• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.21-24
• /
• 2019

In this paper, 5.8GHz 25W microwave wireless power transmission system was developed. The transmission system is composed of a signal generator, a 1W drive amplifier, a 25W power amplifier, and a circularly polarized transmission antenna. The receiving system was fabricated with an integrated receiver that combines a circularly polarized receiving antenna, a pass band filter, and an RF-DC converter. And a multi-integrated receiver had twelve parts, including an integrated receiver. Under the conditions, voltage and current were measured for the system at 5cm intervals from a minimum distance of 5cm to a maximum distance of 80cm. The power was calculated for the system. The results of the system are shown in tables and graphs. The power decreases with distance, but the power does not drop sharply due to a multi-integrated receiver.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.195-201
• /
• 2017

High-power wireless transmission system becomes a key technology for the advance of battery-powered devices. The wireless power transfer devices are currently dominated by the inductive and capacitive wireless power transfer systems, which have relatively low power transmission capacity and low efficiency rather than the wired power transmission. The work presented in this paper proposes an alternative method of high-power transmission system, based on a variable speed motor system with a magnetic coupling. It enables high-capacity power transmission, high efficiency, and low possibility of failures, and the performance of the proposed scheme is verified by simulation and experiments.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.806-817
• /
• 2016

Opportunistic routing (OR) has been proposed as a viable approach to improve the performance of wireless multihop networks with lossy links. However, the exponential growth of the bandwidth-sensitive mobile traffic (e.g., mobile video streaming and online gaming) poses a great challenge to the performance of OR in term of bandwidth guarantee. To solve this problem, a novel mechanism is proposed to opportunistically forwarding data packets and provide bandwidth guarantee for the bandwidth-sensitive traffic. The proposal exploits the broadcast characteristic of wireless transmission and reduces the negative effect of wireless lossy links. First, the expected available bandwidth (EAB) and the expected transmission cost (ETC) under OR are estimated based on the local available bandwidth, link delivery probability, forwarding candidates, and prioritization policy. Then, the policies for determining and prioritizing the forwarding candidates is devised by considering the bandwidth and transmission cost. Finally, bandwidth-aware routing algorithm is proposed to opportunistically delivery data packets; meanwhile, admission control is applied to admit or reject traffic flows for bandwidth guarantee. Extensive simulation results show that our proposal consistently outperforms other existing opportunistic routing schemes in providing performance guarantee.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.25-30
• /
• 2012

It is important to detect dangerous objects which are intentionally abandoned in public places. Nowadays visual surveillance system is required to enhance the performance in two ways : high resolution and wireless linking ability. In this study the design of visual surveillance system is newly proposed to detect abandoned objects for social security purpose based on wireless high resolution image transmission technology. Also, to enhance PED, PAT performance, the tracking algorithm is included in the previous visual surveillance software scheme. By implementing proposed design scheme on the real wireless high resolution image transmission system, the effectiveness of the overall system is shown with the transmission performance of 4.0 Gbps speed.

• The KIPS Transactions:PartA
• /
• v.13A no.7 s.104
• /
• pp.573-580
• /
• 2006

The conventional transport layer protocol TCP is designed to work under condition of packet loss is due to the network congestion, so that it's suitable in the traditional wired network with fixed hosts but it's inefficient on the wireless network where the environment of fading, noise, and transmission error comes from interference. This result from the needless transmission control of the bit error is due to treats the packet loss as a packet congestion control in the wireless network. In this paper, we propose the advanced SNOOP protocol with the consecutive packet loss and TCP window control to avoid the needless congestion management algorithm in wireless network for the wireless TCP packet transmission enhancement. We verify the performance of the advanced module from the simulation experiment result.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.57-60
• /
• 2001

This paper has studied the WAP packet transmission time, using WTP SAR algorithm. One method that is improved transfer ability, SAR fragmented WTP total message down from upper layer and then packet is transmitted to RLP frame time slot. In this paper, we analysis the transmission time of WAP packet with variable HLP layer size on the CDMA wireless channel for next generation systems as well as PCS, DCS. From the results, we can obtain the WAP packet transmission time and optimal WTP packet size.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.88-91
• /
• 2015

Wireless power transmission (WPT) is a technology using free space as a conductor for transmitting electric power, which aims to transfer not just the transmission signal but also the electrical energy itself. This paper takes issue with the microwave wireless transmission technology utilizing in long-distance transmission. To construct the WPT system, several components are needed, such as RF Oscillator which converts AC power to RF through DC status, high gain antenna and RF rectifier that converts RF back to DC. The array topology is good a candidate for wide use. The objective of this research is to study the efect of the WPT systmem on electric power system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.166-171
• /
• 2012

In this paper, short-range underwater wireless communication technique using visible LEDs is proposed. As an alternative to conventional acoustic system, visible LED communications show high quality and high speed data transmission characteristics. We design a frequency modulation-based optical wireless audio transmission system. The CD4046B phase-locked loop device is applied to implement the frequency modulation and demodulation. With a transmission modulation of 100 kHz, audio signal has successfully received at a transmission distance of 30 cm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4050-4067
• /
• 2014

In wireless sensor networks, link scheduling is a fundamental problem related to throughput capacity and delay. For a given set of communication requests $L=\{l_1,l_2,{\cdots},l_n\}$, the MLS (maximum link scheduling) problem aims to find the largest possible subset S of Lsuch that the links in S can be scheduled simultaneously. Most of the existing results did not consider bidirectional transmission setting, which is more realistic in wireless sensor networks. In this paper, under physical interference model SINR (signal-to-noise-plus-interference-ratio) and bidirectional transmission model, we propose a constant factor approximation algorithm MLSA (Maximum Link Scheduling Algorithm) for MLS. It is proved that in the same topology setting the capacity under unidirectional transmission model is lager than that under bidirectional transmission model. However, compared with some work under unidirectional transmission model, the capacity of MLSA is improved about 28% to 45%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1251-1260
• /
• 2008

Diffuse wireless optical communication offers more robust optical links in terms of coverage and shadowing than line-of-sight links. However, traditional diffuse wireless infrared (IR) transceiver systems are more susceptible to multi-path distortion and great power decrease, which results in limiting high-speed performance. Multi-beam is an effective technique to compensate for multi-path distortion in a wireless infrared environment. The goal of this paper is to analyze the transmission characteristics by replacing traditional diffuse system (TDS) which contains single wide angle transmitter and single element receiver by system consisting of three-beam transmitter and non-imaging receiver (TNS) attached with compound parabolic concentrator (CPC). In the simulation, we use the recursive model developed by Barry and Kahn and build the scenario based on 10 different cases which have been listed in Table 1. Moreover, we also check the reliability of the TNS diffuse link channel by BER test on the basis of different receiver positions and room sizes. The simulation results not only show the basic transmission characteristics of TNS diffuse link, but also are references to design more efficient and reliable indoor infrared transmission systems.