• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2008

Once the sensor node in wireless sensor networks is installed, it usually operates without human intervention for a long time. The remote code update scheme is required because it is difficult to recall the sensor node in many situations. Therefore, studies on the reliable and efficient transport protocol for code propagation in wireless sensor networks have been increasingly done. However, by considering only the stability aspect of transmission, most of previous works ignore the consideration on the fast code propagation. This results the energy inefficiency by consuming unnecessary energy due to the slow code propagation. In this paper, in order to overcome limitation of the previous code propagation protocols, we propose a new code propagation protocol called "FCPP(Fast Code Propagation Protocol)". The FCPP aims at improving the reliability at well as performance. For this purpose, the FCPP accomplishes the fast code propagation by using the RTT-based transmission rate control and NACK suppression scheme, which provides a better the network utilization and avoids a unnecessary transmission delay. Based on the ns-2 simulation result, we prove that the FCPP Improves significantly both reliability and performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.993-1003
• /
• 2012

In this paper, we propose a method that wireless mobile nodes can obtain high throughput in heterogeneous wireless networks using multiple connections and it has low packet loses under handover situation. Currently, a mobile node exchanges data with server for one network connection. The proposed method can use high throughput because it doesn't only use one network(WLAN, 3G, etc.) but also use multiple wireless networks. When mobile nodes move to area to use multiple connection, mobile nodes request heterogeneous wireless networks using multiple connections message from the server and the server transmit packets using multiple connections. Also, this method doesn't disconnect previous networks, so packets losses are decreased. Using the NS-2 simulation, we verify that the propose method enhances throughput.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.797-800
• /
• 2011

The objective of MPEG Media Transport (MMT), which is on going standard, is to develop efficient delivery of media over packet based networks in an adaptive, progressive, download/streaming fashion over various IP based networks, including terrestrial, satellite and cable broadcast networks. In this paper we introduce utilization of signal strength information based on Cross Layer Design(CLD) to efficient multimedia delivery over wireless network in which in practice the wireless conditions can vary significantly. Many recent studies have shown that a significant improvement in wireless video throughput can be achieved by utilizing signal strength information on CLD [1][2]. Despite of its usefulness, however, it was difficult to employ signal strength information in rate adaptation applications due to different representation of signal strength information for each underlying wireless network. To that end, we proposed syntax and semantics of signal strength information in such a way that the information can be interpreted in the unified way. The proposed signal strength information was proposed for the MMT standardization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.75-82
• /
• 2007

This paper proposes the way that reduces power consumption of the IEEE 802.15.4-based sensor network. To reduce power consumption, we consider following two schemes; first scheme is the Adaptive Beacon Interval Control. The next is the Adaptive Superframe Duration Control. Our results show that these guarantee reducing power consumption in ns-2 simulator.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.71-80
• /
• 2012

In this paper, applications that require low-speed data rate on personal area network to operate the Land Warrior system is proposed. These applications can refer to WSN(wireless sensor network) technology. However, this technology is not suitable to support various data transmission rate. A suitable CSMA/CA algorithm for Land Warrior System in order to solve these existing system problems is proposed. The proposed algorithm is designed to be variable CSMA/CA algorithm parameter, depending on data rate. For the evaluation of Land Warrior system model and CSMA/CA algorithm, we used Castalia. As a result of the simulation, it is found that the proposed system model can not only relieve loads of data processing, but also probability of collision was decreased.

• Journal of Convergence for Information Technology
• /
• v.9 no.10
• /
• pp.1-8
• /
• 2019

Generally, printers are common for users to use for public use over a wired or wireless local area network. The number of printers in the same network is increasing, and management of multiple printers is needed. To do this, a program that drives two or more printers and a computer connected by a wired or wireless network. When a computer's control department receives a print command for a designated file, it executes the steps of receiving status information from the printer, selecting the printer, and sending the print command execution. As a method of research, we presented a method for selecting differentiation from this study through prior art research and literature research. Therefore, the purpose of the study is to distribute smart print commands according to real-time status information of many printers to increase the efficiency of the printer's management, and to distribute print commands according to the cumulative and usable workload of many printers so that parts replacement of many printers can be instantaneously performed.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.277-285
• /
• 2002

This paper proposes and analyzes an error control scheme for the transmission control based real-time communication, such as FDDI, TDMA, and wireless LAN, which delivers the message according to the round robin fashion after the off-line bandwidth allocation. Taking into account the time constraint of each message, the proposed error control scheme makes the receiver transmit the error report via asynchronous traffic while the sender resend the requested message via overallocated access time which is inevitably introduced by the bandwidth allocation procedure for hard real -time guarantee. The error control procedure does not interfere other real -time message transmissions. In addition, as each frame contains the size of the message it belongs, the receiver can recognize the end of completion of message transmission. This enables earlier error report to the receiver so that the sender can cope with more network errors. The analysis results along with simulation performed via SMPL show that the proposed scheme is able to enhance the deadline meet ratio of messages by overcoming the network errors. Using the proposed error control scheme, the hard real -time network can be built at cost lower than, but performance comparable to the expensive dual link network.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.147-149
• /
• 2008

본 논문에서는 실제 센서네트워크 적용시 발생하는 다양한 간섭 문제를 완화할 수 있는 전송파워제어 알고리즘을 제안하고 있다. 제안한 알고리즘은 SINR 기반의 이론적 모델과 폐루프 제어방식을 이용하여 간섭 영향에 대하여 전송파워를 능동적으로 조절한다. 따라서 다양한 간섭의 영향 아래에서도 높은 전송률을 유지하면서, 동시에 에너지 소모를 크게 줄이도록 한다. 제안된 알고리즘은 실재 실험을 통하여 검증되었으며, 기존의 알고리즘에 비해서 높은 전송율과 에너지 효율을 보이고 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.267-268
• /
• 2011

Recent research activities in cooperative communication focus on achieving energy efficiency and reliability. Relay selection strategy for cooperative communication improves the performance significantly. However, due to imbalance consumption of power, network might die earlier and more than 90% energy remains unused. In this paper, we provide a framework of an energy-efficient medium access control protocol that minimizes these problems and improves energy efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2441-2446
• /
• 2009

Wireless Sensor Network collects a data from the specific area and the control is composed of small sensor nodes. Like this sensors to after that is established at the beginning are operated with the battery, the operational duration until several years must be continued from several months and will be able to apply the resources which is restricted in efficiently there must be. In this paper RHC (rounting history cache) applies in Directed Diffusion which apply a data central concept a reliability and an efficiency in data transfer course set. RHC algorithms which proposes each sensor node updated RHC of oneself with periodic and because storing the optimization course the course and, every event occurrence hour they reset the energy is wasted the fact that a reliability with minimization of duplication message improved.