• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.188-192
• /
• 1997

The purpose of this study are changing wired medical instrument's terminal into wireless and implementing BSS of Wireless Local Area Network. the wireless terminal using frequency hopping spread spectrum in ISM band transfers patients medical information data such as ECG data, Patient Disease Indication Message to AP(or Server) and it also performs that as a response of transmission request in server. we made Clinet-Server network structure support only BSS service and patient's terminal controlled by polling in server. Wireless Terminal will guarantee mobility and give doctors real time monitoring capability in office.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.967-970
• /
• 2002

Multihop wireless networks consist of mobile terminals with personal communication devices. Each terminal can receive a message from a terminal and send it to the other terminal. In this paper, we discuss edge coloring problems related to multihop wireless networks. We show some relations about the problems.

• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2007

This paper proposes a MAC protocol for real-time VBR (rt-VBR) services in wireless ATM networks. The proposed protocol is characterized by a contention-based mechanism of the reservation request, a contention-free polling scheme for transferring the dynamic parameters, and a priority scheme of the slot allocation. The design objective of the proposed protocol is to guarantee the real-time constraint of rt-VBR traffic. The scheduling algorithm uses a priority scheme based on the maximum cell transfer delay parameter. The wireless terminal establishes an rt-VBR connection to the base station with a contention-based scheme. The base station scheduler allocates a dynamic parameter minislot to the wireless terminal for transferring the residual lifetime and the number of requesting slots as the dynamic parameters. Based on the received dynamic parameters, the scheduler allocates the uplink slots to the wireless terminal with the most stringent delay requirement. The simulation results show that the proposed protocol can guarantee the delay constraint of rt-VBR services along with its cell loss rate significantly reduced.

• Journal of Navigation and Port Research
• /
• v.40 no.1
• /
• pp.43-50
• /
• 2016

Amid of the logistics hub center competition is going to intensifying between the world major port, it is essential to pre-occupied the base in the logistics hub world take advantage of advanced technology of logistics equipment than other ports. In existing container terminal, when container moves the terminal use the omnidirectional and directional antenna in order to exchange data information on the basis of 802.11 wireless network system. Case of loading height of exceeding, the blind sport will occur and a limited frequency channel can't help using in the area. A limited frequency channel usage and nested areas happen to use the closed terminal, it has a great influence to operate the terminal working. In this paper, LTE network is configured provided by the specified company ('L' Corp,.Ltd) and terminal data extracted through LBO (Local Breakout) in the cell site which is configured directly with container terminal operation server. Using this method, container terminal yard equipment operate without overlapping arises with uninterrupted data presented for ways to efficiently. I would suggest both the existing wireless AP LAN configuration of container terminal and new LTE system and applied to the real yard operating devices situations. Through these methods presented comparative the existing network traffic with new constructed LTE configuration. I admired to suggest that wireless network LTE introduction is fundamental factors to get rid of the blind spot, the problem of limited frequency channel and overlapping arises. These essential points can be a continual improving terminal services and more efficient terminal operational management.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.778-798
• /
• 2014

This paper proposes a novel exposed-terminal-eliminated medium access control (ETE-MAC) protocol by combining channel reservation, collision avoidance and concurrent transmissions to improve multi-access performance of the multihop wireless networks. Based on the proposed slot scheduling scheme, each node senses the control channel (CCH) or the data channel (DCH) to accurately determine whether it can send or receive the corresponding packets without collisions. Slot reservation on the CCH can be simultaneously executed with data packet transmissions on the DCH. Therefore, it resolves the hidden-terminal type and the exposed-terminal type problems efficiently, and obtains more spatial reuse of channel resources. Concurrent packet transmissions without extra network overheads are maximized. An analytical model combining Markov model and M/G/1 queuing theory is proposed to analyze its performance. The performance comparison between analysis and simulation shows that the analytical model is highly accurate. Finally, simulation results show that, the proposed protocol obviously outperforms the link-directionality-based dual-channel MAC protocol (DCP) and WiFlex in terms of the network throughput and the average packet delay.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.1-6
• /
• 2006

This paper proposes association algorithm using load balancing for efficient AP selection under environment of wireless local area network(WLAN). Our scheme measures arrival time of association information when establishing the connection between access points and access terminal, analyzes the load condition of AP, and applies load balancing. AT selects and sets up low traffic AP by measuring traffic of connected access terminal, which can prevent over-franc of access points under hotspot environment that users access simultaneously. According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• Journal of Information Technology Applications and Management
• /
• v.15 no.1
• /
• pp.261-270
• /
• 2008

Wireless Mesh Networks (WMNs) have emerged as one of the new hot topics in wireless communications. WMNs have been suggested for use in situations in which some or all of the users are mobile or are located in inaccessible environments. Unconstrained transmission in a WMN may lead to the time overlap of two or more packet receptions, called collisions or interferences, resulting in damaged useless packets at the destination. There are two types of collisions; primary collision, due to the transmission of the stations which can hear each other, and hidden terminal collision, when stations outside the hearing range of each other transmit to the same receiving stations. For a WMN, direct collisions can be minimized by short propagation and carrier sense times. Thus, in this paper we only consider hidden terminal collision while neglecting direct collisions. To reduce or eliminate hidden terminal collision, code division multiple access (CDMA) protocols have been introduced. The collision-free property is guaranteed by the use of spread spectrum communication techniques and the proper assignment of orthogonal codes. Such codes share the fixed channel capacity allocated to the network in the design stage. Thus, it is very important to minimize the number of codes while achieving a proper transmission quality level in CDMA WMNs. In this paper, an efficient heuristic code assignment algorithm for eliminating hidden terminal collision in CDMA WMNs with general topology.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.41-48
• /
• 2011

Wireless communication technology developed, portable wireless devices based on wireless network including the smartphone rapidly developed, and products with functions similar to highly efficient computer are being launched. Therefore, active studies to enable performance of works, which were previously held in computers, on portable wireless terminal are being held. Until now, simulation was undertaken using computers which satisfy high performance computing resource. Such contains a problem that it cannot break away the limit of space. Portable wireless terminal has the merit that it can break away from the limit of space by using wireless network in comparison to wired environment. In this paper, it suggests a simulator based on wireless devices for distributed simulation. For such purpose, the performance time of simulation will be compared in regards to the case of performing nodes control simulation in a single highly efficient computer and the case of performing distributed simulation in many wired and wireless network environments. Through the comparison, the possibility for utility of portable wireless terminal as the object of distributed simulation will be verified, and it will be presented that simulation can be performed in a shorter time by performing distributed simulation under various wired and wireless network environments away from the limit of space.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.252-254
• /
• 2004

This paper proposes a common platform for an internet-based mobile robot and its operator terminal. The common platform can reduce the cost and time to develop an internet-based robot and its operator terminal. The robot performs the role of a server and its terminal a client. One operator can use this terminal to make a command and this command can be sent to the robot through a wireless network. According to given commands, the robot moves a point and sends an image by using a camera or desired information by using other sensors. The information sent from the robot can help an operator to control the robot. The mobile robot consists of two modules, main module and motion module. Main module can exchange information with the operator terminal, process information, and send a command to motion module. Each application program for one internet-based mobile robot and its operator terminal will be developed to show that the same platform can be used for them. Also, it will be shown that the robot can be controlled easily by using its operator terminal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1258-1267
• /
• 2003

As the need for stable and high speed wireless Internet service Brows, the wireless LAN service provider hurries to preempt wireless LAN service market. IAPP(InterAccess Point protocol) is defined to be able to provide a secure handoff mechanism of wireless LAN terminal information between AP(Access Point)s, and the related IEEE standard is IEEE 802.11f. For the secure handoff of wireless LAN terminal, it is necessary to transfer terminal's authentication & accounting information securely from old AP to new AP IEEE 802.11f recommends RADIUS server as IAPP server which authenticates AP and provides information for secure channel between APs. This paper proposes IAPP server using Diameter protocol to overcome the limit of RADIUS sewer, and describes about the interaction between server components and integration method with the current IAPP client system.