• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.91-96
• /
• 2017

IoT which is an abbreviation of Internet of Things refers to the communication network service among various objects such as people-people, objects-objects interconnection. The characteristic of IoT that enables direct connection among each device makes security to be considered as more emphasized factor. Though a security module such as an authentication protocol for resolving various security problems that may occur in the IoT environment has been developed, some weak points in security are still being revealed. Therefore, this paper proposes a method for including a protocol including gateway authentication procedure and mutual authentication between the devices and gateways. Protocols with additional authentication procedures can appropriately respond to attackers' spoofing attacks. In addition, important information in the message used for authentication process is protected by encryption or hash function so that it can respond to wiretapping attacks.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.13-24
• /
• 2013

IEEE 802.15.4 network and WiFi network are installed to overlap each other and configured to use adjacent frequency bands in which case the communication service required by applications can not be guaranteed because of randomly increased frame transmission delay and frequent frame transmission failures at nodes in IEEE 802.15.4 network. In this paper, transmission delay model at IEEE 802.15.4 nodes and an experimental system to evaluate the interference from WiFi traffic are described, then elements for the evaluation of interference are measured with the analysis of their characteristics. A sequential method of using medium access layer and physical layer elements of IEEE 802.15.4 protocols is proposed to decide interference from WiFi network. With the proposed method, if an evaluation function having frame transmission failures and transmission delay as variables returns a value greater than a threshold, intensive measurements of wireless channel power are carried out subsequently and the final decision of interference is made by the calculated average channel power. Experimental results of the method show that the decision time is reduced with increased frequency of decision in comparison to an other similar method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.203-210
• /
• 2011

The current sensor network analyzes the data collected by the sensing of fixed sensor nodes and provides a service. However, this method cannot actively handle the state and the change in the position of people, 'the target for sensing and the change in the environment', including home automation, building automation and real-time road & weather information, and healthcare environment, etc. To support a dynamic situation which is appropriate for an individual in this diverse environment, it is necessary to provide actively differentiated specific information according to the movement of people and the changes in the environment. In this study, a individualized sensor mobile agent middleware which provides the individualized information (the location of fire incidence and the trace for the path of spread), has been realized through the sensor network environment constructed by the installation of wireless sensor nodes mounted with mobile agent middlewares in buildings.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.151-155
• /
• 2017

With the rapid growth of the up-to-date wireless network and Internet technologies, huge and various types of things around us are connected to the Internet and build the hyper-connected society, and lots of smart applications using these technologies are actively developed recently. IoT connects human, things, space, and data with various types of networks to construct the hyper-connected network that can create, collect, share and appling realtime information. Furthermore, most of the smart applications are concentrated on the service that can collect and store realtime contexts using various sensors and cloud technology, and provide intelligence by making inferences and decisions from them nowadays. In this paper, we design a smart application that can accurately control and process the current state of the specific context in realtime by using the state-of-the-art ICT techniques such as various sensors and cloud technologies on the IoT based mobile computing environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.117-124
• /
• 2009

In this paper, we have developed communication modules for ubiquitous transportation sensor network (u-TSN). The developed module can be used for intelligent transportation services. The developed systems are based on IEEE 802.11a and IEEE 802.11g technologies for vehicle and infrastructure systems, respectively. We have found that the throughput for the developed systems is at maximum around 15 Mbps. It is reduced to 10 Mbps at a long distance and high speed condition. The performance is enough to support traffic control services in dense traffic condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1416-1426
• /
• 2008

In this paper, we present a small size and multiband directional dipole antenna for mobile communication repeaters. In the omni-directional dipole antenna, a planar reflector under the dipole provides improved directivity in front-direction with wide beamwidth. In order to miniaturize the directive dipole, the size of the reflector is reduced. A vertical stub on the reflector is proposed to enhance the front-directivity of the radiation pattern and mitigate the backward radiation due to the reduced reflector. Furthermore, we use horizontal stubs on edge of vertical stub to obtain additional reduction of the antenna size. To meet the current demand of wireless communication service, the designed antenna shows wideband characteristic by employing electromagnetic coupled two-dipoles with dual-resonance frequencies.

• Journal of Internet Computing and Services
• /
• v.7 no.5
• /
• pp.43-57
• /
• 2006

Next-generation mobile communication systems evolve in the form of high speed data transmission along with integration of wired-wireless network. Therefore, it needs researches on integrating service to heterogeneous networks to offer high speed data transmission and various services while supporting user mobility. In existing studies, heterogeneous networks are linked to single core network separatively, Since vertical handoff between heterogeneous networks leads to some delay, packets may be lost during vertical handoff. To solve this problem, this paper proposes an hierarchically integrated network architecture considering the characteristics of CDMA2000, WiBro, and WLAN. The hierarchically integrated networks are overlaid according to coverage of each network. Therefore, the proposed architecture can minimize handoff delay and packet loss. In addition, this paper proposes an integrated framework for next generation mobile communication networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2411-2417
• /
• 2012

Globally, the emergence of smart phones vitalized the ecosystem of mobile data service industry. Consequentially, mobile data traffic has been explosively growing and the speed of growth will be more steep. New spectrum will be required in order to properly accommodate the explosively growing mobile data traffic. However, it will be difficult to acquire a sufficient guard band between different frequency bands because the range of frequency which is suitable for wireless communications is limited. Thus, the performance degradation caused by inter-band interference will be one of challenging problems in the next generation mobile communication systems. In this paper, we analyze the performance degradation caused by inter-band interference by computer simulations in various environments. Our results show that the impact of the inter-band interference is more critical when own signal is poor or its own interference from neighboring cells is low.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1481-1500
• /
• 2016

Device-to-Device (D2D) communication underlaying macro-small cell networks, as one of the promising technologies in the era of 5G, is able to improve spectral efficiency and increase system capacity. In this paper, we model the cross- and co-tier D2D communications in two-tier macro-small cell networks. To avoid the complicated interference for cross-tier D2D, we propose a mode selection scheme with a dedicated resource sharing strategy. For co-tier D2D, we formulate a joint optimization problem of power control and resource reuse with the aim of maximizing the overall outage capacity. To solve this non-convex optimization problem, we devise a heuristic algorithm to obtain a suboptimal solution and reduce the computational complexity. System-level simulations demonstrate the effectiveness of the proposed method, which can provide enhanced system performance and guarantee the quality-of-service (QoS) of all devices in two-tier macro-small cell networks. In addition, our study reveals the high potential of introducing cross- and co-tier D2D in small cell networks: i) cross-tier D2D obtains better performance at low and medium small cell densities than co-tier D2D, and ii) co-tier D2D achieves a steady performance improvement with the increase of small cell density.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.107-112
• /
• 2018

Recently, there are many real life applications that uses drones. There are various applications such as the aerial shot with the drones for the broadcasting service or drone racing competition and so on. Specifically, they patrol for the traffic enforcement on a highway. The police department use the 'Spot Mobility' method which float the drones for 30 minute period. However, this method is inefficient for the wide area with small numbers of enforcement. Therefore, a wireless network system consists of drones to patrol on the highway systematically is required. In this paper, the most efficient routing protocol will be selected for the MANET drone network by applying various routing protocols. To accomplish this, the drone patrol network system with routing protocols are designed and simulated in OPNET simulator.