• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.43-50
• /
• 1978

The elder berry was known to the rich in natural food colour resources and used in as for making wine, confectionary, perfumes, natural food colour, making elder berry juice, jelly, jam and medicinal properties or oils. In the present study, wish was to find the effect of various factors on the success of the vegetative propagation of elder berry by means cutting in the exposed field and green house was carried out and those obtained results can be summarized as follows. 1. Cuttings with dormant cutting stocs in the polyethylen house with heating and water mist spray resulting 100 percent survival. And temperature and the relative humidity in which fraim during the cutting season were around $20{\sim}25^{\circ}C$ and 70-90% respectively and in case as more significant other of the 1% Level. 2. With five varieties tested, resulting 93.8 percent survival, The F. value is not significant. 3. With four organs of cutting stock tested resulting 57.5 percent survival on the cuttings with two knodes of dormant cutting stock served as better cutting stock than others. The F. value is more significantly 1% Level. 4. Dormand bud served as possible cutting stock was found to be 17.66 survival percentage. 5. Both earlier and later stage of germinated Leaves with soft wood cutting stock poor cuttings, and the degree of development of 15th June cutting stock was optimum stage on the principal factor governing the success of cutting in the soft wood cutting showing 54% survival. The F. value is more 1% Level significant.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.135-142
• /
• 2006

The package loading process of tile lumbering industry is an operation that after a pair of workers binds three or six lumber into a unit and cut the both ends of the lumber, carry and pack and load the weight cargo of 30-50kg. The package loading process causes lots of noise and wood dust when the lumber are cut and brings about the main cause of the musculoskeletal disorder when workers carry the heavy goods. Therefore, we developed the monolithic package loading equipment cutting both ends that is enable to improve the working method and environments of the existing package loading process. The noise and wood dust were reduced by developing the device and the main cause of shirking duties on working place was solved by preventing the musculoskeletal disorder and improving the working environments as excluding the work of carrying heavy goods.

• Journal of Korean Society of Forest Science
• /
• v.76 no.4
• /
• pp.390-396
• /
• 1987

The model and its example were provided to predict wood production for a district forest planning. The method of Gentan probability is widely accepted for the prediction of wood production. The suggested model is different in the decision of cutting age distribution from that of Prof. Suzuki; the former can use either Weibull distribution or Gamma distribution, but the latter is possible only by Gamma distribution. This developed system can be used not only for establishing a district forest planning, but also for providing forest management information, such as periodic harvest volume, growing stock, labor requirement, and so forth.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.31-44
• /
• 1970

This experiment is conducted fer method cf bring to perfectly from defective cutting sapling 25 a production method of sapling which is to substitute for conventional graf ting. 1. In green wood cutting root comes out after 15 days of cutting with nearly straight development of root system; after 40 days of cutting, roots with total length of 1119 mms 43 roots, and 5.4 grs a root in total weight obtained. 2. Survival percentage of green wood cutting ranges between 56％ and 90％, average 73％ of that and it varies with natural characteristics of varietes. The results show variety of Gaeryang-Suban and Iljiroe with 80％ as a best ones in contrast with the variety of Shipyung. 3. The varietics or Gaeryang-Suban. Iljiroe, Suwon-Sang No.4, Rosang makes of much more roots than Yongchonchuwoo and Shipyung do. 4. Root ability made good number of roots commercially, when cutting is conducted soaking in 0.01 ％ NAA solution or 0.02％ NAA solution for 2 or 3 seconds as a chemical promoter. 5. Economical measures for increase of scion adapted 1) 2 scions from a green wood 50 cm long should be taken and basal pan of scion at its middle portion should be cut right under the node. 2) Scions below 50cm long may be used. Small scions or growthceased shoots h3ve also considerable root ability enough to be used. 3) Thus far, up 100,000 scions might be produced in 10 a. 6. We can find number of root increased, when cutting the opposite side in obliquity manner at 450. 7. When 110,000 saplings in 10 a. for the production of bring to perfectly from defective cutting sapling planted, quality of stocks does not go to bad condition without any obstacles in practical use. 8. Although the times or grafting delayed until middle of July, quality of sapling goes just a little down. Grafting may be conducted from early June to middle of July separately in several times, and the green wood of prunned mulberry in spring is available for a scion after end of June. 9. 10 grs weight of defective cutting sapling makes 95％ of complete sapling, otherwise 5 or 10 grs in weight of one becomes 80％ of complete sapling with its quality as similar as grafted one. 10. When the sapling planted, its branches should be cut, leaving 3 or 4 buds at the bottom of new branches. 11. In view of economical stand point, production cost of bring to perfectly from defective cutting sapling obtains 52％ of grafting cost.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.12-20
• /
• 2006

The objectives of this study were to identify the species of coffin woods excavated at Ma-jeon relic in Jeonju and to date this coffin using tree-ring method. Al coffin woods were identified as red pines, most possibly, Pinus densiflora S. et Z. Tree-ring dating provides a calender year to each ring and produces the cutting date, if the bark presents. Due to the presence of bark and complete latewood present, the cutting date of the tree for coffin turned out between A.D. 1637 autumn and 1638 spring. However, due to the seasoning and storage periods, actual coffin manufacturing and burial time may be a little different from the tree-ring date.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.1-6
• /
• 1999

European spruce and maple were to be estimated as raw material of violin family instruments with linear modal analysis to provide the information data for the design of their bodies. Wood specimens cut in different direction were excited by impact hammer to measure the resonant frequency with typical vibrational modes. In spite of lower density than maple, European spruce showed the excellent acoustical properties with higher resonant frequency. And edge-grained spruce had more even frequencies than flat-grained ones to be more acceptable as front plate of violin. Resonant frequency was positively correlated with wood density of each specimen and the coefficients of edge-grained specimens were higher than those of flat-grained specimens of both wood species.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.79-90
• /
• 2006

Tamarix chinenis blooms twice a you and its flowers, branches and leaves make the adjustment of tree shape. Propagation methods and growth characteristics of T. chinensis were studied in order to ascertain its potential use as one of vegetation resources for coast forestation and landscaping. The study results indicated that 1 or 2 you old hard wood cuttings showed higher rooting ratio than greenwood or semi hard wood cuttings. One to one mixture between vermiculite and pearlite appeared to be the best for bed soil, and sea sand and silt(loess) mixture was the next. Sea sand and granitic soil followed after. In terms of seasonal differences, spring cuttings showed the best rooting ratio, root number, and root length. Fall cuttings followed after spring cutting, and summer cuttings showed worst results regarding rooting ratio, root number, and root length. The best rooting promotion effects of growth regulators were observed with sea sand bed soils. There was no significant difference among growth regulators in terms of rooting and shoot growth. Low concentration below 100 ppm of growth regulators was enough for rooting promotion effect. In general, the number and mean length of roots and shoots were showed the excellent records in the sites with high rooting ratio. The study result strongly showed that T. chinensis can be considered as a suitable tree for coast forestation and landscaping because of its easy cutting propagation and rapid growth on saline lands.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.406-414
• /
• 2013

This study aims to date wooden coffins excavated from graves in Shinnae-dong, Seoul, South Korea, using dendrochronology. The species of woods used to make the coffins were identified as Pinus densiflora S. et Z., one of the major conifers in Korea. Of 12 graves, 10 were successfully dated using various red-pine chronologies of South Korea. Due to the absence of the last-formed tree ring before felling, the number of sapwood rings, used to obtain likely cutting dates, had to be estimated. The terminus post quem for two coffins without plaster frames were AD 1548 and AD 1571, respectively. Eight coffins with plaster frames yielded estimated dates from AD 1664 to AD 1799. The tree-ring dates indicated that the coffins with plaster frames in Shinnae-dong were constructed approximately 100 years later than those without plaster frames.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.103-109
• /
• 2011

This study was conducted to develop mass production method by proper cutting time, and the concentrations of plant growth regulators of Spiraea spp. Plants of hard wood was cut on March 3th, the rooting rate in S. salicifolia and S. cantoniensis was 11.3% comparatively higher than that about 5% in S. trichocarpa, S. miyabei, S. japonica, S. thunbergii and S. fritschiana. The rooting of control was 6.0%, however the $125{\sim}1,000mg{\cdot}L^{-1}$ IBA or NAA for 3 hour soaking was above 15.0% in the S. salicifolia. Therefore soaking in $125mg{\cdot}L^{-1}$ of IBA or NAA solution was recommended before cutting. The proper cutting time for soft wood from May 7 to September 17 in S. trichocarpa, S. cantoniensis, S. prunifolia, and S. thunbergii was September 17 when the soft stem was changed hard and the temperate was proper for rooting, high and low, $25{\pm}3^{\circ}C$ and $18{\pm}3^{\circ}C$. The rooting of September 17 was above 70% in S. salicifolia and S. fritschiana. However, the rooting from middle of May to early August was low below 20% in all the genus of Spiraea.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.784-789
• /
• 2012

Ultrasonic Cutting which uses a tuned blade resonant in a longitudinal mode, has been used to cut a range of materials from confectionery, baked products and frozen foods, to wood, bone, foams and composites. The Blade design typically uses finite element analysis, and it could be predicted vibration mode, gain and amplitude uniformity of the blade tip at resonant frequency. In this paper, FEA used to predict the vibration characteristic of the blade, and then the results were verified by analysis system of resonant frequency using the processed blade. The crack of the blade which is predicted from FEA was compared with the crack occurred by cutting experiment of rubber materials using the processed blade.