• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.883-895
• /
• 2007

In this work, we present the development of a patrol robot which is intended to navigate outdoor rough terrain. Proposed mechanism consists of six legs for overcoming an obstacle, and six wheels for traveling. Also, in order to absorb vibration in rough terrain effectively, the slide-spring system and tubed type tire are adopted to each leg and each wheel. The control system of robot consists of several imbedded boards for management of lots of diverse devices such as sensors designed for rough terrain, motor controllers, camera, micro controller and so on. And the base system of the robot is designed to operate in real time and to surveille in the vicinity of the robot, and the robot system is controlled by wireless LAN connected to GUI-based remote control system, while CAN communication connects the control board and the device controllers for sensors and motor controllers. For operating this robot system efficiently, we propose the control algorithms for autonomous navigation using GPS, stabilization maintenance by posture control, obstacle-avoidance by impedance control, and obstacle-overcoming with interference-avoidance between wheels. The performance of the robot and the proposed algorithms are tested and proved by a set of experiments in outdoor rough terrain.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.909-914
• /
• 2005

This paper proposes an efficient antenna selection scheme for PRT (Personal Rapid Transit) remote control in a wireless MIMO-OFDM systems. Using high correlation among neighboring sub-carriers, transmit antennas are selected by calculation based on the channel response of the center sub-carrier in each subgroup. This scheme reduces complexity of selection algorithm and significantly reduces the feedback channel information with small performance degradation. Especially, when feedback channel rate between a control base and a train is fixed, the proposed scheme can provide a significant advantage in high mobility.

• Journal of Sensor Science and Technology
• /
• v.20 no.6
• /
• pp.420-427
• /
• 2011

The population of elderly people increases rapidly as our society moves towards the aged one. Healthcare for the elderly becomes an important issue and falling down is one of the critical problems although not well recognized. In this study, a fall detection system was developed using a 3-axis accelerometer. Analyzing fall patterns, we took into account the degree of impact, posture angle, the repetitions of similar movements and the activities after a potential fall and proposed an algorithm of fall detection. Information of the fall sensor was sent to a remote healthcare server through the wireless networks of Zigbee and WLAN. Our system was designed to monitor multiples users. 12 persons participated in experiment and each one performed 24 different movements. Our proposed algorithm was compared with other reported ones. Our method produced the excellent results having a sensitivity of 96.4 % and a specificity of 100 % whereas other methods had a sensitivity range between 87.5 % and 94.8 % and a specificity range between 63.5 % and 83.3 %.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.810-816
• /
• 2007

A security robot system named EGIS-SR is a mobile security robot through one of the new growth engine project in robotic industries. It allows home surveillance through an autonomous mobile platform using onboard cameras and wireless security sensors. EGIS-SR has many sensors to allow autonomous navigation, hierarchical control architecture to handle lots of situations in monitoring home surveillance and mighty networks to achieve unmanned security services. EGIS-SR is tightly coupled with a networked security environment, where the information of the robot is remotely connected with the remote cockpit and patrol man. It achieved an intelligent unmanned security service. The robot is a two-wheeled mobile robot and has casters and suspension to overcome a doorsill. The dynamic motion is verified through $ADAMS^{TM}$ simulation. For the main controller, PXA270 based hardware platform based on linux kernel 2.6 is developed. In the linux platform, data handling for various sensors and the localization algorithm are performed. Also, a local path planning algorithm for object avoidance with ultrasonic sensors and localization using $StarGazer^{TM}$ is developed. Finally, for the automatic charging, a docking algorithm with infrared ray system is implemented.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.58-63
• /
• 2015

This study suggested the mobile intelligent management system based on the cloud service. The mobile intelligent management system are composed of cloud server, middleware and sensor networks. Each modules are controlled on mobile environment and observed operating status of each apparatus for environment. In this pater, the image-based moving detection algorithm applied in order to detect an intruder and average 12.3% are measured in moving detection experiments. it was confirmed the validity of the security device.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.439-441
• /
• 2007

The seoul metropolitan subway has installed 8 lines and about 500 stations to transport 5 million passengers everyday. The underground air pollution level in the subway stations is very severe status, which is very harmful to the commutators and its personals. Although subway roles as such a massive and huge transportation system, the subway doesn't adapt yet any real-time air monitoring system. They have only some hand-held type detector equipments for monitoring air pollution. Therefore subway passengers are exposed to the harmful air pollution environment. The most harmful environmental parameters among the air pollution are known as the dust and sound noise dB level in the subway station. Because the dust is consisted of very small particles, we can't see them easily in dark condition on the platform, but it is very harmful. The monitoring system for air pollution is developed using embedded system attached with 6 different environmental sensors. This system monitors air pollution of dust sound noise, gas, temperature, humidity, inflammable gas, toxic gas in the subway ?station. The sensor unit of the ARM-CPU board and sensor transmits real time environmental data to the main server using Zigbee wireless communication module and TCP/IP network. The main control server receives and displays the real-time environmental data, and it send alarms to the personals when high level value.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.189-196
• /
• 2011

In order to subsitute for the normal mode helical wire antenna, bent monopole antenna combined with a helical structure is proposed as a kind of printed antenna. The antenna which can be operated at 418MHz has been simulated and designed by use of a commercial EM simulator Microwave Studio(MWS). It has been observed that the proposed antenna has good agreements between simulated results and measured results such as the return loss and the radiation pattern. The proposed antenna has been applied practically to the wireless remote controller operationg at 418MHz. It has been observed that the use of the proposed antenna result in similar antenna performance from view point of radiation power when compared with the use of the previous normal mode helical antenna.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.107-108
• /
• 2010

Uncertainty and insecurity is a serious issue in all aspects of our society today as the change in environmental and societal conditions became more apparent than ever before through various disasters. Thus, it is now an important point in time for the government and responsible firms to implement an innovative scientific disaster management method that can lead to establishing a more secure and stable future. Therefore, authors have developed ubiquitous- based disaster prevention automation system(DPAS). The system would follow up after sensors detecting fires, thefts, torrents, floods, and infrastructural leaks. It prevents disasters in advance by utilizing a wireless communications net or ethernet to conduct real-time monitoring from a remote place. The system also has an advantage as it is designed in a compact size that applies a precision-focused programmable logic controller(PLC) of one-chip type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.241-246
• /
• 2004

We have designed LED display system using ARM7TDMI processor and implemented hangul input and output. This system is easily extensible because controller board and LED matrix board were designed one module. Possible Input Methods of LED display system are PC, PDA and remote controller's wired and wireless communication. We have ported QT/Embedded 2.3.7 with touch panel Input at embedded board of Linux OS 2.4.18 and PXA255 Processor based. QT Application which we coded is able to input displaying text using ethernet communication on embedded system. Many of indicating text data is able to be saved because only korean alphabet codes are stored for data which users want displaying.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.300-306
• /
• 2000

This paper introduces a new concept of automation for bio-production with tele-operative system. The proposed system showed practical and feasible way of automation for the volatile bio-production process. Based on the proposition, recognition of the job environment with object identification was performed using computer vision system. A man-machine interactive hybrid decision-making, which utilized a concept of tele-operation was proposed to overcome limitations of the capability of computer in image processing and feature extraction from the complex environment image. Identifying watermelons from the outdoor scene of the cultivation field was selected to realize the proposed concept. Identifying watermelon from the camera image of the outdoor cultivation field is very difficult because of the ambiguity among stems, leaves, shades, and especially fruits covered partly by leaves or stems. The analog signal of the outdoor image was captured and transmitted wireless to the host computer by R.F module. The localized window was formed from the outdoor image by pointing to the touch screen. And then a sequence of algorithms to identify the location and size of the watermelon was performed with the local window image. The effect of the light reflectance of fruits, stems, ground, and leaves were also investigated.