• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.259-266
• /
• 2017

The massive traffic interferences in the wireless home IoT provides the reason for packet losses, and it degrades the QoS (Quality of Service) and throughput on the home network. This paper propose a new adaptive traffic interference control system, ATICS, for enhancing QoS and throughput for IoT services as detecting a traffic process and non-traffic process in the wireless home network. The proposed system control the traffic interferences as distinguishing the short-term traffic process and long-term traffic process by traffic characteristics in wireless home networks. The simulation results shows that the proposed scheme have more efficient traffic control performance than the other schemes.

• Smart Media Journal
• /
• v.4 no.1
• /
• pp.25-32
• /
• 2015

Powering wireless sensors with energy harvested from the environment is coming of age due to the increasing power densities of both storage and harvesting devices and the electronics performing energy efficient energy conversion. In order to maximize the functionality of the wireless sensor network, minimize missing packets, minimize latency and prevent the waste of energy, problems like congestion and inefficient energy usage must be addressed. Many sleep-awake protocols and efficient message priority techniques have been developed to properly manage the energy of the nodes and to minimize congestion. For a WSN that is operating in a strictly energy constrained environment, an energy-efficient transmission strategy is necessary. In this paper, we present a novel transmission priority decision scheme for a heterogeneous body sensor network composed of normal nodes and an energy harvesting node that acts as a cluster head. The energy harvesting node's decision whether or not to clear a normal node for sending is based on a set of metrics which includes the energy harvesting node's remaining energy, the total harvested energy, the type of message in a normal node's queue and finally, the implementation context of the wireless sensor network.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.1059-1066
• /
• 2011

This paper makes a close inquiry into ill-conditioning that may be occurred in wireless localization of the sensor nodes based on network signals in the wireless sensor network and provides the clue for solving the problem. In order to estimate the location of a node based on the range information calculated using the signal propagation time, LS (Least Squares) method is usually used. The LS method estimates the solution that makes the squared estimation error minimal. When a nonlinear function is used for the wireless localization, ILS (Iterative Least Squares) method is used. The ILS method process the LS method iteratively after linearizing the nonlinear function at the initial nominal point. This method, however, has a problem that the final solution may converge into a LM (Local Minimum) instead of a GM (Global Minimum) according to the deployment of the fixed nodes and the initial nominal point. The conditions that cause the problem are explained and an adaptive method is presented to solve it, in this paper. It can be expected that the stable location solution can be provided in implementation of the wireless localization methods based on the results of this paper.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.131-135
• /
• 2011

In this paper, we describe the design and implementation of wireless smart plug having AC power sensor and intelligent standby power control algorithm for energy sensor network. The adaptive standby power control algorithm has function to apply different threshold of standby power by using learning algorithm depending on electric equipments. As using the proposed algorithm, user convenience will be more better and power consumption can be more reduced. The implemented prototypes of wireless smart plug and wireless access point were tested to verify the required functions and performance. As a result, we confirmed practicality of wireless smart power sensor and satisfaction of given design specifications.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.452-456
• /
• 2010

In wireless sensor networks, due to the many-to-one convergence of upstream traffic, congestion more probably appears. Network congestion can be alleviated by controlling incoming traffic, but using traffic control can violate fidelity level required by applications. In this paper, we propose multipath-based congestion control scheme alleviating congestion by resource control for wireless sensor networks. When congestion occurs, the multipath-based congestion control scheme distributes network traffic through multiple alternate paths, and consequently, the scheme enables to detour in the congested spot and increase resource utilization. Our results show that our multipath-based congestion control scheme can satisfy fidelity level required by applications and alleviate congestion effectively.

• Journal of Korea Multimedia Society
• /
• v.12 no.6
• /
• pp.824-832
• /
• 2009

Multi-radio multi-channel Wireless Mesh Network requires an effective management policy to control the assignment of channels to each radio. We concentrated our investigation on modeling method and solution to find a dynamic channel assignment scheme that is adapted to change of network traffic. Multi-path routing scheme was chosen to overwhelm the unreliability of wireless link. For a particular traffic state, our optimization model found a specific traffic distribution over multi-path and a channel assignment scheme that maximizes the overall network throughput. We developed a simple heuristic method for channel assignment by gradually removing clique load to obtain higher throughput. We also presented numerical examples and discussion of our models in comparison with existing research.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.381-387
• /
• 2011

Measurement controller that acquire and control and observe data from scattering sensors is organic with central control room. Therefore, measurement controller is efficient wireless network than wire network. But, serious problem is happened in security from outside if use wireless network. Therefore, this paper proposed suitable MS-WP cryptographic system to measurement control wireless network to augment network efficiency of measure controller. Result that implement proposed MS-WP cryptographic system by chip level and achieve a simulation, confirmed that 130% processing rate increase and system efficiency are increased double than AES algorithm. Proposed MS-WP cryptographic system augments security and is considered is suitable to measurement controller because that low power is possible and the processing speed is fast.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.18-24
• /
• 2013

Network coding has been extensively studied to increase the network throughput by exploiting the broadcast and overhearing capabilities. In this paper, we formulate a network utility maximization problem to improve the network utility in multichannel, multiradio and multisession wireless multihop network with intrasession network coding. To find the solution of this problem, we propose a congestion control, distributed rate control, and heuristic resource allocation algorithm. We find the network utility and evaluate the performance in multichannel, multiradio and multisession environment by using MATLAB. Finally, the results show that the proposed schemes can achieve throughput improvement by performing the network utility optimization in wireless multihop network.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1783-1784
• /
• 2007

A new method to control a remote robot with PDA and wireless network is presented. A robot system and PDA are used to show the effectiveness of the control system in home network environments.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.321-326
• /
• 2015

Smart metering is one of the most implementable internet-of-thing service. In order to implement the smart metering, a wireless communication network should be newly designed and evaluated so as to satisfy quality-of-service of smart metering. In this paper, we consider a wireless network for the smart metering implemented with multi-purpose wireless chips and channel coding-functioned micro controllers. Especially, channel coding is newly adopted to improve successful frame transmission probability. Based on the successful frame transmission probability, average transmission delay and delay violation probability are analyzed. Using the analytical results, service coverage expansion is evaluated. Through the delay analysis, service feasibility can be verified. According to our results, channel coding needs not to be utilized to improve the delay performance if the smart metering service coverage is several tens of meters. However, if more coverage is required, chanel coding adoption definitely reduces the delay time and improve the service feasibility.