• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.6
• /
• pp.15-25
• /
• 2019

Contamination of soil by deicing salt is among the important environment problems due to their toxicity and negative impact to human health and the environment. One of the effective methods for cleaning the soil from deicing salts is desalination using soil amendment-phytoremediation continuum treatment. The purpose of this study was to determine how much of the pH, EC control and Ca²⁺, Na⁺, Mg²⁺, and K⁺ taken up soil amendments and Miscanthus sinensis, and to evaluate the effect of salt reduction and growth improvement as affected by soil amendment in high concentration of calcium chloride (CaCl₂) deicing salts. Results indicated that the addition of soil amendments was decrease the EC and pH, also significantly reduce the leaching of Ca²⁺, Na⁺, Mg²⁺, K⁺, a chloride ions related deicing salts, compared to the control for CaCl₂ 10 g/L treatment. It also resulted in an enhanced plant growth and higher plant height, leaf length, leaf width, number of leaves, fresh weight and dry weight in Hydroball treatment + Miscanthus sinensis planting continuum treatment compared to the treatment that planted Miscanthus sinensis only. Therefore, we concluded that soil amendments might be attributed to an accumulation of deicing slats in the roadside soil, resulting in the improvement of Miscanthus sinensis growth.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.299-302
• /
• 2014

A freesia (Freesia hybrida Hort.) 'Shiny Bell' was developed for the cut flower in the National Institute of Horticultural Herbal Science in 2012. This hybrid was selected from a crossing between cn. 'Teresa' and 'Rossini', which is white semi-double flowering and red double flowering, respectively. in 2004. Morphological characteristics of the selected hybrid were investigated for 3 years from 2009 to 2011, and then it was named 'Shiny Bell'. 'Shiny Bell' had red color of RHS W155C, and double flower. The growth of the plant was vigorous and the average height was 109.3 cm. The average flower width was 5.8 mm, number of floret per stalk was 11.3, and stalk length was 8.5 cm. The average yield, 7.3 Branches per plant, was 3 stems per plant more than the control cultivar. The average days to first flowering of 'Shiny Bell', was 143.3 days, and it was approximately 7 days later than the control cultivar. The average yield of 'Shiny Bell' was 4.0 cormlets per plant.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.5
• /
• pp.85-93
• /
• 2004

This study was carried out to find out the effect of cool-season turfgrass overseeding onto zoysiagrass(Zoysia japonica L.) for extending green color and solving traffic problem during dormant periods. Overseeding rates of cool-season turfgrasses were $10g/m^2$ of Kentucky bluegrass(KB1), $20g/m^2$of Kentucky b1uegrass(KB2), $60g/m^2$ of perennial ryegrass(PR), $80g/m^2$ of Tall fescue(TF), and $10g/m^2$ of Kentucky bluegrass + $10g/m^2$ of perennial ryegrass mixture(KB+PR) onto 2m${\times}$2m(width${\times}$length) zoysiagrass plots with 3 replications.1 to 9-sca1e of visual quality and visual color were measured after treatment, Consequently cool-season turfgrass overseeding gave a good performances of extending the green periods and enhancing the turf grass quality. KB1 and KB2 were found to be excellent performances for visual quality and visual color compared to PR, TF, KB+PR and control. KB2 showed better turf performances than KB1 within Kentucky bluegrass overseedings. Turfgrass color was kept up for 10 months by overseeding of cool-season turfgrasses(KB1, KB2, PR, TP, KB+PR) compared to about 5~6 months by zoysiagrass(Control). The visual quality and visual color of PR and TF showed good performances during a green-up period of spring, but decreasing tendencies through the summer.Percent diseases data revealed also higher ratings for PR and TF compared to for KB1 and KB2.

• Journal of Bio-Environment Control
• /
• v.7 no.2
• /
• pp.116-122
• /
• 1998

This study was conducted to investigate growth and flowering of hydroponically-grown carnation as affected by substrate and planting date, Three substrates, coir, perlite, and coir＋perlite(1：1. v/v), and two planting dates. May 1 and September 1 were used. Plant height and stem diameter at harvesting time of cut flowers were greater for the September 1 planting than for the May 1 planting. The plants planted on May 1 produced flowers with weak stems and short stem lengths. In addition, flower weight and blossom width were gloater for the September 1 planting than for the Mar 1 planting. The planting date had no significant effect on the number of petals, The carnation planted on May 1 flowered 50 days earlier compared to those Planted on September 1. Plant height and number of petals were the greatest in the plot of coir substrate. The results indicated that for commercial production of cut carnations in a hydroponic system, planting on September 1 is better than May 1. In addition. the results confirm that coir is the superior substrate for the production of cut carnations in a hydroponic system compared to either Perlite or coir＋perlite mixture.

• Journal of Bio-Environment Control
• /
• v.8 no.3
• /
• pp.209-215
• /
• 1999

In order to develop facility for complex farming with aquaculture and vegetable nutrient culture and to investigate growth of tilapia and water quality in the channel type aquaculture system, these experiments were carried out. When tilapia(Tilapia nilotica) was reared in the channel type aquaculture system, Quality of culture water and growth of tilapia were normal. And the growth of tilapia in the channel type and round type aquaculture system was much the same. Channel type aquaculture facilities was applicable to the dual culture system for aquaculture and vegetable culture. Channel type integrated system was composed of aquaculture and sandculture bed, and it was thought that suitable size of the system was about 1.4m(width) $\times$ 1m(height) $\times$ 20m(length).

• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.181-187
• /
• 2008

The structural stability of a simple-typed cultivation facility with a width of 5.6 m for growing Pleurotus ostreatus was analyzed by modeling the facility as three-dimensional steel frames. The computation was done by using the finite element analysis program, ANSYS and the criterion of determining structural stability was based on the allowable stress design (ASD). The computational results showed that the structure with a straight-typed bed column was more stable than those with other types of bed columns against snow depth but there was little difference against wind velocity. As results, the interval of rafter had a more influence on safety wind velocity than that of bed column, while the interval of bed column was more important to safety snow depth. Finally the bed column against buckling was stable in all cases considered in this paper.

• Tunnel and Underground Space
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2010

Crack-controlled blasting method which utilizes notched charge hole has been proposed in order to achieve smooth fracture plane and minimize the excavation damage zone. In this study, the blast models, which have a notched charge hole, were analyzed using dynamic fracture process analysis software to investigate the effect of the geometry of a notched charge hole and decoupling indexes of the charge hole on crack growth control in blasting. As a result, crack extension increased and damage crack decreased with the notch length. Ultimately, stress increment factors and resultant fracture patterns with different notch length and width were analyzed in order to examine the effect factors on the crack growth controlling in rock blasts using a notched charge hole.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.219-228
• /
• 2009

The growing application and the numerous qualities of induction motors (1M) in industrial processes that require high security and reliability levels has led to the development of multiple methods for early fault detection. However, various faults can occur, such as stator short-circuits and rotor failures. Traditionally the diagnosis machine is done through a sinusoidal power supply, in the present paper we study experimentally the effects of the rotor failures, such as broken rotor bars in function of the ac supplying, the load and show the impact of the converter from diagnosis of the machine. The technique diagnosis used is based on the spectral analysis of stator currents or stator voltages respectively according to the types of induction motor ac supplying. So, four different ac supplying are considered: ${\odot}$ the IM is directly by the balanced three-phase network voltage source, ${\odot}$ the IM is fed by a sinusoidal current source given the controlled by hysteresis, ${\odot}$ the IM is fed (in open loop) by a scalar control imposing through ratio V/f=constant, ${\odot}$ the IM is controlled through a vector control using space vector pulse width modulation (SVPWM) technique inverter with an outer speed loop.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.3
• /
• pp.225-232
• /
• 2015

The smart watch is the most popular wearable computing device because it takes a form of wristwatch. Many smart watches have adopted the touch screen interface due to the limited size of display. This paper focuses on touch key size and spacing that affect the usability about the touch key of smart watch. The experiments were made for four touch key sizes (width${\times}$height; $5{\times}5$, $5{\times}7$, $7{\times}5$, $7{\times}7mm$) and nine touch key spacing (vertical${\times}$horizontal; $0{\times}0$, $0{\times}1$, $0{\times}3$, $1{\times}0$, $1{\times}1$, $1{\times}3$, $3{\times}0$, $3{\times}1$, $3{\times}3mm$). The completion time, error rate, control discomfort and identification discomfort were measured. The touch key size $7{\times}7$, $7{\times}5$ and the touch key spacing $3{\times}3$, $1{\times}3$ provided the best results in terms of the completion time and the control discomfort, while the square touch key ($7{\times}7$, $5{\times}5$) provided the best performance for the error rate measure. The result of this study can help ergonomically design the touch interface of the smart watch.

• Journal of Bio-Environment Control
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2008

The experiment was investigated the effects of lower root zone temperature on shoot and root growth of 'Akihime' strawberries in aeroponics in cold season. Root growth was decreased with decrease of root zone temperature, especially in lateral roots. Elongation of main roots was highest in $18^{\circ}C$ of root zone temperature. Number of lateral roots and length of lateral roots were lowest in $8^{\circ}C$ of root zone temperature. Lower root zone temperature resulted significantly in decrease of fresh weight of root and shoot and leaf area of strawberry. But there were no significant statistical differences in shoot fresh weight and leaf area in $8^{\circ}C$ and $13^{\circ}C$ of root zone temperature. Leaf length, leaf width and number of leaves of strawberry were decreased in lower root zone temperature. The results of this experiment will be utilized in the winter season cultivation for strawberry in hydroponics.