• Title/Summary/Keyword: wood block test

Search Result 28, Processing Time 0.022 seconds

Effects of Nutrient Composition on Yield and Quality of Mushroom in Lentinula edodes Cultivation Using Softwood Sawdust

  • Jung, Ji-Young;Hong, Seong-Cheol;Rinker, Danny Lee;Choi, Myung-Suk;Lee, Byung-Hyun;Yang, Jae-Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.38 no.2
    • /
    • pp.124-134
    • /
    • 2010
  • This study was performed to evaluate the efficiency of using softwood as the sawdust medium for Lentinula edodes cultivation, effect of nutrient on the mycelial growth, spawning, the mushroom yield, and quality. The nitrogen nutrition significantly enhanced the mycelial growth of L. edodes. The glutamic acid in the L. leptolepis and P. koraiensis, and asparagine in the P. densiflora were appeared to slight increase in the mycelial growth. The vegetable oil showed very effective on the mycelial growth in the P. koraiensis sawdust medium. Carbon/nitrogen ratio of all the test was reduced after mycelial growth. The mycelial growth was exclusively dependent on reduction of carbon. The mushroom yield (32.7%) of the P. densiflora sawdust medium (carbon source: 3% active carbon, nitrogen source: 0.4% asparagines) was the best in mushroom production of L. edodes, followed by the Q. variabilis sawdust (35.4%) of the control medium. The diameter of mushroom cap was obtained from the P. densiflora sawdust (carbon source: 3% sucrose, nitrogen source: 0.4% potassium nitrate) and P. koraiensis sawdust (carbon source: 3% sucrose, nitrogen source: 0.4% potassium nitrate), and the P. koraiensis sawdust (carbon source: 3% xylose, nitrogen source: 0.4% glutamic acid, supplement: 0.05% amino acid), with values 71.5 mm, 71.5 mm and 72.1 mm, respectively. In the polypropylene bag cultivation, the weight losses of the block medium gradually increased for 80 days in the dark (13.8~16.8%) and then became stable in the range of 20.7~25.8%.

The Effect of Diameter and Prehole Clearance for Wooden Dowel on the Withdrawal Loads of Domestic Particleboard (국내산 파티클보드에 대한 나무못의 직경과 천공여척이 나무못 유지력에 미치는 영향)

  • Kim, Birm-June;Cha, JaeKyung
    • Journal of the Korea Furniture Society
    • /
    • v.28 no.1
    • /
    • pp.53-59
    • /
    • 2017
  • Wooden dowels are commonly used to join the particleboard members together in many types of structures, But little information is available concerning their holding properties in domestic particleboard. This study was performed to determine the withdrawal loads and strengths on the effect of diameter of dowel and hole clearance. The test block was manufactured from 15 mm thick domestic particleboard. The dowel was manufactured 6, 8 and 10 mm diameters from korean castanea, korean pine and tuliptree. Research reported here indicates that withdrawal loads increase, but withdrawal strengths decrease, as the dowel diameter increases. This study also indicates that dowel withholding load and strength for particleboard less decrease than those for domestic wood as a hole clearance decreases.

The physiological characteristics of Pleurotus ferulae Lanzi (아위버섯균의 생리적 특성)

  • Kim, Dae-Sik;Chai, Jung-Ki;Wi, Kye-Moon;Yoon, Dai-Ryoung;Oh, Deuk-Sil;Chang, Kyoung Soo;Son, Han-Gil
    • Journal of Mushroom
    • /
    • v.2 no.2
    • /
    • pp.88-96
    • /
    • 2004
  • This study was executed to decide the physiological characteristics of Ferule mushroom. Four strains of Ferule mushroom were tested to select a superior strain in its mycelial growth. The pertinent substrates, temperature and pH ranges for the growth of selected strain were determined. And then, the wood rotting ability and type of the Ferule mushroom were determined. The superior strain F-2 among four strains was selected, on the basis of its vegetative mycelial growth and density on agar media. Mycelial growth of F-2 was the best on MYPA among other tested synthetic or semi-synthetic media. The temperature range for pertinent mycelial growth was about $25{\sim}34^{\circ}C$ and best at $30^{\circ}C$. The optimum pH range on MYPA was 5.0~6.0. The mycelial growth was mostly stimulated by soluble starch at cont. 1% (w/w) and secondly, maltose among several carabon sources and by mixed solution of YE(0.25%) and ME(0.25%) but not by ME alone. Cell thining and erosion of Pinus rigida wood by the mycelia of Ferule mushroom were found only on a few cell but largely at wood block test, indicating that the softwood rotting ability of Ferule mushroom mycelia was not so good. The result of polarized light microscopy appeared that cellulose of some tracheides showing the S3 layer lost brifringence was degraded by Ferule mushroom. But only part of cellulose of P. rigida wood was degraded by Ferule mushroom, because most of wood cells continued to showing briefingence. A largely degraded ray parenchyma and longitudinal parenchyma cell and partly thinning and erosion of hardwood(Quercus serrata) cell was found and it indicates that the rotting ability of Ferule mushroom mycelia on hardwood was higher than on softwood. It could be concluded that the difference in the wood rot by Ferule mushroom between the hardwood and softwood was made by the difference of chemical constitutions between them, especially in the contents and the types of lignin. Ferule mushroom was considered as white rotter as a result of bavendam test, although more research should be required.

  • PDF

Strength Properties of GFRP Reinforced Glulam Beams Bonded with Polyvinyl Acetate-Based Emulsion Adhesive (초산비닐수지계 접착제를 사용한 유리섬유강화플라스틱 복합집성재의 강도 성능 평가)

  • Park, Jun-Chul;Hong, Soon-Il
    • Journal of the Korean Wood Science and Technology
    • /
    • v.36 no.4
    • /
    • pp.19-25
    • /
    • 2008
  • This study was carried out to investigate the bending strength properties of the unreinforced glulam beams and the GFRP laminated glulam beams according to the volume ratio of GFRP. The 7-layer glulam beams ($10cm(b){\times}14cm(h){\times}180cm(l)$) were manufactured, using Larch (Larix kaempferi Carr.) laminae ($2cm(h){\times}10cm(b){\times}360cm(l)$), which were dried to the moisture content of 8% and specific gravity of 0.54. GPRP of 0.1 and 0.3 cm was reinforced between the outmost layer of bottom and next layer. When the glulam beams were reinforced with GFRP at the volume ratio of 0.7% and 2.1%, respectively, the bending strength was increased by 12% and 28%, respectively, in the reinforced beams than in control glulam beams. Also, the GFRP reinforced layer of the glulam beams with GFRP laminations blocked the progression of rupture, and the unbroken part held about 90% of the bending strength. In the results of glue joints test, the block shear strength is higher than $7.1N/mm^2$, the standard of KS F3021, and in the result of delamination, the adhesive strength is good as the water soaking and boiling delamination was less than 5%.

Clinical Evaluation and Treatment of Leg Length Inequality (하지길이균차에 대환 임상평가와 치료)

  • Kim, Chang-Hwan;Kim, Jong-Deog
    • The Journal of Korea CHUNA Manual Medicine
    • /
    • v.5 no.1
    • /
    • pp.19-29
    • /
    • 2004
  • Objectives : Visual check and X-ray are commonly used by chiropractors to estimate ieg length inequality, This study have three categories: diagnosis for anatomic leg length inequality; difference between anatomic and functional leg length inequality; theraphies for anatomic or functional leg length inequality. Methods : We referred to a PubMed site by using word of 'leg length [JU] J Manipulative Physiol Ther', only items with abstracts. Results : We searched 26 articles in J Manipulative Physiol Ther with the key word-Ieg length. Conclusion : 1. Radiographs were most accurate and commonly used by chiropractors to measure anatomic leg length inequality, clinically wood block, tape measure, visual check are acceptable. 2. There was no article about difference between anatomic and functional leg length inequality. 3. Heel lift was commonly used with conservative theraphy for anatomic leg length Inequality. 4. Chiropractors have not yet proved that the supposed positive effects are a result of a reduction of subluxation, The detection of the manipulative lesion in the sacroiliac joint depends on valid and reliable tests, Because such tests have not been established, the presence of the manipulative lesion remains hypothetical. Great effort is needed to develop, establish and enforce valid and reliable test procedures.

  • PDF

A Study on the Construction Specification and Quality Assurance Criteria in Clay Paver (점토바닥벽돌의 품질 및 시공기준 연구)

  • Park, Dae-Gun;Lee, Sang-Yum;Kim, Kyoon-Tai
    • Korean Journal of Construction Engineering and Management
    • /
    • v.11 no.6
    • /
    • pp.111-121
    • /
    • 2010
  • As the customer's interest for sidewalk block in the street or apartment complex is increasing, the materials of block which had been a concrete block exclusively are varied to clay paver, native rock and wood etc. Especially, the sales volume of clay paver which is environment-friendly and ergonomic is dramatically increasing every year with two digits growth rate, however, many problems like "Edge Cracking" "Freezing Breakage" "Bending Breakage" "Joint Gap" are happening frequently within a couple of hours after installation due to the durabilities. Because of the characteristics of Ceramic products, clay pavers are very easy to be broken when they are bumped against each other. In addition, they are relatively fragile by a freezing expansion breakage when exposed to water due to hydrophilic property as well as the intensity and absorptance of the products are varied with small difference from the production process such as production equipment and process control. Therefore, it costs a lot of money to repair the breakdown unless production and installation is carried out according to the strict criteria of the quality control. In this study, the symptoms of breakdown frequently happened in clay paver are classified by each type and finally the solution for this problem in the production of brick, installation and criteria of quality control through compressive strength and absorptance test is suggested.

Variation in Growth Characteristics of Pinus densiflora S. et Z. at Eight Experimental Plantations of Korea (8개(個) 시험지(試驗紙)에서 소나무 산지별(山地別) 생장특성(生長特性) 변이(變異))

  • Kim, Kyu Sick;Han, Young Chang
    • Journal of Korean Society of Forest Science
    • /
    • v.86 no.2
    • /
    • pp.119-127
    • /
    • 1997
  • Japanese red pines growing along the Taebaek mountains have been called "Kangsong" and considered to be superior in growth and wood quality. An attempt was made to determine whether their boundaries for planting may be expanded by testing their early growth at eight experimental plantations of the Republic of Korea. Seeds were collected from the six different natural populations including Uljin in Kyongbuk province. For the provenance test, they were planted in eight different regions including Taean in the spring of 1987. Experimental planting was a randomized complete block design with 3 replications. Height growth was measured at the ages of 2, 4, and 6 after planting, and the diameter at root collar at the age of 6 after planting. Significant variation in height growth was observed among the plantations. The height growth measured at the age of 6 after planting showed a positive correlation with the latitude of the test plantation, and the contents of phosphate, potassium and calcium in the soil. A negative correlation, however, was observed between the longitude of the test plantation and height growth. Ponghwa provenance appeared to be the best among the provenances in that the trees from the area grew 16% better in volume growth than the average of all the trees tested in the study, while the worst one was Kyongju from which trees grew 11% less than the average.

  • PDF

The cultivate characteristics and the wood rotting ability and type of the Kuehneromyces mutabilis Sing. et A. H. Smith (무리우산버섯균의 배양적 특징과 목재부후 특성 파악)

  • Yun, Dae-Ryoung;Chai, Jyung-Ki
    • Journal of Mushroom
    • /
    • v.2 no.4
    • /
    • pp.192-199
    • /
    • 2004
  • The mycelial mass of K. mutabilis greatly increased at pH 5.5~6.0 but decreased pH 6.0. The linear mycelial growth wsa mostly supported on sawdust of Quercus accutisima and the mycelial density wsa high on sawdust of Q. accutisima and corn cob. Much mycelial distribution could be showen in ray parenchyma cell and ray tracheid. Severe degradation of ray parenchyma cell was found but little degradation of ray tracheid cell was found. The dry weight loss wsa 5.9% after agar-block test. And the pH wsa acidified from 6.07 to 4.31 and hot water extractives was decreased after degradation of Q. serrata sawdust by K. mutabilis.

  • PDF