• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1598-1601
• /
• 2005

In this paper, a heterogeneous home network control system using HNCP is proposed and implemented. A power line and 802.15.4 are used as media for the system. Information about home environment gathered by sensors is transferred to a power line connected device through the 802.15.4. HNCP stimulate the home network based on the both media. Sensor device definition for the HNCP address and message set is proposed. TinyOS supports the HNCP stack on the wireless sensor board. The home network control system implemented with these techniques has a benefit of user friendly operation of home appliances based on the sensing data. Implementation and experiment shows validity of the system.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.594-599
• /
• 2014

The routinized wireless devices such as smart phone have promoted to expand the use of IEEE 802.11 groups. The challenge environments of the wireless network utilizes effectively and user-oriented seamless services that handover is the most desirable issues under the wireless circumstance. In data center software defined network (SDN) has provided the flow routing to reduce costs and complexities. Flow routing has directly offered control for network administrator and has given to reduce delay for users. Under the circumstance of being short of network facilities, SDNs give the virtualization of network environments and to support out of the isolation traffic conditions. It shows that the mechanism of handover makes sure seamless services for higher density of the network infrastructure which is SDN to support network service re-configurable.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2387-2394
• /
• 2016

It is important to select the most appropriate channel for efficient transmission of massive data in wireless sensor network. In the fixed channel method for wireless sensor node, shortage of frequency may be a major constraint to support a variety of environments. In this paper, the method that seeks common channels between two nodes without common control channels in the existing wireless cognitive radio network is introduced in order to use efficiently the channel of wireless sensor network. The problem of existing method shows the severe degradation of performance that is caused by interference of linkage between selected channels, so that the sequential algorithm is suggested to improve the performance. From the results of computer simulation, the suggested method shows that the link can be set 50% faster than the other methods as the number of links increases because the beacon packet waiting time caused by the interference decreases remarkably.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.6
• /
• pp.31-39
• /
• 2016

In this paper, we propose a new system for wireless remote control over single-tasking operating systems such as Microsoft's disk operating system(DOS). In order to control a DOS device in a windows operating system, the proposed architecture uses a video transmitter, a virtual network driver, and a wireless keyboard module. Analysis shows that the proposed system, over 15Mbps wireless LAN(802.11n), can transmit at least 10 to 15 video frames, achieves speed up to a maximum of 8Mbps roughly, and is able to satisfy real time processing with respect to key input. Therefore, the proposed system is well suited to a remote control solution based on DOS devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1609-1617
• /
• 2013

TFRC(TCP-Friendly Rate Control) has a performance degradation in wireless networks because it performs congestion control by judging all the losses occurred in wireless networks as a congestion indicator. It is also degraded by the increased Round Trip Time(RTT) due to packet retransmission and contention overhead in the link layer. In this paper, we propose an adaptive rate control scheme based on cross-layer to improve the quality of streaming services in the wireless networks. It provides new RTT estimation and loss discrimination methods to improve transmission rate of TFRC. The simulation results show that the proposed scheme can improve the performance of TFRC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1935-1941
• /
• 2013

We can use NAT(Network Address Translation) technology to solve the lack of IP address. The problem of NAT traversal is happened when the filtering characteristics of NAT remove the packet that has no binding in the address translation table of NAT. There were many kinds of way to solve these problems by using additional device. Lately, network market is changed into integrating wired and wireless network by the IMS(IP Multimedia Subsystem). The IMS integrates to control network of wired and wireless network, has emerged to control convergence network effectively. Lately, the additional devices like IBCF(Interconnection Border Control Function) and IBGF(Interconnection Border Gateway Function) are used to solve the NAT traversal problem in the IMS. In this paper, we propose the solution of NAT traversal using P-CSCF without any additional equipment in the IMS.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1695-1700
• /
• 2011

In this paper, we introduce the network infrastructure in an advanced emu test line in Deabul. New technology has been applied to advanced EMU(DMU, integrated broadcasting system, black box and etc). In order to efficient and safely test of new developed train, failure, operation, status of test line and weather information should be monitored in real time. We has implemented a wireless and optical network infrastructure for reliability and scalability. The wireless communication capability between a car and ground is 20Mbps and back-hole network has 50Mbps of the communication performance. The network between test tracks and control office was established in the optical network. That can improve communication reliability.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.55-65
• /
• 2010

We present a method for increasing network lifetime without link failure due to lack of battery capacity of nodes in wireless ad-hoc networks with low mobility. In general, a node with larger remaining battery capacity represents the one with lesser traffic load. Thus, a modified AODV routing protocol is proposed to determine a possible route by considering a remaining battery capacity of a node. Besides, the total energy consumption of all nodes increase rapidly due to the huge amount of control packets which should be flooded into the network. To reduce such control packets efficiently, a source node can store information about alternative routes to the destination node into its routing table. When a link failure happens, the source node should retrieve the route first with the largest amount of the total remaining battery capacity from its table entries before initiating the route rediscovery process. To do so, the possibility of generating unnecessary AODV control packets should be reduced. The method proposed in this paper increases the network lifetime by 40% at most compared with the legacy AODV and MMBCR.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.18-23
• /
• 2008

This paper describes development of real-time condition monitoring system to observe state of a container crane in a port. To analyze the state of a crane, the strength and the direction of wind are measured with sensors along with the load resulted a crane at the moment. The measured signals are processed by especially developed conditioning board and converted into digital data. Measured data are analyzed to define the state of the crane at an indicator. For transmission of these data to the indicator, we implemented wireless sensor network based on IEEE 802.15.4 MAC(Media Access Control) protocol and Bluetooth network protocol. To extend the networking distance between the indicator and sensor nodes, the shortest path routing algorithm was applied for WSN(Wireless Sensor Network) networks. The indicator sends the state information of the crane to monitoring server through IEEE 802.11 b wireless LAN(Local Area Network). Monitoring server decides whether alarm should be issued or not. The performance of developed WSN and Bluetooth network were evaluated and analyzed in terms of communication delay and throughput.