• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.545-555
• /
• 2000

Surface defects in injection molded parts due to the unsteady flow are related to the dimension of gate, operational conditions and rheological properties of polymer. In this study we have examined surface defects in injection molding for PC, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes that are tensile, flexural and impact test specimens with various gate and cavity thicknesses. Through this study we have observed that the formation of surface defect associated with jetting during filling stage in injection molding is strongly related to not on]v die swell but retardation of die swell. Large die swell eliminates jetting however the large retardation of die swell stimulates jetting. Reducing the thickness ratio of cavity to gate can reduce or eliminate jetting and surface defects. It also enlarges process window that can produce steady flow of polymer melt in injection molding.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.10-15
• /
• 1999

We have studied a method to design and fabricate the Intermediate Frequency(IF) band pass filter with low shape factor which is used for CDMA base station on the 35°Y-cut X-propagation Quartz substrate. In order to fabricate a device of the low shape factor for the IF SAW filter on this substrate, we employed apodization weighted type interdigital transducer(IDT) as an input and withdrawal weighted type IDT as an output by using impulse modelling method. Also, using the Kaiser-Bessel window function, we have adopted 2200pairs and 1000pairs of input and oueut IDT respectively to minimize the effect of ripple. Furthermore, the width and the space of IDT finger are 3.6 ㎛ and 3.5 ㎛ respectively. Thus, we can have optimal results when the IDT thickness is 6000Å in consideration of the ratio of SAW's wavelength while it's aperture is 2mm for impedance matching. The fabricated SAW filter for CDMA had the property of almost 115.2MHz of a center frequency, less then 1.27MHz of bandwidth, less than 1.3 of shape factor, - l5dB of out band attenuation insertion loss and -45dB of rejection band.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.13-17
• /
• 1997

This paper investigates the influence of material properties of the acoustic damping layer in the low noise hydrophone designed in the previous paper. For increase of the insensitivity of the hydrophone to external noises, acoustic impedance and damping coefficients are selected and the effects of the selected material property on the hydrophone response to the external noises are simulated with finite element method (FEM). The results show that the damping coefficients are not influential to the structural vibration decoupling from the sensing element. On the other hand, the optimum acoustic impedance of compliant layer is estimated which is smaller than 1 Mrayl or larger than 4 Mrayl. However polymer materials, which are in general use for acoustic window and damping layers, is not appropriate for the compliant materials of this hydrophone. Therefore development of new composite materials, i.e. ceramic-polymer composite or metal-ceramic composites etc., is required for the development of effective self noise suppressing underwater hydrophones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1124-1131
• /
• 2008

In this paper, we propose a timing synchronization scheme and its hardware architecture of the next generation IEEE 802.11n wireless LAN standard which is based on MIMO-OFDM technique. Proposed timing synchronization method takes two steps which consist of two modified auto-correlators. For coarse timing synchronization, a sliding window differentiator is used after a conventional auto-correlation in order to avoid plateau problem. The conjugate symmetry property of L-LTS is utilized for the simplification of fine timing synchronization. Since cross-correlation based methods are not required, the computational complexity and the number of multipliers can be reduced. In order to reduce the hardware complexity, we have used sign multipliers. Based on simulation results, the proposed method outperforms a conventional method. The proposed scheme can be applied to IEEE 802.11n systems and can easily be expanded to frequency synchronization scheme.

• The KIPS Transactions:PartD
• /
• v.19D no.2
• /
• pp.139-146
• /
• 2012

Data Mining is widely used to discover knowledge in many fields. Although there are many methods to discover association rule, most of them are based on frequency-based approaches. Therefore it is not appropriate for stream environment. Because the stream environment has a property that event data are generated continuously. it is expensive to store all data. In this paper, we propose a new method to discover association rules based on stream environment. Our new method is using a variable window for extracting data items. Variable windows have variable size according to the gap of same target event. Our method extracts data using COBJ(Count object) calculation method. FPMDSTN(Frequent pattern Mining over Data Stream using Terminal Node) discovers association rules from the extracted data items. Through experiment, our method is more efficient to apply stream environment than conventional methods.

• Journal of Fashion Business
• /
• v.17 no.6
• /
• pp.44-59
• /
• 2013

The modern people do express their personalities by appearance and actively use the appearance as the social tools, and the attractive appearance largely does influence the human relationship. As the appearance's importance is being magnified, the attractive appearance and favourable impression is an important standard for job performance and social position, and used as the way to reach the social goal. This study does investigate the design's kind and character of the beard which belongs to the male exclusive property and compare the differences of the impression's formation according to the beard design. The empirical results confirmed that the male beard design formated the various impressions according to the designs and their mutual relationship existed. Therefore, the beard is a symbol of maleness and an expression for the social position and personal character, whereas it possesses the very important meaning as the influencing factor on the impression's change. First, the pre stimuli were finished through the pre survey for composition of questionnaire in order to evaluate the impression after selection of experimental models and beard types for measuring instruments. Second, sixty three university students were surveyed by pre stimuli and questionnaire as pre experiment, and afterwards the measuring instruments and experimental design were revised. Third, the stimuli completed (nine beard designs) were intentionally well distributed as questionnaire by sex and ages in Seoul metropolitan and her environment. and the factorial analysis and the coefficient of Cronbach's ${\alpha}$ for reliability test were completed for questionnaire's validity using SPSS/PC+ Window Ver. 12.0.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.316-322
• /
• 2001

Cathode materials $LiMn_{2-y}$$M_{y}$ $O_4$(M=Zn and Mg) were obtained by reacting the mixture of LiOH.$H_2O$, Mn $O_2$ and MgO ar ZnO at 80$0^{\circ}C$ for 36h in an air atmosphere. These materials showed an extended cycle life in lithium-anode cells working at room temperatue in a 3.0 to 4.3V potential window. Among these materials, LiM $n_{1.9}$M $g_{0.1}$ $O_4$ showed the best cycle performance in terms of the capacity and cycle life. The discharge capacities of the cathode for the Li/LiM $n_{1.9}$ $M_{0.1}$ $O_4$ cell at the 1st cycle and at the 70th cycle were about 120 and 105mAh/g, respectively. This cell capacity is retained by 88% after 70th cycle. In cyclic voltammetry measurement, all cells revealed tow oxidation peaks and reduction peaks. However, Li/$LiMn_{2-y}$$M_{y}$ $O_4$ cell substituted with Zn and Mg showed new reaction peak during reduction reaction.eaction.ion.ion.

• Korean Journal of Materials Research
• /
• v.28 no.5
• /
• pp.301-307
• /
• 2018

A boron-doped diamond(BDD) electrode is attractive for many electrochemical applications due to its distinctive properties: an extremely wide potential window in aqueous and non-aqueous electrolytes, a very low and stable background current and a high resistance to surface fouling. An Ar gas mixture of $H_2$, $CH_4$ and trimethylboron (TMB, 0.1 % $C_3H_9B$ in $H_2$) is used in a hot filament chemical vapor deposition(HFCVD) reactor. The effect of argon addition on quality, structure and electrochemical property is investigated by scanning electron microscope(SEM), X-ray diffraction(XRD) and cyclic voltammetry(CV). In this study, BDD electrodes are manufactured using different $Ar/CH_4$ ratios ($Ar/CH_4$ = 0, 1, 2 and 4). The results of this study show that the diamond grain size decreases with increasing $Ar/CH_4$ ratios. On the other hand, the samples with an $Ar/CH_4$ ratio above 5 fail to produce a BDD electrode. In addition, the BDD electrodes manufactured by introducing different $Ar/CH_4$ ratios result in the most inclined to (111) preferential growth when the $Ar/CH_4$ ratio is 2. It is also noted that the electrochemical properties of the BDD electrode improve with the process of adding argon.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.4
• /
• pp.312-333
• /
• 2005

SIP(Session Initiation Protocol) has been proposed for session control protocol of Internet multimedia communication system like VoIP(Voice over IP). SIP has complicated session control steps to support various kinds of audio and video formats and to assure service quality of real time data communication. Up until now, existing protocol analyzers can not provide such detailed information of SIP based communication system. In this paper, therefore, we propose a new protocol analyzer as a tool that can analyze and diagnose SIP based multimedia communication system throughout the session initiation, data exchange and session change steps. The propose traffic analyzer, which is called STAT(SIP based Traffic Analysis Tool), Is implemented on Winder's environment so that it is generally usable and extensible. Since STAT analyze low level packets captured via Ethernet broadcasting property, it is able to provide session status and real time traffic monitoring information without any affection to the communication system. The STAT which is implemented in this paper. therefore, is expected to be a useful tool for developing and managing of a SIP based multimedia communication system.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.574-579
• /
• 2011

3-Roll coating process as a key application technology for manufacturing automotive pre-painted metal-sheets has been studied. The 3-Roll coating system for this study consists of pick-up roll for picking up and distributing coating liquid from the reservoir, metering roll to properly meter coating liquid in metering gap regime, and applicator roll for directly transferring liquid into metal-sheet surface. Flow dynamics and operable coating windows of a polymeric paint (primer) with shear-thinning rheological property have been correlated with processing parameters such as speed ratio and metering gap between pick-up and metering rolls. In the uniform coating regime, dry coating thickness increased with increasing metering gap or decreasing speed ratio. Ribbing and cascade instabilities were observed in low speed and high speed ratio conditions, respectively. It is revealed that lower speed ratio makes severity and wavelength of the ribbing increase, aggravating flow instability in coating systems.