• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.580-585
• /
• 2009

Real Time Locating Systems (RTLS) are used to track and identify the location of objects in real time using simple, inexpensive tags attached to or embedded in objects and readers that receive the wireless signals from these tags to determine their locations. A tag is powered an internal source such as a battery. The blink frequency of a tag affects the energy efficiency and the locating accuracy of RTLS. The mobility of a tag also affects the locating accuracy. In this paper, we introduce a RTLS tag design which improves the locating accuracy and the power efficiency. We propose an adaptive transmission-rate control algorithm using a motion sensor. By analyzing the signal pattern of the motion sensor, we can build a model to estimate the speed of the motion. Using this model, our algorithm can achieve better locating accuracy and lower power consumption than those of the conventional method. In our experiments, the number of transmission reduced as 40%, keeping similar locating accuracy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.959-968
• /
• 2019

In the agricultural industry, wireless sensor network technology has being applied by utilizing various sensors and embedded systems. In particular, a lot of researches are being conducted to diagnose diseases of crops early by using sensor network. There are some difficulties on traditional research how to diagnose crop diseases is not practical for agriculture. This paper proposes the algorithm which enables to investigate and analyze the crop leaf image taken by image camera and detect the infected area within the image. We applied the enhanced k-means clustering method to the images captured at horticulture facility and categorized the areas in the image. Then we used the edge detection and edge tracking scheme to decide whether the extracted areas are located in inside of leaf or not. The performance was evaluated using the images capturing tomato leaves. The results of performance evaluation shows that the proposed algorithm outperforms the traditional algorithms in terms of classification capability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.152-164
• /
• 2015

A rapid development of semiconductors, sensors and mobile network technologies has enable that the embedded device includes high sensitivity sensors, wireless communication modules and a video processing module for vehicular environment, and many researchers have been actively studying the smart car technology combined on the high performance embedded devices. The vehicle is increased as the development of society, and the risk of accidents is increasing gradually. Thus, the advanced driver assistance system providing the vehicular status and the surrounding environment of the vehicle to the driver using various sensor data is actively studied. In this paper, we design and implement the smart vehicular camera device providing the V2X communication and gathering environment information. And we studied the method to create the metadata from a received video data and sensor data using video analysis algorithm. In addition, we invent S-ROI, D-ROI methods that set a region of interest in a video frame to improve calculation performance. We performed the performance evaluation for two ROI methods. As the result, we confirmed the video processing speed that S-ROI is 3.0 times and D-ROI is 4.8 times better than a full frame analysis.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.94-105
• /
• 2008

Numerous platforms have been developed for ZigBee-based network embedded systems. Also, operating systems like TinyOS have been installed to facilitate efficient implementation of wireless sensor network applications which collect data, and/or execute commands. First of all, porting an operating system on a new platform may need invention of a substitute for a required but unsupported hardware component. This paper presents a multiplexed virtual system timer for a platform without a counter comparator which we have contrived to emulate by using an extra counter. Such porting also injects unexpected faults which cause a variety of painful failures. Unfortunately, TinyOS requires to handle a lot of asynchronous hardware interrupts which are hard to trace during debugging. Besides, simulators are not available for a new platform since the models of hardware on the platform are not usually developed, yet. We propose novel instrumentation techniques which can be used to effectively trace the bugs in such lack of debugging environment. These techniques are used to identify and fix a great deal of nasty issues in porting TinyOS 2.0 on MG2400 and MG2455 platforms made by RadioPulse Inc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.842-855
• /
• 2014

Recently, the progress of smart phone market has retarded by oversupply therefore wearable computer has been the focus of new growth engine. Wearable computing system is a complex fusion of a variety of technologies such as wireless network, embedded, sensor and new material. Because these technologies involves utilization and mobility in addition to quality characteristic in existing software, application of ISO/IEC 9126 is not perfect when assessing quality of wearable computer. In this study, author suggested new quality assessment model for wearable computer by sorting quality attribute in ISO/IEC 9126 and adding new quality attribute. For this, author investigated features and functional requirements related to wearable computer. and then author suggested quality standard and metrics by identifying quality characteristic. Author confirmed practicality of quality assessment model by using suggested model in scenario and comparing quality assessment of three goods such as company S, L, G. This quality assessment model is expected to use guidelines for assessing quality of wearable computer.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.165-177
• /
• 2015

Purpose: Accurate monitoring of soil strength is a key technology applicable to various precision agricultural practices. Soil strength has been traditionally measured using a cone penetrometer, which is time-consuming and expensive, making it difficult to obtain the spatial data required for precision agriculture. To improve the current, inefficient method of measuring soil strength, our objective was to develop and evaluate an in-situ system that could measure horizontal soil strength in real-time, while moving across a soil bin. Methods: Multiple cone-shape penetrometers were horizontally assembled at the front of a vertical plow blade at intervals of 5 cm. Each penetrometer was directly connected to a load cell, which measured loads of 0-2.54 kN. In order to process the digital signals from every individual transducer concurrently, a microcontroller was embedded into the measurement system. Wireless data communication was used between a data storage device and this real-time horizontal soil strength (RHSS) measurement system travelling at 0.5 m/s through an indoor experimental soil bin. The horizontal soil strength index (HSSI) measured by the developed system was compared with the cone index (CI) measured by a traditional cone penetrometer. Results: The coefficient of determination between the CI and the HSSI at depths of 5 cm and 10 cm ($r^2=0.67$ and 0.88, respectively) were relatively less than those measured below 20 cm ($r^2{\geq}0.93$). Additionally, the measured HSSIs were typically greater than the CIs for a given numbers of compactor operations. For an all-depth regression, the coefficient of determination was 0.94, with a RMSE of 0.23. Conclusions: A HSSI measurement system was evaluated in comparison with the conventional soil strength measurement system, CI. Further study is needed, in the form of field tests, on this real-time measurement and control system, which would be applied to precision agriculture.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.331-335
• /
• 2016

When a boating accident, such as a January number three, the customer's risk management issues emerged. Ships and accident risk in confined spaces such as risk management to locate the customer and dangers of probation is available. In this paper, aboard after consent to obtain information for customers to wrist to customers, webbing or portable device embedded in devices and Wireless sensor information Input was attached, disposable consumer information. Customer on board the ship setting for location analysis and positioning according to information communication protocol, ships, each customer's real-time location information on the screen, 3 the foundation of d customers on the floor Can be designed to inform. Threshold designed to reduce the error of the information to analyze the position in current position and errors. Also, to system attacks would control the situation of accident and emergency jaenanguk server with real-time information transmission of information outside the emergency during a disaster, search and Disaster relief to be possible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1925-1936
• /
• 2010

In this paper, multi-legged robot was designed and produced using stable walking pattern algorithm. The robot had embedded camera and wireless communication function and it is possible to recognize both hand posture and obstacles. The algorithm decided moving paths, and recognized and avoided obstacles through Hough Transform using Edge Detection of inputed image from image sensor. The robot can be controlled by hand posture using Mahalanobis Distance and average value of skin's color pixel, which is previously learned in order to decide the destination. The developed system has shown obstacle detection rate of 96% and hand posture recognition rate of 94%.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.63-70
• /
• 2011

A bicycle is different from vehicles in the structure that a rider is fully exposed to the surrounding environment. Therefore, it needs to make use of prior information about local weather, air quality, trail road condition. Moreover, since it depends on human power for moving, it should acquire route property such as hill slope, winding, and road surface to improve its efficiency in everyday use. Recent mobile applications which are to be used during bicycle riding let us aware of the necessity of development of intelligent bicycles. This study aims to develop a riding state (up-hill, down-hill, accelerating, braking) recognition algorithm using a low-power wrist watch type embedded system which has 3-axis accelerometer and wireless communication capability. The developed algorithm was applied to 19 experimental riding data and showed more than 95% of correct recognition over 83.3% of the total dataset. The altitude and temperature sensor also in the embedded system mounted on the bicycle is being used to improve the accuracy of the algorithm. The developed riding state recognition algorithm is expected to be a platform technology for intelligent bicycle interface system.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.297-302
• /
• 2008

In case of display a lot of information from mobile devices, those systems are being developed that display the information from mobile devices on remote devices such as TV using the mobile devices as remote controllers because it is difficult to display a lot of information on mobile devices due to their limited bandwidth and small screen sizes. A lot of cost is required to design and develop interfaces for these systems corresponding to each of remote display devices. In this paper, a mobile environment based remote display system for displays at real times is proposed for continuous monitoring of status data for unique 'Mote IDs'. Also, remote data are collected and monitored through sensor network devices such as ZigbeX by applying status perception based remote displays at real times through processing ubiquitous computing environment data, and remote display applications at real times are implemented through PDA wireless mobiles. The system proposed in this paper consists of a PDA for remote display and control, mote embedded applications programming for data collections and radio frequency, server modules to analyze and process collected data and virtual prototyping for monitoring and controls by virtual machines. The result of the implementations indicates that this system not only provides a good mobility from a human oriented viewpoint and a good usability of accesses to information but also transmits data efficiently.