• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1321-1326
• /
• 2008

According to the conventional train control system, the area of each train is detected by plural track circuits located in a constant distance on railway lines in order to control a distance between trains. The conventional train control system has the difficulty in making use of the substructure thoroughly and transmitting enormous amount of information. To solve those problems, the wireless CBTC system has been a global issue. To apply wireless CBTC system to train system, the following two requirements are preferentially necessary: (1) Dualizing wireless CBTC system to control trains ceaselessly in a system accident, (2) Improving dependency of transmitted information for location and velocity to protect collision and derailment of lightweight trains in advance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1398-1405
• /
• 2015

Domestic railway communication in Korea has been introduced for mutual communications among control center, operation staffs, and maintenance staffs. It has been mainly used as railway disaster and safety functions from VHF and UHF from 1980’s and TRS-Astro and TRS-Tetra from the 2000’s. Recently for urban railways communications, 18GHz and 2.4GHz ranges have been utilized for image transmissions and control command communications, respectively. This paper analyzes technical development of LTE-R, LTE communication for Railways, that has been designed as a single integrated railway wireless network in order to merge the current various communication systems. In this paper, we present the details of the examination of the LTE-R test-bed using 2.6GHz test frequency in Daebul test line through CW test and optimization test.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.130-131
• /
• 2007

Wireless Sensor Network typically incorporates diverse applications within the same network. A sensor node may have multiple sensors i.e. light, temperature, seismic etc with different transmission characteristics. Each application has different characteristics and requirements in terms of transmission rates, bandwidth, packet loss and delay demands may be initiated towards the sink. In this paper we propose Heterogeneous Traffic Oriented Rate Control Protocol (HTRCP) which ensures efficient rate control for diverse applications according to the priority specified by the sink. Moreover. HTRCP ensures the node priority based hop by hop dynamic rate adjustment for high link utilization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.733-736
• /
• 2009

Power Line Communication(PLC) is need not additional communication line. So establishment expense is inexpensive and application is simple. Therefore, lower part network of various application field is possible. However, there are high subordinate interference and noise problem on limited transmission data and communication interference element. Wireless Sensor Network(WSN) is need not infrastructure, Self-regulating network architecture of sensor nodes is possible. So at short time, network construction is available. But, power consumption is increased by active sensing for QoS elevation and unnecessary information transmission, low electric power design and necessity of improve protocol are refered to life shortening problem and is studied. In this paper, supplement problem of power line communication and wireless sensor network mutually and because advantage becomes linkage integration control system using synergy effect of two technologies as more restriction be and tries to approach structurally control network that is improved for smooth network environment construction. Honeywell's hybrid sensor network does comparative analysis(benchmarking). Confirm performance elevation proposing teaming of power line communication and wireless sensor network. Through simulation, service delay decreases and confirms that performance elevation.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.17-22
• /
• 2015

In recent years, wireless sensor networks have become an important part of data communications. Sensors provide information about the required measurements or control states over wireless networks. The energy efficient routing protocol of wireless sensor networks is the key issue for network lifetimes. The routing protocol must ensure that connectivity in a network is remained for a long period of time and the energy status of the sensor in the entire network must be in the same level in order not to leave the network with a wide difference in the energy consumptions of the sensors. In this paper we propose a new routing protocol based on AODV protocol that considers the energy efficiency when the protocol determines the routing paths, which is called AODV-EE. The proposed method prevents an imbalance of power consumption in sensors of wireless networks. From the simulation results it is shown that the proposed algorithm can be effectively used in collecting and monitoring data without concerning about the disconnection of the networks.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.3
• /
• pp.61-71
• /
• 2003

This paper suggests a wireless diagnostic technique using SMS (Short Message Service) of mobile telecommunication network for pole transformer. The temperature and current of pole transformer are acquired and the average and standard deviation are transmitted using SMS of mobile telecommunication network when transformer is overloaded The algorithm and protocol is design to fit the wireless diagnostic technique. By using the wireless method, the weak point of accessability can overcome. It is possible to manage, control, and monitor many transformers with just one server.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.247-254
• /
• 2014

For wireless multimedia sensor network (WMSN), it is crucial to select appropriate channels to deliver multimedia data stream generated by image and voice sensors periodically or continuously. Although most of previous researches assume that fixed channels are used for wireless sensor networks, they causes limit to support various application areas. In this paper, we apply link-setup algorithms developed for wireless cognitive radio networks for searching common channels between two nodes without common control channels. We also show the algorithm causes serious performance degradation as the total number of used channels increases, and then propose a new link-setup algorithm to resolve the problem. Therefore, the proposed algorithm shows 30 % higher performance compared to existing algorithms.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.9
• /
• pp.816-821
• /
• 2005

The remote operation of $4\~5$ cranes for container loading/unloading at a port by one operator will dramatically improve loading/unloading efficiency through productivity increase, cost reduction, and so on. This study develops a remote crane control system for container loading/unloading yard cranes. First, a wireless video and audio system to transmit views and sounds of the working field is designed by using 3 web cameras and a microphone. Next, a RSVP-based multi-path reservation method is presented with a view to improving the quality of service in the communication network for remote control. Simulation results show that a RSVP-based multi-path reservation can enhance the reservation success rate in the TCP/IP network.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.35-44
• /
• 2008

In this study, to establish a web-based bridge monitoring system with wireless sensor network environment, we constructed microminiaturized sensor based wireless communication techniques and micro processing, databases for data combination and administration, variable control programs and processors for transferring data by internet. Then those data are measured and analyzed by the constructed bridge monitoring system with wireless sensors. To evaluate the practicability of the bridge monitoring system with wireless sensor, we compared the values measured in the tests with wire sensor under same conditions. The results show that the trend of the data obtained from the monitoring systems with wire sensors and wireless sensors was very similar but the some lost data in the communication process with wireless sensor network environment. And through laboratory and field tests, the effectiveness and the applicability of the proposed methods were verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.229-236
• /
• 2017

The railway has recently been expanded with the phase of the future transportation. Accordingly, using the new technologies such as smart devices and LTE-R, the needs for reducing operational costs and improving passenger services have emerged. To realize these needs, the government is pushing to build the dedicated wireless network for the railway systems. In this paper, the shunting route indicator was selected for this study because it has the best effect for the wireless system removed lots of wired cables. And the wireless shunting route indicator applied with LTE-R technology was developed to replace the current wired control system. The functional goal(the wireless control function applied LTE-R), the performance goal(less than 300ms for transferring the control information), and the reliability goal(over the 100,000 hours for MTBF) were set, and these goals were achieved and demonstrated through the test and validation.