• Journal of Information Technology Services
• /
• v.16 no.4
• /
• pp.223-234
• /
• 2017

The audible pedestrian signal (APS) is an add-on device which connects to the pedestrian signaling device and informs the contents and changes of the signaling by sound. It provides walking direction information of the pedestrian crossing so that the blind people can safely cross the pedestrian crossing. In an intersection where a plurality of audible pedestrian signal (APS) are installed at an intersection crosswalk, existing audible pedestrian signal (APS) operate simultaneously in the communication radius of a wireless remote controller, which may cause confusion for the blind people and the public may complain about the noise. In this paper, we developed a BLE (Bluetooth Low Energy)-based audible pedestrian signal (APS) system capable of supporting two-way communications with a smart-phone that can cross the intersection safely and improve the walking comfort and traffic safety for the blind people. The proposed method is a method in which the BLE beacon communication based audible pedestrian signal (APS) presents active service to the blind people, and the existing audible pedestrian signal (APS) is a way of requesting the passive service by the blind people with the wireless remote control by the unidirectional communication based on 358Mhz. The developed system is installed in the crossroad of Doma-dong, Seo-gu, Daejeon, and it is tested and operated by the blind people. The satisfaction evaluation and analysis of the audible pedestrian signal (APS) for the blind people have good results and are planned to be expanded in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

In order to control moving facilities on a remote place effectively, it are required to acquire a environment informations such as images where the moving facilities are placed. However, since there is no tools to acquire such informations to the central control system based on the non-networked sensor environments, it is difficult to control the moving facilities remotely. Therefore, we design and implement the Zigbee based image transmission system and communication protocol to control the moving target remotely. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented Zigbee based control systems and communication protocol have the normal and replay function for a realtime control of the moving target under the server PC and the mobile FDA with the WiFi protocol. The functional operability and performance are analyzed by a designed prototype under the wireless home network environment.

• Journal of Digital Contents Society
• /
• v.18 no.4
• /
• pp.761-768
• /
• 2017

As the loss prevention system using bluetooth has a short communication range, it has a problem which its location is not known if it is strayed out of a certain distance. To overcome shortcoming of such an existing loss prevention system, this paper proposes a GPS-based wireless loss prevention system without communication fee using the LoRa Communication with a long distance. The proposed system performs a remote control application on the smart-phone and then is able to get a long-distance GPS coordinates about the location of the loss prevention system on the google map. For performance evaluation of the implemented proposed system, the experiments for transmitting and receiving data are done in open terrain, indoor and outdoor areas and the experiment results identified the superiority of the proposed system in the long-distance.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.1-9
• /
• 2010

This paper describes parallel event-driven remote IT convergence applications which are a combination of traditional industry and IT Technology including advanced communication. In IT convergence system, events can occur currently from many sensors of devices or users. And IT convergence system must have a parallel processing method. In this paper, the parallel processing method was implemented using a thread and we developed a connection method between a device and a mode of communication which is a wireless communication or a power line communication. In addition to that, we developed object modeling, device, user and event modeling, based on XML (eXtensible Markup Language) using object-oriented modeling method. To efficiently show results in real time, systems provide various graphic user interfaces such as a bar graph, a table, and a combination of the two.

• International Journal of Computer Science & Network Security
• /
• v.23 no.12
• /
• pp.235-245
• /
• 2023

Smart applications based on the Network of Everything also known as Internet of Everything (IoE) are increasing popularity as network connectivity requires rise further. As a result, there will be a greater need for developing 6G technologies for wireless communications in order to overcome the primary limitations of visible 5G networks. Furthermore, implementing neural networks into 6G will bring remedies for the most complex optimizing networks challenges. Future 6G mobile phone networks must handle huge applications that require data and an increasing amount of users. With a ten-year time skyline from thought to the real world, it is presently time for pondering what 6th era (6G) remote correspondence will be just before 5G application. In this article, we talk about 6G dreams to clear the street for the headway of 6G and then some. We start with the conversation of imaginative 5G organizations and afterward underline the need of exploring 6G. Treating proceeding and impending remote organization improvement in a serious way, we expect 6G to contain three critical components: cell phones super broadband, very The Web of Things (or IoT and falsely clever (artificial intelligence). The 6G project is currently in its early phases, and people everywhere must envision and come up with its conceptualization, realization, implementation, and use cases. To that aim, this article presents an environment for Presented Distributed Artificial Intelligence as-a-Services (DAIaaS) supplying in IoE and 6G applications. The case histories and the DAIaaS architecture have been evaluated in terms of from end to end latency and bandwidth consumption, use of energy, and cost savings, with suggestion to improve efficiency.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.552-558
• /
• 2014

This paper suggests how to design a ZigBee-chip-based communication module to remotely measure radiation level. The suggested communication module consists of two control processors for the chip as generally required to configure a ZigBee system, and one chip module to configure a ZigBee RF device. The ZigBee-chip-based communication module for remote radiation measurement consists of a wireless communication controller; sensor and high-voltage generator; charger and power supply circuit; wired communication part; and RF circuit and antenna. The wireless communication controller is to control wireless communication for ZigBee and to measure radiation level remotely. The sensor and high-voltage generator generates 500 V in two consecutive series to amplify and filter pulses of radiation detected by G-M Tube. The charger and power supply circuit part is to charge lithium-ion battery and supply power to one-chip processors. The wired communication part serves as a RS-485/422 interface to enable USB interface and wired remote communication for interfacing with PC and debugging. RF circuit and antenna applies an RLC passive component for chip antenna to configure BALUN and antenna impedance matching circuit, allowing wireless communication. After configuring the ZigBee-chip-based communication module, tests were conducted to measure radiation level remotely: data were successfully transmitted in 10-meter and 100-meter distances, measuring radiation level in a remote condition. The communication module allows an environment where radiation level can be remotely measured in an economically beneficial way as it not only consumes less electricity but also costs less. By securing linearity of a radiation measuring device and by minimizing the device itself, it is possible to set up an environment where radiation can be measured in a reliable manner, and radiation level is monitored real-time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.67-73
• /
• 2016

Recently, wireless power transmission has attracted much interest and is the subject of much research in industry and academia. As its name implies, it is a technology which involves transferring power without wires. This paper presents the design of an ICT-based wireless power transmission system. The proposed system consists of a wireless transceiver unit and high-efficiency coil unit, which can increase both the transmission efficiency and the effective power distance. In particular, the wireless transceiver unit was designed to work with the ICT technique to enable real-time remote monitoring. Also, studies were done relating to the effect of reducing the standby power. The optimal frequency of IGBT devices used in industrial wireless power systems of 20[KHz] was utilized. The values of $23.9[{\mu}H]$ and $2.64[{\mu}F]$ were selected for L and C, respectively, through many field experiments designed to optimize the system design. In addition, an output current controlling algorithm was developed for the purpose of reducing the standby power. The results presented in this paper represent a 75[%] to 85[%] higher power transmission efficiency with a 10[%] increase in the effective power transmission distance compared with the existing systems. As a result, the proposed system exhibits a lower standby power and maintenance costs. Also, the designed wireless transceiver unit facilitates fault detection by means of user acquired data with the development of the ICT applied program.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.147-154
• /
• 2009

Lately, superhigh speed network infra is developing with the fast speed, is evolved by step that existent appliances are digitalised and appliances are become remote control by being gear to network. Also, gearing in Home network and superhigh speed network infra, control appliances in Internet and research that do monitering is proceed. Therefore, describe about indoor environment automatic control system that use Wireless sensor and Microcontroler in this paper. Because using that electric power, Zigbee sensor and Wireless module, embodied system that measured in the room temperature and use ATmega128 Microcontroler and use each device (temperature, illumination, humidity) back in house and control humidifier, electric fan etc. Can use variously in Home network field by this Wireless sensor and Microcontroler base, and also can apply variously to several industry fields as well as Home network field.

• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.324-331
• /
• 2008

In this paper, we developed the crops monitoring system using wireless sensor networks. It can acquire the information about the cultivation environments from a temperature, humidity, illumination and soil sensor then use the detailed information for very useful. The acquisition about the cultivation environment information with wireless sensor networks can be made up an environment that an administrator is able to confirm the information and wherever in a remote place instead of conventional way visiting the cultivate place by investing a lot of money and time. Therefore, it could be saving money, time and effort, and reduced the damages from the natural disasters such as a cold-weather damage and drought. In addition, we could be possible preventing from the damages of blight and harmful insects according to the temperature by an analysis. In agriculture field, this system could be supported for making a foundation of the advanced technology developing endless, and, in IT field, it is look forward to preparing the opportunity which creates a new requirement on the new technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4186-4192
• /
• 2012

Because wind turbines are larger and more off-shore construction due to economic and environmental factors, it is more difficult to access the wind turbine as well as the necessary parts and the maintenance costs are increasing. So, we need to minimize fault elements and to prevent a secondary accident at failure through monitoring to reduce maintenance costs and to increase reliability of operation. In this paper we have implemented ZigBee based wireless sensor nodes and network for wind turbine condition monitoring using temperature, humidity, voltage, current, wind direction, and wind speed sensors. ZigBee wireless sensor nodes signals are transmitted to a central monitoring system via routers. Also, the sensor signals are collected and processed using LabVIEW program to monitor the wind turbine conveniently. The administrators and users can monitor the condition of wind turbine at remote site in real time over TCP/IP.