합하는 시점에 소멸되었다. 접목 초기에 축적되었던 전분 입자와 지질은 접목이 진행될수록 점진적으로 감소하였으며 세포질 내 소기관, 핵 및 원형질연락사의 변화는 관찰되지 않았다. 유세포로 구성된 치유조직으로부터 접목 15일후부터 새로운 형성층(neocambium)이 발달하였으며, 이곳에서 새로운 2차조직이 형성되기 시작했다. 새로운 2차목부는 형성층에서 기원하는 정상적인 2차목부와는 다른 분화 및 형태를 나타냈다. 새로운 2차목부는 망상 또는 벽공상의 비후에 의한 2차벽을 갖는 가도관 요소에서 기원하였으며, 2차벽의 형성은 비후된 세포벽 사이를 충전시키는 형태로써 진행되었다. 2차벽의 형성은 불균일하고 간헐적이었으며 형성된 2차벽의 두께는 불균일하였다. 새로운 2차목부의 가도관은 S자 또는 소용돌이 모양을 지니는 것으로 수평 방향으로 배열되었다.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.59-66
• /
• 2013

Fillers have been used for printing paper to improve printability, sheet formation and optical properties and to reduce production costs by replacing expensive wood pulps. However, an increased filler content will decrease paper strength because filler particles interfere with fiber-fiber bonding. In order to increase filler content without sacrificing too much paper strength in high filler content papers, the surface of precipitated calcium carbonate (PCC) has been modified by adsorbing anionic polyacrylamide and cationic starch in series. The adsorbed polymer layers would enhance interactions between the filler surface and the fiber surface, improving internal bonding. It was found that the modified PCC increased paper strength at a given filler content compared to the coventional method. Negligible differences in optical properties and formation of paper, filler and fines retention and drainage on the wire section were observed between the modified and the conventional PCC. However, the decreased bulk of paper was observed when the modified PCC was used.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.14-20
• /
• 2012

In this paper, the flame-retardant wall paper was successfully prepared with recycled polyethylene terephthalate (PET) short cut fiber with flame-retardant property and wood pulp using polyvinyl alcohol (PVA) as binder followed by treatment of non-halogen flame retardant. Physical properties such as formation index, tensile strength, elongation, and burst strength increased as defibrillation increased except tear strength. Bulk increased but formation index, tensile strength, elongation and burst strength decreased along with addition of PET short cut fiber. It was also found that tear strength rose significantly up to 30% of PET short cut fiber and then declined (fell) rapidly. As addition level of PVA increased tensile strength, elongation and burst strength increased, but tear strength decreased slightly. Addition of 20% of PET short cut fiber and 13% of PVA provided the flame-retardant wall paper with both improved flameproofing and physical properties.

• Journal of Plant Biotechnology
• /
• 제3권2호
• /
• pp.45-57
• /
• 2001

Trees have the ability to undergo secondary growth and produce a woody body. This tree-specific growth is affected by the secondary vascular system and the developmental continuum of secondary phloem and xylem. Secondary growth is one of the most important biological processes on earth. Considering its economic and environmental significance, our knowledge of tree growth and development is surprisingly limited. Trees have received little attention as model species in plant science, as most Plant biology questions can be best addressed by using herbaceous model species, such as Arabidopsis. Furthermore, tree biology is difficult to study mainly due to the inherent problems of tree species, including large size, long generation time, large genome size, and recalcitrance to biotechnological manipulations. Despite all of this, one must rely on trees as models to study tree-specific questions, such as secondary growth, which cannot be studied effectively in non-woody model species. Recent advances in genomics technology provide a unique opportunity to overcome these inherent tree-related problems. Several groups, including our own, have been successful in studying the biology of wood formation with a variety of hardwood and softwood species. In this article, 1 first review the current understanding of tree growth and then discuss the recent attempts to fully explore and realize the potential of molecular biology as a tool for enhanced understanding of secondary growth.

• Steel and Composite Structures
• /
• 제50권6호
• /
• pp.689-703
• /
• 2024

Construction of high-rise structures, formwork systems that can be installed quickly, resistant to external loads, can be used more than once, have become a necessity. Timber and composite timber materials are preferred in the formation of such formwork systems due to their durability, ease of assembly, light weight and easy to use more than one time. Formwork beams are the most commonly used structural component in the formation of such formwork systems, and these beams can be damaged for different reasons during their lifetime. In this study, H20 top P type timber formwork beams with 1800 and 2450 mm length which is among the products of DOKA(c) company is damaged under the effect of static loading up to a high load level of 85% of the maximum ultimate capacity and after being retrofitted using anchored CFRP strips, performance and behavior of the beams under the influence of various loading types such as static, fatigue and impact are investigated experimentally. Two different lengths of retrofitted timber formwork beams were tested by applying monotonic static, fatigue and impact loading and comments were made about the effects of the retrofit method on performance under different loading types.

• 동의생리병리학회지
• /
• 제23권1호
• /
• pp.34-40
• /
• 2009

After a research on appearance diagnosis and fish, bird, horse, and turtle types, this study concluded as following. Appearance diagnosis is a technique that exams five jang organs by color and shape of eye, nose, mouth, and ear. Four HyungSang types-including fish, bird, horse and turtle types-are evaluated upon the external shape that are created while type of seed changes. Appearance diagnosis focuses on five jang organs. Four HyungSang types focus on external shape, but are eventually related to five jang organs. Thus, two different techniques possess a point in common; five jang organs. The assignment of nose, eye, ear and mouth to the Five elements varies between two techniques. On the viewpoint of formation, appearance diagnosis assigns them to metal-water-wood-fire-earth and movement, and four HyungSang types do to wood-fire-earth-metal-water and constitution. On the viewpoint of body/use and static/dynamic, appearance diagnosis assigns them to metal-water-wood-fire-earth and constitution, and four HyungSang types do to wood-fire-earth-metal-water and movement. If nose, eye, ear, and mouth are assigned by on four HyungSang types, which are based on external shape, the assignment can be utilized in diagnosis. If, however, they are assigned by appearance diagnosis, it can be focus on treatment. Five jang organs and six fu organs are affected by internal conditions because they are located inside of human body, while four HyungSang types are affected by external conditions because it deals with external shape. If a disease occurs in the developed part of the body, it would be difficult to be cured because four HyungSang types depend on external shapes.

• 한국균학회지
• /
• 제34권2호
• /
• pp.88-91
• /
• 2006

가평에서 낮은 생산성을 보이는 저온성 품종과 고온성 품종의 균사상태 및 골목 표면에 형성된 해균에 대한 조사를 시도했다. 순수배지에서의 균사생장력을 조사한 결과, 저온성 균주는 분리균에 비해 보존균의 생장력이 1.1% 정도 떨어지는 것으로 나타났으며, 고온성 균주는 분리균의 생장력이 보존균의 생장력에 비해 8.0% 정도 떨어지는 것으로 나타났다. 톱밥배지에서의 균사생장력을 조사한 결과, 고온성 분리균은 보존균에 비해 10.8%정도 생장력이 떨어졌으며, 저온성 분리균은 보존균에 비해 25.1% 떨어지는 것으로 나타났다. 중량감소율 조사결과, 고온성 분리균은 보존균에 비해 20.1% 정도 중량감소율이 낮았으며, 저온성 분리균도 보존균에 비해 19.0%정도 낮은 것으로 나타났다. 무처리에 비해서는 고온성 보존균이 107.0%, 고온성 분리균이 49.5%, 저온성 보존균이 85.4%,저온성 분리균이 50.0% 더 감소된 것으로 나타났다. 대치배양한 결과, 고온성 분리균과 저온성 분리균 모두 각각의 해당 보존균들과 동일한 균주임을 확인할 수 있었다. 또한 골목에서 검은혹버섯(Hypoxylon truncatum), 구름버섯(Coriolus versicolor), 기와층버섯(Inonotus xeranticus), 삼색도장버섯(Daedaleopsis tricolor), 이중껍질버섯(Graphostroma platystoma), 점균류(Myxomycetes) 2종, 푸른 곰팡이(Trichoderma sp.), Hypoxylon fragiforme, Hypoxylon howeianum, Nitschkia confertula 등 총 11종의 해균이 발견되었으며, 골목들의 상태는 좋지 않았다.

• 한국균학회지
• /
• 제38권1호
• /
• pp.5-7
• /
• 2010

Auricularia auricula-judae is an edible mushroom, which is known as wood ear, free ear, black ear mushroom, and free jelly fish. Present experiments were conducted to determine the possibility of artificial cultivation with oak sawdust of A. auricula-judae. The duration of mycelial growth and days of pinhead formation on oak sawdust bag (1.4 kg) were 29~32 days and 13~17 days, respectively. The yield of fresh fruit-body was 275~350 g.

• 공업화학
• /
• 제21권4호
• /
• pp.469-474
• /
• 2010

목재는 연소성이 높은 본질적인 결함을 가지고 있다. 본 연구의 목적은 자연 건조된 굴참나무와 느티나무의 연소성질을 시험하였다. 열방출율과 CO/$CO_2$ 발생과 연기차폐와 같은 연기지수를 콘칼로리미터(ISO 5660-1)를 이용하여 측정하였다. $50kW/m^2$의 외부 열유속하에서 굴참나무의 총 방출열량, THR ($140.2MJ/m^2$)은 느티나무의 THR ($85.7MJ/m^2$) 과 비교하여 높게 나타났다. 그리고 굴참나무의 총 연기발생량, $TSP3.50m^2$는 느티나무의 $TSP0.65m^2$에 비하여 높게 나타났다. 이들 결과는 시험목의 체적밀도에 의존함을 보여준다. CO/$CO_2$ 발생비는 굴참나무와 느티나무가 각각 0.053, 0.043을 나타내었다. 또한 느티나무가 굴참나무에 비해 숯생성으로 인한 증대된 연소 억제성을 보여주었다.

• 복식
• /
• 제65권6호
• /
• pp.1-14
• /
• 2015

This study is aims to study the background of how the shape of the wooden shoes developed and worn by Koreans and Japanese in the ancient times by sorting and examining the types and shapes. Relevant bibliography, which are mainly related to the excavated wooden shoes from 3 B.C.E to C.E. 8., were used as research materials. The formation of wooden shoes required easy access to raw materials -which is trees- for production. According to the analysis, both Korea and Japan made the flat wooden shoes using cuboid wood. Both countries bore a hole on a specific location to distinguish the right foot and left foot, however the style of the heel was different in the two countries. The slip-on(Undu-hyeong) wooden shoes were also common in both countries. The slip-on had no-heels and was made by digging-out a piece of the cuboid wood. Some slip-ons made by the Japanese had furrows on the bottom, and they were known to make different types of the slip-on wooden shoes depending on the purpose. Observation of the wearing methods show that commonality can be found between the wooden shoes of Korea and Japan, and this indicates that cultural exchanges between the Silla/Baekje and Japan took place from the 4th to the 6th century. Also, the flat wooden shoes in Japan developed rapidly, as the shoes became an integral part of its life and culture, which was closely tied to agriculture. Eventually, due to the difference in climate and life-style, the slip-ons became the primary type of wooden shoes in Korea, while the flats became the main type of wooden shoes in Japan. It is, however, clear that as the relationship between the two countries became closer, the cultural exchanges regarding the wooden shoes were considerable.