• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1273-1278
• /
• 2005

In this thesis, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TE_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of TE modes. The size and location of intercavity slot is determined by the coupling equation from E- and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.105-117
• /
• 2004

CVO(Commercial Vehicle Operations) of Intelligent Transport Systems is the system to manage effciently cargo distribution as providing at real time the information of cargo location and situation through nS and GPS technology. In this paper, we proposed the Gate Automation System of harbors among AVI/AEI. To implement this system, we use the DSRC(Dedicated Short Range Communication) which adopts an wireless communication between RSE(Road-side Equipment) and OBE(on-Board Equipment) on a vehicle. When constructing the automation gateway system of harbors, the business application ability are reviewed practically and the logistics facilities to be constructed in the near future nay use this paper results according to the international standard and it could help complete integrated logistics system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.19-28
• /
• 2006

In the IEEE 802.15.4a system, they require simple, economical and low power consumption transmitter and receiver to transmit low rate data and to identify distance and location. To meet these requirements, LR-WPAN system use transmitter and receiver with simple modulation and demodulation scheme. In this paper, use PPM+BPSK modulation and windowing scheme to overcome multipath fading effect. Then we apply this channel estimation scheme to LR-WPAN system and compare performance depends on transmitter scheme. Proposed method using preamble to find channel characteristic out and we compensate distorted data with that information. Therefore we can detect signal easily at the demodulation part. Simulation result shows that performance evaluation is greater at the NLOS channel than LOS channel no matter what the receiver scheme.

• Journal of KIISE
• /
• v.44 no.9
• /
• pp.966-975
• /
• 2017

In Internet of Things (IoT), the aim of the nodes (called 'Things') is to exchange information with each other, whereby they gather and share information with each other through self decision-making. Therefore, we cannot apply existing aggregation algorithms of Wireless sensor networks that aim to transmit information to only a sink node or a central server, directly to the IoT environment. In addition, since existing algorithms aggregate information from all sensor nodes, problems can arise including an increasing number of transmissions and increasing transmission delay and energy consumption. In this paper, we propose the clustering and property based data exchange method for energy efficient information sharing. First, the proposed method assigns the properties of each node, including the sensing data and unique resource. The property determines whether the node can respond to the query requested from the other node. Second, a cluster network is constructed considering the location and energy consumption. Finally, the nodes communicate with each other efficiently using the properties. For the performance evaluation, TOSSIM was used to measure the network lifetime and average energy consumption.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.109-117
• /
• 2016

The most important mission of RFID reader is identify EPC (Electronic Product Code) of RFID tag of products that located within distinguishable range of RFID reader. RFID reader transmits query message to RFID tags through wireless channel and RFID tags send unique EPC to response its query message simultaneously. therefore tag collision occurred frequently. RFID tags collision resolution algorithm required to apply RFID technology to various industries. In this paper, we propose enhanced M-ary algorithm that collision bits location is used by not only RFID reader but also tags. the main feature of the proposed algorithm is that integrate multiple query message of M-ary QT algorithm to the single query message by analyze multiple response messages from tags. the simulation results show that the proposed algorithm give better performance than M-ary QT algorithm in terms of the number of query-response, identification efficiency and communication overhead.

• Journal of the HCI Society of Korea
• /
• v.8 no.2
• /
• pp.1-8
• /
• 2013

In previous study, we developed a guidance system outdoors for person with visual impairment to be able to walk safely to the destination. The volunteers are exposed to dangerous situations since they are performed to the experiments in the outdoors. In order to solve the problem, we propose an interactive application that monitors the volunteer wearing guidance system and warns remotely the volunteer about dangerous situations. The application is used to remote wireless communication with guidance system through Bluetooth module that is built in a laptop computer, without additional device. Therefore, we can monitor in real time user's location and guided contents to user, and it is possible to check a path to the destination and POI (Point of Interest) coordinate values. As using a proposed monitoring application, it is possible to perform safe experiment with the rapid situation awareness and fast detection of dangerous.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.790-796
• /
• 2005

In order to accomplish a wireless communication of capsule endoscopy, an environment study in the human body and receiving antenna design have been performed. The proposed antenna is the loop antenna designed to minimize the propagation loss in multi-loss layer such as the human body and utilize the magnetic field. Considering the propagation loss in the human body, the frequency range is from 400 MHz to 500 MHz. Acorrrding to the FCC regulations, the permittivity and conductivity for each human tissue were extracted. We set up an equivalent model and make an aqueous solution which is replaced with the human body. Due to movement of capsule in the human body which propagation loss is extremly severe, an array antenna is required. Irrespective of the location of transmission antenna transmitting a signal of 1 mW, we confirme what it is possible for the enough signal detection as the average signal level of array antenna is -60 dBm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.743-750
• /
• 2016

The conventional track to train communication is commonly using radio based equipment such as transponder or balise to transmit the data. However, there are some drawbacks of the conventional equipment, for example multipath fading, source of bandwidth limitation, and interference from other users. Moreover, the radio based equipment is very expensive when installed in large numbers. To address these problems, we propose infrared system for trackside to train communication system. Infrared system offers a transmission of data to train and it can be processed to obtain at least a train location. Infrared communication protocol provides practical wireless data communication for direct dedication configuration. Furthermore, on the pole configuration the infrared system provides an abundant bandwidth, an economically sensible, minimalized installation of equipment on the trackside and reliability for heavy rain environment. This paper concentrates on the communication function and measurement performance evaluation. The proposed trackside to train communication system covers about 6 meters between infrared receiver and infrared transmitter, whereas the half angle of the transmitter is set to $19.65^{\circ}$ and the receiver angle is $15^{\circ}$.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.301-307
• /
• 2012

The development of mobile devices and the spread of wireless network help share and exchange information and resources more easily. The bond them to Cloud Computing technology help pay attention to "Mobile Cloud" service, so there have been being a lot of studies on "Mobile Cloud" service. Especially, the important of 'Personalization Service' which is customized for each user's preference and context has been increasing. In order to provide appropriate personalization services, it enables to recognize user's current state, analyze the user's profile like user's tendency and preference, and draw the service answering the user's request. Most existing frameworks, however, are not very suitable for mobile devices because they were proposed on the web-based. And other context information except location information among user's context information are not much considered. Therefore, this paper proposed the context-aware framework, which provides more suitable services by using user's context and profile.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.7
• /
• pp.1329-1345
• /
• 2011

After the 9.11 terror attack, lawful Interception (LI) has emerged as an important tool for anti-terrorist activity. Law enforcement agents and administrative government bodies effectively monitor suspicious target users of permanent IP-based network devices by LI in Packet Data Networks (PDNs). However, it is difficult to perform LI in monitoring migrating users from a location to another, who change their IPs due to the proliferation of portable Internet devices enabling 3G IP Multimedia Subsystems (IMS). The existing, manual handover technique in 3G IMS makes it even more difficult to continue the LI activities due to time-lag reissuance of LI authority warrants when the target users move to a new LI jurisdiction via a roaming service. Our proposed model is a seamless LI handover mechanism in 3G IMS to support mobility detection of the target users. The LI warrants are transferred to the new LI agent automatically with the target users when they move to a new LI jurisdiction. Thus, time-lag human intervention of reissuance of the LI warrants is removed and enables the LI authorities to continue monitoring. In the simulation of our proposed mechanism, the quality of lawful interception achieves a mean score of over 97.5% out of the possible 100% maximum score, whereas the quality of the existing mechanism has a mean score of 22.725%.