• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1112-1115
• /
• 2019

This paper proposes a novel low-profile omni-directional microstrip antenna to mount on the deployable wing of the observation munition. The proposed antenna is designed on seven hexagonal resonators in a quasi-circular array to achieve a monopolar radiation pattern with a thin substrate. By employing the mesh ground structures, the resonant frequencies and impedance bandwidths of the proposed antenna is investigated. To verify the feasibility of the mesh ground structure, the thin ground wire width is investigated theoretically for improving the 3-dB fractional bandwidth, realized antenna gain and quality-factor. The proposed antenna demonstrates a good monopolar radiation in good agreement with the simulation results. The implemented prototype shows the measured bandwidth of 326 MHz with respect to 5.65% centered at 5.77 GHz and realized gain of 5.49 dBi at 5.84 GHz.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2022

Telemetry system is a system that measures and transmits status information in the aircraft to the ground. The data received from the ground is information for monitoring the state of the aircraft, and can be checked and analyzed in real time through the test program. Data processing test system for telemetry currently in operation is built to transmit data using wired communication and perform test. As smart devices become popular due to the continuous development of information and communication technology, wireless communication networks are becoming important, and technologies for improving performance are steadily being developed. In this paper, we suggests and builds data processing ground test system for telemetry using wireless communication(Wi-Fi) that can be checked through smart devices such as tablets, in order to break away from the existing method and apply future-oriented technology. Finally, the suggested test system performance was proved by testing in various environments by linking test equipment and test program.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.128-133
• /
• 2023

Satellite based communication is networks in which users in a wide area can access without wired-based ground infrastructure. In particular, the need is emerging due to the recent Ukraine-Russia war. Satellite network systems acquire data that is difficult to observe on Earth as well as communication networks and are also used for research and development, which allows additional data to be produced. However, due to the nature of communication networks existing in outer space, certain vulnerabilities are revealed, and attacks based on them can be exposed. In this paper, we analyze vulnerabilities that may arise due to the nature of satellite communication networks and describes current research, countermeasures, and future research directions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.457-460
• /
• 2018

The mobile communication based train control is the train control system by utilizing wireless communication rather than conventional wired communication. Traditional train control operates train occupation, safety integrity and moving authority using fixed block wired railway signal system. Since introduction of mobile communication in railway area, railway operators can provide improved passager services. Futhermore, it can replace inefficient train onboard equipments and railway ground facilities for economic benefits. In this paper we introduce mobile communication based railway system currently in operation around the world. Moreover, we provide the minimum requirements of the radio communication performance. Proposed minimum requirements of the radio communication improve more secure and efficient mobile communication based train control system.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.4
• /
• pp.19-27
• /
• 2009

Integrated Urban Spatial Information Management Platform (USIMP) is defined as an operational environment where technologies for intelligent management of urban facilities are made possible through the integration of diverse technologies such as sensors for ground and underground facilities, middleware technology, wired and wireless network, GIS-USN linkage. To make the integration of these diverse technology possible, it is imperative to have a sound reference model for the platform. This paper provides a standardized reference model for USIMP based on the RM-OPD(Reference Model for Open Distributed Processing) standard.

• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.759-777
• /
• 2008

A wireless sensing system is designed for application to structural monitoring and damage detection applications. Embedded in the wireless monitoring module is a two-tier prediction model, the auto-regressive (AR) and the autoregressive model with exogenous inputs (ARX), used to obtain damage sensitive features of a structure. To validate the performance of the proposed wireless monitoring and damage detection system, two near full scale single-story RC-frames, with and without brick wall system, are instrumented with the wireless monitoring system for real time damage detection during shaking table tests. White noise and seismic ground motion records are applied to the base of the structure using a shaking table. Pattern classification methods are then adopted to classify the structure as damaged or undamaged using time series coefficients as entities of a damage-sensitive feature vector. The demonstration of the damage detection methodology is shown to be capable of identifying damage using a wireless structural monitoring system. The accuracy and sensitivity of the MEMS-based wireless sensors employed are also verified through comparison to data recorded using a traditional wired monitoring system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.57-62
• /
• 2019

In this paper, oneM2M based data monitoring and acquisition system is designed and implemented to measure and transmit the voltage, current, temperature, acceleration and vibration of the motor. The proposed system can detect electrical faults (overcurrent, reverse phase, phase loss, ground fault) and mechanical faults (MC counter, motor operation time, bearing and winding temperature, motor speed, insulation resistance). The system consists of sensor data collection, web server, php, database, wired/wireless communication system. The insulation resistance and the motor speed were measured, and the experimental results were similar for both the test resistance value and the reference input value.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.493-496
• /
• 2005

The PMU (Payload Management Unit) in MSC (Multi-Spectral Camera) is the main subsystem for the management, control and power supply of the MSC payload operation. The PMU shall handle the communication with the BUS (Spacecraft) OBC (On Board Computer) for the command, the telemetry and the communications with the various MSC units. The PMU will perform that distributes power to the various MSC units, collects the telemetry reports from MSC units, performs thermal control of the EOS (Electro-Optical Subsystem), performs the NUC (Non-Uniformity Correction) function of the raw imagery data, and rearranges the pixel data and output it to the DCSU (Data Compression and Storage Unit). The BUS provides high voltage to the MSC. The PMU is connected to primary and redundant BUS power and distributes the high unregulated primary voltages for all MSC sub-units. The PSM (Power Supply Module) is an assembly in the PMU implements the interface between several channels on the input. The bus switches are used to prevent a single point system failure. Such a failure could need the PSS (Power Supply System) requirement to combine the two PSM boards' bus outputs in a wired-OR configuration. In such a configuration if one of the boards' output gets shorted to ground then the entire bus could fail thereby causing the entire MSC to fail. To prevent such a short from pulling down the system, the switch could be opened and disconnect the short from the bus. This switch operation is controlled by the BUS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.250-253
• /
• 2014

Due to limited resource, marine communication is severely limited when compared to communications in land. Radio relay facilities, etc. based on a wired network through a long distance communication is possible. In addition, the aircraft is in the air, the ground-based network service based on long-range straight-line distance and elevation (LOS: Line of Sight) communications. On the other hand, the distance in a straight line to the sea, the sea level because communication is limited or through satellite, underwater communications relay equipment installed in the communication scheme has been investigated.. In this paper, using TCP-based real-time joint maritime security communication links were studied. Harsh marine environment, real-time communication that can provide secure communications and propose a LINK joint. In this study, more secure, and convenient communications at sea, a plan was presented to you.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.3
• /
• pp.71-78
• /
• 2022

In this study, the applicability of underground displacement sensors was considered through rock blasting tests to develop a relatively inexpensive and efficient slope failure prediction system that can quickly detect the risk of slope failure in advance and issue predictions and warnings with accurate judgment. In the blasting experiment, the sensor located close to the blasting source showed a large displacement due to crushing inside the rock and the sensor located away from the blasting source showed a relatively small strain. This study confirmed that the wired and wireless type underground displacement sensor system can be applied to measure the behavior of the rock slope, and it can be used as a basic data for establishing an early warning system to predict slope failure.