• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.346-359
• /
• 1998

The aerodynamic forces and wake structure of the non-rotating downstream circular cylinder, of which the uniform freestream flow is interfered with another spinning upstream cylinder having the same diameter that is located upstream in a line have been investigated experimentally. When the spin rate of the downstream cylinder defined as the ratio of tangential surface velocity of the spinning cylinder to the freestream velocity increases gradually from zero to 1.4, the change of surface pressure distribution, aerodynamic forces of the non-rotating downstream cylinder were measured in case of several distance ratios of 1.5, 3.0, and 4.5 defined as the ratio of distance between the centers of two cylinders to the diameter. The wake flow patterns behind the cylinder were also investigated in each case. From the present experiments, it has been found that the spin rate significantly influences the aerodynamic forces and near-wake flow phenomena of the downstream cylinder in such a way that the drag increases as the spin rate and distance ratio increase and the wake width increases as the distance ratio increases.

• Agribusiness and Information Management
• /
• v.1 no.2
• /
• pp.43-60
• /
• 2009

To improve the performance of wide-issue superscalar processors, it is essential to increase the width of instruction fetch and the issue rate. Removal of control hazard has been put forward as a significant new source of instruction-level parallelism for superscalar processors and the conditional branch prediction is an important technique for improving processor performance. Branch mispredictions, however, waste a large number of cycles, inhibit out-of-order execution, and waste electric power on mis-speculated instructions. Hence, the branch predictor with higher accuracy is necessary for good processor performance. In global-history-based predictors like gshare and GAg, many mispredictions come from commit update of the branch history. Some works on this subject have discussed the need for speculative update of the history and recovery mechanisms for branch mispredictions. In this paper, we present a new mechanism for recovering the branch history after a misprediction. The proposed mechanism adds an age_counter to the original predictor and doubles the size of the branch history register. The age_counter counts the number of outstanding branches and uses it to recover the branch history register. Simulation results on the SimpleScalar 3.0/PISA tool set and the SPECINT95 benchmarks show that gshare and GAg with the proposed recovery mechanism improved the average prediction accuracy by 2.14% and 9.21%, respectively and the average IPC by 8.75% and 18.08%, respectively over the original predictor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.133-142
• /
• 2016

KOMPSAT-3A (KOrea Multi-Purpose SATellite-3A) was launched in March 25 2015 with specification of 0.5 meters resolution panchromatic and four 2.2 meters resolution multi spectral sensors in 12km swath width at nadir. To better understand KOMPSAT-3A positional accuracy, this paper reports a test result on the accuracy of recently released KOMPSAT-3A beta test images. A number of ground points were acquired from 1:1,000 digital topographic maps over the target area for the accuracy validation. First, the original RPCs (Rational Polynomial Coefficients) were validated without any GCPs (Ground Control Points). Then we continued the test by modeling the errors in the image space using shift-only, shift and drift, and the affine model. Ground restitution accuracy was also analyzed even though the across track image pairs do not have optimal convergence angle. The experimental results showed that the shift and drift-based RPCs correction was optimal showing comparable accuracy of less than 1.5 pixels with less GCPs compared to the affine model.

• Korean Journal of Organic Agriculture
• /
• v.9 no.3
• /
• pp.103-117
• /
• 2001

This study was inducted to investigate the effects of microbial fertilizers on the fields of young radish(Raphanus sativus L.), chemical components of plant and soil, and the microbial floras. Six microbial fertilizers, MPK+Husk+Palma, Husk+Palma, MPK+Compost, Compost, BIO Livestock Clean System(BLCS) cattle dropping, and Tomi were used. The yields of young radish were increased in six microbial fertilizer treatments. The fresh matter weight, the number of leaves, and the dry matter weight of young radish in BLCS cattle dropping treatment, the leaf length in MPK+Husk+Palma treatment, the sugar content in Husk+Palma treatment, arid the leaf width in Tomi treatment showed the highest amount, respectively. The effects of microbial fertilizers on chemical characteristics of young radish and soil were examined. Phosphoric acid amount of young radish in Tomi treatment was much higher than other treatments. Potassium amount of young radish showed high significance in all microbial fertilizer treatments compared with control, and shoved the highest in Compost treatment . Two components, phosphoric acid find potassium, in soil inoculated by microbial fertilizers showed significant. Phosphoric acid in the Tomi treatment and Potassium in Husk+Palma treatment were increased. The microorganic populations in soil inoculated with microbial fertilizers were examined. While the number of Bacillus in ceil was increased in MPK+Husk+Palma treatment, the numbers of total bacteria, actinomycetes, and fungi were increased in Tomi treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.370-370
• /
• 2012

Feature size of Cu interconnects keep shrinking into several tens of nanometer level. For this reason, the Cu interconnects face challenging issues such as increase of electro-migration, line-width dependent electrical resistivity increase, and gap-filling difficulty in high aspect ratio structures. As the thickness of the Cu film decreases below 30 nm, the electrical resistivity is not any more constant, but rather exponential. Research on alloying with other elements have been started to inhibit such escalation in the electrical resistivity. A faint trace of Al added in Cu film by sputtering was reported to contribute to suppression of the increase of the electrical resistivity. From an industrial point of view, we introduced cyclic metal organic chemical vapor deposition (MOCVD) in order to control Al concentration in the Cu film more easily by controlling the delivery time ratio of Cu and Al precursors. The amount of alloying element could be lowered at level of below 1 at%. Process of the alloy formation was applied into gap-filling to evaluate the performance of the gap-filling. Voidless gap-filling even into high aspect ratio trenches was achieved. In-depth analysis will be discussed in detail.

• Laser Solutions
• /
• v.18 no.3
• /
• pp.14-19
• /
• 2015

A helical fabricating method using $CO_2$ laser was utilized for producing cone-shaped structure on a silica substrate. Output power and the number of scanning radiation were modified in order to control the structure. The experiment shows that the depth and width of cone-shape were increased with higher output power of the laser and the number of scanning. We demonstrate fabrication of multidirectional side-firing optical fiber with diameter of 440 um using the $CO_2$ laser fabrication technique.

• Laser Solutions
• /
• v.15 no.4
• /
• pp.12-15
• /
• 2012

On behalf of the existing semiconductor process, the electronic devices to low-cost mass production to mass print the way, the research for development of roll-to-roll printing process is actively underway. This study was performed in about the research on the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser imprinting technology was used to create printable roll, and after coating copper on the surface of steel and thereon after coating polymer, after removing the polymer on the surface of roll, the printable roll was made. The laser system and roll feeder system were constructed and control program was developed. We has found the optimal conditions to perform laser patterning experiments using a system developed and We can make the minimum line width of 18 ${\mu}m$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.1
• /
• pp.31-40
• /
• 2000

This study was conducted to investigate the effects of application levels of swine manure fermented with sawdust(SMFS) and degree of the slope on productivity of corn, and nitrogen and organic matter runoff in corn cultivation soil. Main plots were consisted of the degree of slope, such as 0, 5 and 10, and the subplots consisted of application levels of SMFS, such as control, 200kgNha and 400kgNha. Lysimeter was constructed with 0.33m width, 3m length and 0.4m height. Dry matter(DM) yields of corn decreased as the slope increased but there was no significant differences between the degree of the slope. DM yields increased significantly as application levels of SMFS increased (pc0.05). DM yields decreased according to continuous cultivation of corn. Total nitrogen(TN) contents of the whole corn decreased as the slope increased(p<0.05). TN content in SMFS treatments was higher than that of non-SMFS treatment but there was no significantly different between SMFS treatments. TN yields decreased significantly as the slope and the application level of SMFS increased(p<0.05). Nitrogen and organic matter yields in the runoff waters increased as the slope and application levels of SMFS increased. The runoff of nitrogen and organic matter was more affected by the increase of the slope than application levels of SMFS. (Key words : Corn, Runoff, Swine manure, Degree of slope, Lysimeter)

• Journal of Life Science
• /
• v.20 no.6
• /
• pp.960-963
• /
• 2010

To evaluate whether chaff vinegar liquor (CVL) has potential in ameliorating allergic symptoms in mice, we tested the anti-allergic activities with a DNFB (dinitrofluorobenzene)-induced allergic mouse model. The DNFB-induced allergic symptoms were reduced by 20% compared to the control by chaff vinegar liquor supplemented with Perilla frutescens var. acuta. Allergic symptoms were examined by measuring the width of epidermis swelling. The hematoxyline & eosin (H&E) staining also revealed that the chaff vinegar liquor dramatically decreased the allergic symptoms in the epidermis of the ear. These results collectively suggest that the chaff vinegar liquor supplemented with P. frutescens var. acuta has potential in ameliorating allergic symptoms, showing that the liquor could be a useful biomaterial(s) for the nutraceutical or cosmetic industries.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.48-52
• /
• 2015

Control of polymer conformations in heterogeneous confinement plays an important role in natural and engineering processes. We present a simulation study on the conformational structure and dynamics of a single, flexible polymer in a dense array of nanoposts with different sizes and separations, especially, when the volume of the interstitial space formed between four nanoposts is less than the size of the polymer chain. When a polymer is placed in the array of nanoposts, the size of polymer increases compared with that in the absence of nanoposts due to the confinement effect. It is shown that when a polymer is confined in the array of nanoposts the chain is elongated in the direction parallel to the nanoposts. As the interstitial volume between four nanoposts decreases either by increasing the nanopost diameter or by decreasing the separation between nanoposts, the chain elongation becomes more pronounced. On the contrary, the polymer size varies in a non-monotonic fashion, with an initial elongation followed by a chain contraction, as the interstitial volume is reduced both by increasing the nanopost diameter and decreasing the separation at the same time while keeping constant the width of the passageway between two nanoposts. The simulation analysis shows that the non-monotonic dependence of polymer size is determined by interplay between the chain alignment along the nanoposts in each interstitial volume and the chain spreading through passageways over several interstitial volume.