• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.221-231
• /
• 2015

This paper provides the trend of Internet of Things (IoT) for smart healthcare services and applications. IoT has provided a promising opportunity to build intelligent healthcare system and smart wearable applications by using the growing capability of wireless mobile devices, interactive sensors/actuators, and RFID technologies. For analysis of state-of-art technology of smart healthcare system, this paper includes comparative analysis and investigation of existing standard, network protocol, and devices, etc. In this paper, we examine the market trend of IoT healthcare. In particular, we examine the variety of IoT based healthcare type such as mobile, wearable device. After that, we examine the technologies of IoT healthcare such as standard, sensor, network and security. This survey contributes to better understanding of the challenges in existing IoT healthcare and further new light on future research directions.

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.1-5
• /
• 2013

This study proposes a remote monitoring of patients and emergency notification system with a camera and pulse wave sensor for U-Healthcare. The proposed system is a server client model based U-Healthcare system which consists of wireless clients that have micro-controller, embedded-board for patient status monitoring and a remote management server. The remote management server observes the change of pulse wave data individually in real-time sent from the clients that is to be remote-monitored based on the pulse wave data stored by users and divides them into caution section and emergency section. When the pulse wave data of a user enters an emergency situation, the administrator can make a decision based on the real-time image information and pulse rate variability. When the status of the monitored patient enters the emergency section, the proposed U-healthcare system notifies the administrator and relevant institutions. An experiment was conducted to demonstrate the pulse wave recognition of the proposed system.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.35.3-36
• /
• 2008

The ground-based spacecraft simulator is a useful tool to realize various space missions and satellite formation flying in the future. Also, the spacecraft simulator can be used to develop and verify new control laws required by modern spacecraft applications. In this research, therefore, Hardware-in-the-loop (HIL) simulator which can be demonstrated the experimental validation of the theoretical results is designed and developed. The main components of the HIL simulator which we focused on are the thruster system to attitude control and automatic mass-balancing for elimination of gravity torques. To control the attitude of the spacecraft simulator, 8 thrusters which using the cold gas (N2) are aligned with roll, pitch and yaw axis. Also Linear actuators are applied to the HIL simulator for automatic mass balancing system to compensate for the center of mass offset from the center of rotation. Addition to the thruster control system and Linear actuators, the HIL simulator for spacecraft attitude control includes an embedded computer (Onboard PC) for simulator system control, Host PC for simulator health monitoring, command and post analysis, wireless adapter for wireless network, rate gyro sensor to measure 3-axis attitude of the simulator, inclinometer to measure horizontality and battery sets to independently supply power only for the simulator. Finally, we present some experimental results from the application of the controller on the spacecraft simulator.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.47-58
• /
• 2009

In this study, a Hardware-In-the-Loop (HIL) simulator using thrusters is developed to validate the spacecraft attitude system. To control the attitude of the simulator, eight cold gas thrusters are aligned with roll, pitch and yaw axis. Also linear actuators are applied to the HIL simulator for automatic mass balancing to compensate the center of mass offset from the center of rotation. The HIL simulator consists of an embedded computer (Onboard PC) for simulator system control, a wireless adapter for wireless network, a rate gyro sensor to measure 3-axis attitude of the simulator, an inclinometer to measure horizontal attitude, and a battery set to supply power for the simulator independently. For the performance test of the HIL simulator, a bang-bang controller and Pulse-Width Pulse-Frequency (PWPF) modulator are evaluated successfully. The maneuver of 68 deg. in yaw axis is tested for the comparison of the both controllers. The settling time of the bang -bang controller is faster than that of the PWPF modulator by six seconds in the experiment. The required fuel of the PWPF modulator is used as much as 51% of bang-bang controller in the experiment. Overall, the HIL simulator is appropriately developed to validate the control algorithms using thrusters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.117-124
• /
• 2009

In this paper, we have developed communication modules for ubiquitous transportation sensor network (u-TSN). The developed module can be used for intelligent transportation services. The developed systems are based on IEEE 802.11a and IEEE 802.11g technologies for vehicle and infrastructure systems, respectively. We have found that the throughput for the developed systems is at maximum around 15 Mbps. It is reduced to 10 Mbps at a long distance and high speed condition. The performance is enough to support traffic control services in dense traffic condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.925-932
• /
• 2009

Precise temperature monitoring is the major preconditioning to supervise quality losses within the transport chain for fresh products. ISO/IEC18000-6REV1 defines new protocols supporting BAP(Battery Assisted Passive) RFID tag which is completely compatible with EPCglobal Class1 Generation2 specification. In this paper, we designed a modem supporting BAP RFID tag with FPGA(Field Programmable Gate Array) and implemented sensor data processing function defined in ISO/IEC18000-6REV1. The transmit block of the modem supports pulse shaping filter and the output signal of the implemented RFID reader is satisfied with the spectrum mask defined in the standard. The receive block of the modem uses Gardner TED to synchronize timing of symbol. In this paper, we designed a modem supporting ISO/IEC18000-6REV1 standard and developed a RFID reader sndard. The developed RFID reader sndard can recognize sensor tag and passive tag in the wireless environment and supports real-time processing of the sensor data in the embedded linux platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.1022-1029
• /
• 2009

What Ubiquitous means "being or existing anywhere, anytime"in Latin, which is, in other words, the users are able to access the network no matter where they are, what kind of network or computer terminals they use. This paper focuses on the implementation of hardware system. The first part of the sytem is the sensor node which transmits the sensor data from node to ARM11 platform through the Zigbee network wirelessly. The other part of the system is the ARM11 platform which receives and displays the sensor data. ARM11 platform is sink node. The ARM11 platform is based on ARM11 architecture and ported with Linux OS. Qtopia is used as Window Manager in order to make applications. The highly efficient ARM11 processor, S3C6400 MPC is the main part of the ARM11 platform.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.1-8
• /
• 2007

The Sensor Network enables many distributed systems to be unmanned and automated by using of diverse sensors as well as wireless communication technologies. One of major enabling technologies for the sensor network is the USN middleware which plays the role of collecting and analyzing of measurements of sensors and controlling of the environments. The paper deals with the fungus cultivating environment based on Sensor Networks. Especially, we focus on the design of USN middleware for the embedded system, and explain how to design software architecture in terms of architectural patterns. In this design process, the improvement of methodology for pattern-oriented architecture design is proposed and the quality attributes for the architecture design is newly classified and suggested for the reference of software architecture design.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.439-441
• /
• 2007

The seoul metropolitan subway has installed 8 lines and about 500 stations to transport 5 million passengers everyday. The underground air pollution level in the subway stations is very severe status, which is very harmful to the commutators and its personals. Although subway roles as such a massive and huge transportation system, the subway doesn't adapt yet any real-time air monitoring system. They have only some hand-held type detector equipments for monitoring air pollution. Therefore subway passengers are exposed to the harmful air pollution environment. The most harmful environmental parameters among the air pollution are known as the dust and sound noise dB level in the subway station. Because the dust is consisted of very small particles, we can't see them easily in dark condition on the platform, but it is very harmful. The monitoring system for air pollution is developed using embedded system attached with 6 different environmental sensors. This system monitors air pollution of dust sound noise, gas, temperature, humidity, inflammable gas, toxic gas in the subway ?station. The sensor unit of the ARM-CPU board and sensor transmits real time environmental data to the main server using Zigbee wireless communication module and TCP/IP network. The main control server receives and displays the real-time environmental data, and it send alarms to the personals when high level value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1048-1050
• /
• 2013

Mobile devices or smartphones are rapidly becoming the central computer and communication network device. Recently, smartphones are programmable and come with a growing set of cheap powerful embedded sensors, such as an accelerometer, digital compass, gyroscope, GPS, microphone, and camera. In this paper, we discuss the wireless gas sensing service architectural and develope the gas sensor monitoring services using smartphone and web server.