• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1471-1478
• /
• 2016

In this study, the system to manage the power automatically was implemented by using Arduino, Raspberry pi, and Beacon technologies. Before the research, pre-research was carried out with the analysis on the existing power management systems in the market in order to find a solution to reduce burdens from standby power and power waste with the increase of electric charges. The system is designed to be able to deliver and receive data through IEEE 802.15.4 wireless protocol, by using Xbee module. Arduino was tested to verify whether it is able to control SSR(Solid State Relay), and it was found that there is no problem. Meanwhile, it was also tested whether it is possible to organize a star topology network through Arduino and Raspberry Pi, and it was confirmed that normal wireless communication is possible through IEEE 802.15.4 wireless protocol. It is designed that the signal from Android smartphone application is to be delivered to Raspberry Pi and then, to be delivered to Arduino through Xbee so that Arduino could control SSR. In addition to this, wireless protocol required to control Arduino with Raspberry Pi is also designed and applied to this research.

• Journal of Biosystems Engineering
• /
• v.17 no.3
• /
• pp.213-222
• /
• 1992

To develop the wireless remote opreating system of walking rice transplanter, this study was carried out for manufacturing the wireless remote control system acting upon the transplanter. The first report of this study contained about the construction and operating method of a developed remote control system for 2-row walking type transplanter. It is the second report about the field test for an experimental transplanter being attached a wireless control system and for a conventional transplanter. The test was executed to investigate the characteristics of velocity, rectilinearity, turning time, interval of roots and of rows, and field capacity in accordance with various engine speeds for an experimental transplanter. The measurements of this test were compared with those of the conventional transplanter. The obtained results were as follows : 1. The operating velocity of the experimental transplanter was faster than the conventional one when the high speed range of the engine but the variances were very large. 2. The rectilinearity, interval of raws and of roots, and the turning time of the experimental transplanter was inferior to the conventional one at some speed ranges of the engine. 3. Field capacity of the experimental transplanter was superior to the conventional one at high speed of the engine. 4. There were some disadvantages for the experimental transplanter to operate, because it was constructed without any aid devices, such as float and hydraulic system for instance. But if the remote control system of this study equip at the modern walking transplanter, it will be improved and utilized without defects which was revealed from this test.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.218-220
• /
• 2005

In this paper, we have designed a home network system based on WIPI. WIPI (Wireless Internet Platform for Interoperability) is the standard specification for the mobile platform made by the Mobile Platform Special subcommittee of the Korea Wireless Internet Standardization Forum(KWISP). The system consists of three parts - a server, client, and simulator, and all parts are developed with JAVA. People can control household appliances anytime, anywhere by using cell phones which can use the wireless Internet, so the system offers convenience to people.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.19-27
• /
• 2013

This paper implements the standby power control system composed of a master device and slave devices. The standby power is managed by cutting power supply after controlling the relay of a slave device based on the authentication of master device's RFID card. RFID interface and wireless communication module are embedded in a master device, and one master device is linked with many slave devices in wireless. Each slave device executes the operation needed in power control independently. We implements the function of manual power on/off system in a slave device, and the function of user ID enrollment by switch manipulation in a master device. Also this system can communicate bidirectionally in wireless and runs on TinyOS. The result of experiment shows that the user authentication is executed in a master device and this authenticated information is transmitted to a slave device in wireless, and standby power is cutted by controlling the relay of a slave device. Installing this system in a building or an office, we can expect energy saving.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.103-109
• /
• 2020

This paper finds solutions for using ZigBee in wireless networked control system (WNCS). The round trip time delay and packet loss rate of the WNCS are measured. On the basis of these measured data, a playback buffer is used to solve the variable time delay in WNCS, and a Smith predictor is introduced to compensate for the time delay. The WNCS was able to be actually constructed to perform DC motor position control with 40 Hz sampling frequency.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2225-2227
• /
• 2001

A wireless communication module for multiple nearfiled measurement and control module was developed. The function of the developed system are dual communication, concurrent multiple communication, PLC control, and A/D, D/A converting. The multiple communication approach is based on master-slave with sub-polling scanning concept.

• Journal of Korea Multimedia Society
• /
• v.10 no.6
• /
• pp.745-753
• /
• 2007

The wireless medium is known to be time-varying which could affect and result to a poor network's performance. As a solution, an opportunistic scheduling and power control algorithm based on IEEE 802.11 MAC protocol is proposed in this paper. The algorithm opportunistically exploits the channel condition for better network performance. Convex optimization problems were also formulated i.e. the overall transmission power of the system is minimized and the "net-utility" of he system is maximized. We have proven that an optimal transmission power vector may exist, satisfying the maximum power and SINR constraints at all receivers, thereby minimizing overall transmission power and maximizing net-utility of the system.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.288-290
• /
• 2006

This paper presents the real-time water tank wireless control in a ship using duplex RF modules and PLC(Programmable logic Controller). The purpose of this paper is developing HMI(Human Machine Interface) for automation equipments. The system can low a cost because long wires are no more used. Analog signals of the water gauge and flow meter are changed to discrete signals by the micro-processor. The PLC checks the volume of water and runs On or Off of the valve and pump. Duplex RF modules send and receive data between the water tank and control room. Everywhere the Internet is used, operators are able to check the status of the system by the web-server.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.4
• /
• pp.445-459
• /
• 2008

This paper addresses a call admission control(CAC) scheme giving handoff calls a priority over new calls for OFDMA wireless communication systems. The characteristics of OFDMA system and a variety of user QoS (Quality of Service) requirements are incorporated into the proposed CAC scheme which consists of several optimization modules for the system resource(subcarriers and power) allocations. The mathematical models and its solution methods for the embedded resource allocation problems are proposed. Some extensive computational experiments are conducted to illustrate the superiority of our CAC.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1680-1684
• /
• 2010

CBTC(Communication-Based Train Control) system which is based on wireless communication can provide high density operation of the train using location tracking between ground and onboard train. It can also reduces maintenance expense because it does not require the ground equipment for tracking circuit and signal flag and so on. Recently, research and interest have been done on CBTC system. The high-speed trains up to 300km/h experience multi-path fading channel which bring about the performance degradation of wireless CBTC system. In this paper, we consider MIMO (Multi-Input Multi-Output) antenna-based CBTC system for trains with Alamoutip-type space-time diversity transmission for reliable communication. Also we model a channel considering practical environment and evaluate performance improvement of proposed CBTC system.