• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.461-467
• /
• 2014

This paper investigates using small UAVs as communications relay nodes for expanding communications links and improving communications quality, primarily for a fleet of ground or navy vessels. An airborne relay in ground/maritime space can effectively connect to units operating over the horizon, beyond normal communication range, or under limited satellite communication environment. Even if the equipment development is mature for communications relay, where to locate UAVs for efficient relay is still a pending question. With this background, this paper will develop high-level deployment algorithms to optimize the location of UAVs for improving the connectivity of a wireless network among a fleet of ground or navy vessels.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.114-125
• /
• 2006

Since wireless Internet services and small mobile communication devices come into wide use as well as the use of GPS is rapidly growing, researches on moving object, whose location information shifts sequently in accordance with time interval, are being carried out actively. Especially, the researches on vehicle moving object are applied to Advanced traveler information system, vehicle tracking system, and distribution transport system. These systems are very useful in searching previous positions, predicted future positions, the optimum course, and the shortest course of a vehicle by managing historical data of the vehicle movement. In addition, vehicle historical data are used for distribution transport plan and vehicle allocation. Vehicle historical data are stored at regular intervals, which can have a pattern. For example, a vehicle going repeatedly around a specific section follows a route very similar to another. If historical data of the vehicle with a repeated route course are stored at regular intervals, many redundant data occur, which result in much waste of storage. Therefore this thesis suggest a vehicle historical data store scheme for vehicles with a repeated route course using similar trajectory which efficiently store vehicle historical data.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.2
• /
• pp.15-24
• /
• 2016

GPS(Global Positioning System) location tracking is a method for taking the precise coordinates after the coordinates are obtained by a GPS receiver, and displaying them on the map. In this paper with WAVE(Wireless Access for Vehicular Environment) simulation, we show that various services such as vehicle tracking service, real-time road conditions service and logistics can go tracking service, control and operation services according to the vehicle position and the traveling direction by using the GPS position data. A vehicle tracking system using GPS is automatically able to manage multiple RCP when exchanging data between RMA and the RCP, and it provides rapid requests and responses. To verify that multiple sessions between RMA and RM, as well as multiple sessions between RMA and RCP are able to be implemented, we take RMA as a RCP application on an OBU, until the RMA is receiving data response from corresponding RM. As a result of this experiment, we show that the response speeds of single session between RMA and RM using 1, 2, 3, and 4 kbyte unit data are similar, 62.32ms, 62.65ms, 63.02ms, and 63.48ms, respectively. Likewise, those of 128 muliple sessions using 1, 2, 3, and 4 kbyte unit data are not much more time difference, 298.08ms, 302.21ms, 322.85ms, and 329.62ms, respectively.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.8-13
• /
• 2016

A buoy is a float attached by chain to the seabed to mark channels in a harbor or underwater hazards and can be classified into two major types as autonomous buoys and fixed buoys. When there is high demand such as marking channels in a harbor, monitoring ecology of ocean and environmental monitoring of coastal areas, smart buoys are developed. The smart buoys have wireless network systems such as GPS, CDMA and ZigBee. Using the GPS techniques, location and environments of buoy can be monitored and traced. However, the GPS in fixed buoy systems has a high power consumption and cost. Using many buoys on low power ZigBee basis allows dramatic reduction of the overall power consumption. In this study, it is aimed at the design of the trackable protocol for a buoy system which has low data rate and low power consumption. The proposed protocol has advantages that it can detect abnormal movement and gather trackable information without any system changes. In the introduced protocol, additional 2 bits and join request messages are used for trackable buoy system. The behaviors of improved protocol is modeled into petri-net and proved a reachability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.86-97
• /
• 2009

RTLS is a system for automatically locating and tracking people and objects. The TDOA-based RTLS determines the location of the tag by calculating the time differences of a signal received from the tag. In TDOA-based RTLS, time synchronization is essential to calculate the time difference between readers. This paper presents a precision time synchronization method for TDOA-based RTLS over IEEE 802.15.4. In order to achieve precision time synchronization in IEEE 802.15.4 radio, we analyzed the error factors of delay and jitter. We also deal with the implementation of hardware assisted time stamping and the Kalman filtering method to minimize the error factors. In addition, this paper described the experiments and performance evaluation of the proposed precision time synchronization method in IEEE 802.15.4 radio. The results show that the nodes in a network can maintain their clocks to within 10 nanoseconds offset from the reference clock.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.261-267
• /
• 2016

In this paper, we studied the range-free localization algorithm between sensor nodes based on the Radical Line for sensor networks. Routing in wireless sensor networks should reduce the overall energy consumption of the sensor network, or induce equivalent energy consumption of all the sensor nodes. In particular, when the amount of data to send more data, the energy consumption becomes worse. New methods have been proposed to address this. So as to allow evenly control the overall energy consumption. For this, the paper covers designing a localization algorithm that can obtain the location information of the peripheral nodes with fewer operations. For the operation of the algorithm is applicable Radical Line. The experimental environment is windows 7, the Visual C ++ 2010, MSSQL 2008. The experimental results could be localized to perform an error rate of 0.1837.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.389-395
• /
• 2012

U-City has been promoted nation-wide by development of recent IT technology. This paper studied the concept of 3D-virtual city in order to realize the current Ubiquitous City(U-City) efficiently, and to manage all the RFID/USN monitoring data in the real U-City. 3D-Virtual City is the concept of the reproduction of real world U-City, for embodying Ubiquitous technology while using Digital map, satellite image, VRML(Virtual Reality Modeling Language). U&V-City is the four-dimensional future city that real-time wire/wireless communication network and 3D-web GIS shall be connected that massive database, intelligent service be perceived through employing EAI(External Authoring Interface) that provides HTML&JAVA, and interface for efficient removal/process of massive information/ service and also by employing GPS/LBS/Navigation in support of world-wide orientation concept, and RTLS(Real Time Location System).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.307-309
• /
• 2013

Diligence/Indolence records are the basic data at a human resource management and the essential data for measure salaries of employees. However, since the D/I systems using RFIDs or biometric sensors require hish costs to build and operate the D/I systems, it is difficult for to small business or self-employed business to use them. In this paper, we propose the Diligence/Indolence system to use the location identification of a smart phon. To locate the position of an employee, the WiFi signal of a smart phone and the wireless access point are exploited. Because the pre-owned hardware resources are used and initial building costs are low, it is easy for small business to use the proposed D/I system with low cost.

• Spatial Information Research
• /
• v.16 no.2
• /
• pp.157-171
• /
• 2008

With emerging technologies on wireless networks and mobile computing environment, a number of researches have been carried out for ubiquitous computing. An important functional requirement of ubiquitous computing is to handle location data with ease. With the increase of accidents in large complex buildings. move attention is being paid to indoor spaces and evacuation. However, most currently used evacuation-related applications are simulation based on hypothetical data. Also, since they use non-georeferenced CAD data, it is not easy to integrate them with indoor positioning devices. With the recent progress of indoor positioning systems, the simulators can be enhanced to real-time evacuation systems. As a preliminary stage to make such systems possible, this study proposes using a georeferenced data and evacuation simulation. This study used GIS data and Cellular Automata theory an the algorithm for the movement of the evacuee.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.121-130
• /
• 2010

As the development of wireless environment and portable devices, navigation companies need more spatial information for Location Based Service and so they are investing heavily in this part. But my country have constructed lots of spatial dataset during the NGIS project, and then we can reduce costs by using constructed spatial dataset. The integration method of each building information between e-AIS and KLIS-rn is linked to designed mapping table by main building numbers and auxiliary cadastral number. e-AIS and KLIS-rn are integrated by the feature matching between CAD data and KLIS-rn. Due to the limitation of test data, more accuracy test will be required with various data sets.