• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.601-604
• /
• 2012

Recently, there have been many attempts to monitor the equipment's condition or the input devices in sensors remotely by using cable and wireless communications. Also, the research and development on this matter has been actively carried on. In this paper, we developed the monitoring system which will eliminate the errors of manual reading by humans and therefore will secure reliability between tenants and the building management office. Through the system, the private telecommunication network can be connected between the building management office and the households. This enables the control office to remotely read the electric meter and exact energy consumption of each household even when the tenants are absent.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.41-44
• /
• 2003

We propose portable equipment that monitors current and voltage of high-potential power transmission lines. In the equipment, a current and voltage sensor are attached to an insulator that supports a power transmission line: A clamped to the power line and the detected current signal is transmitted to the ground station by a wireless optical link using transmission line is detected by a high resistance element, zinc oxide (ZnO). That acts as a potential divider between the power line and ground. We make an experimental device for 66kV power line and demonstrate that it can monitor currents proposed equipment is small-sized, light, and inexpensive in comparison with the conventional CT (current transformer) and PT (potential transformer) since it does not require high potential insulators and magnetic cores, further, the equipment is easily installed owing to its small size and its simple structure.

• Journal of Biomedical Engineering Research
• /
• v.30 no.1
• /
• pp.66-78
• /
• 2009

A mobile ultrasound scanner developed for use in point-of-care applications is introduced, which can not only provide ultrasound images but can also measure various bio-signals. The mobile ultrasound scanner is also designed to meet the demanding requirements for point-of-care diagnosis, such as battery-powered operation, portability in terms of size and weigh, and real-time wireless communications capability for remote diagnosis. To meet these requirements, an efficient beamforming method for high resolution imaging with a small number of active elements, a hardware efficient beamformer architecture, and echo processing algorithms with greatly reduced computational complexity have been developed. Experimental results show that the prototype mobile ultrasound scanner is fully functional and satisfies most of the design requirements.

• Convergence Security Journal
• /
• v.10 no.2
• /
• pp.27-35
• /
• 2010

We implemented an application system which is able to verify visitor identification for remote bundle control based on OSGi and web camera control using embedded linux system. This system are designed open Oscar framework by porting java on the embedded linux system and implemented web camera system in local area networks. Also This system can verify information of visitor from receiving the data of RFID reader and designed the wireless internet system in home. Basically, in this paper we expect that home network system development and the period of application service development are reduced with integrated service provision based on OSGi.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.138-143
• /
• 2002

This paper describes a framework for extending GIS databases to support moving object data type and query language. The rapid progress of wireless communications, positioning systems, and mobile computing devices have led location-aware applications to be essential components for commercial and industrial systems. Location-aware applications require GIS databases system to represent moving objects and to support querying on the motion properties of objects. For example, fleet management applications may require storage of information about moving vehicles. Also, advanced CRM(Customer Relationship Management) applications may require to store and query the trajectories of mobile phone users. In this trend, maintaining consistent information about the location of continuously moving objects and processing motion-specific queries is challenging problem. We formally define a data model and query language for mobile objects that includes complex evolving spatial structure, and propose core algebra to process the moving object query language. Main profit of proposed moving objects query language and algebra is that proposed model can be constructed on the top of GIS databases.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.382-384
• /
• 2008

D-TRS is a method of wireless communication. This method will be able to use several frequency for multiple user used chanel together. TETRA of D-TRS technology is not rented network. Using TETRA network has the strong point which cost better than CDMA network of rental network. Master server of SCADA(Supervisory Control And Data Acquisition) system is realtime supervise control and a data acquire the control system or the RTU(Remote Terminal Unit). The present paper is developed and proposal the gateway platform for electronic power backbone network based on D-TRS. This gateway platform is converted DNP3.0 messages with TETRA PDU and converted TETRA PDU with DNP3.0 messages. Master server and FRTU will be able to send and receive DNP3.0 message via TETRA network using this gateway platform.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.26-33
• /
• 2017

A drone performs a mission through remote control or automatic control, which uses wireless communications technology. Recently the increasing use of drones, the drone signal RF detection is necessary. In this paper, we propose an efficient dron RF detection method through simulations considering Wi-Fi, Bluetooth and dedicated protocol dron communication method in ISM(Industry Science Medical) band.. After configuring an environment where a common terminal and a drone signal are mixed, a general terminal and a drone signal are distinguished from each other by using a RF characteristic according to a dron movement. The proposed drone RF detection method is the WRMD(Windowed RSSI Moving Detection) operation and the Doppler frequency identification method. The simulation environments consist to mixed for two signals and four signals. We analysis the performance to proposed drone RF detection technique thorough detection rate.

• Smart Structures and Systems
• /
• v.8 no.1
• /
• pp.93-105
• /
• 2011

This paper presents a flexible low-profile antenna sensor for fatigue crack detection and monitoring. The sensor was inspired by the sense of pain in bio-systems as a protection mechanism. Because the antenna sensor does not need wiring for power supply or data transmission, it is an ideal candidate as sensing elements for the implementation of engineering sensor skins with a dense sensor distribution. Based on the principle of microstrip patch antenna, the antenna sensor is essentially an electromagnetic cavity that radiates at certain resonant frequencies. By implementing a metallic structure as the ground plane of the antenna sensor, crack development in the metallic structure due to fatigue loading can be detected from the resonant frequency shift of the antenna sensor. A monostatic microwave radar system was developed to interrogate the antenna sensor remotely. Fabrication and characterization of the antenna sensor for crack monitoring as well as the implementation of the remote interrogation system are presented.

• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.897-908
• /
• 2018

In this paper, we propose a security framework for a cluster drones network using the MAVLink (Micro Air Vehicle Link) application protocol based on FANET (Flying Ad-hoc Network), which is composed of ad-hoc networks with multiple drones for IoT services such as remote sensing or disaster monitoring. Here, the drones belonging to the cluster construct a FANET network acting as WTRP (Wireless Token Ring Protocol) MAC protocol. Under this network environment, we propose an efficient algorithm applying the Lightweight Encryption Algorithm (LEA) to the CTR (Counter) operation mode of WPA2 (WiFi Protected Access 2) to encrypt the transmitted data through the MAVLink application. And we study how to apply LEA based on CBC (Cipher Block Chaining) operation mode used in WPA2 for message security tag generation. In addition, a modified Diffie-Hellman key exchange method is approached to generate a new key used for encryption and security tag generation. The proposed method and similar methods are compared and analyzed in terms of efficiency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.645-648
• /
• 2007

This paper describes database server management system by mobile device. Our system can control database server immediately in any where by mobile device. We have developed the dataset server CE which interface with mobile device, database management system which rons in mobile device and web services which connect the mobile database with desktop database. External mobile device communicate with web service agent via wireless equipment. Our system includes dataset server CE client engine, web service server agent and mobile device management system. Through the test by an application program, we have confirmed that our system operates very well each others.