• Asian Journal of Turfgrass Science
• /
• v.13 no.4
• /
• pp.191-200
• /
• 1999

The objective of this study was to improve the recycling rate of coal ash fly, industrial waste. This study was conducted to analyze the physico-chemical properties of \"CellCaSi\" and clarify the effects on the growth of Kentucky bluegrass(Poa pratensis L.) and creeping bentgrass(Agrostis paulstris Huds \"Penncross\") and the chemical properties of soil, which was cellular calcium silicate reproduced by coal ash fly. A field assay was carried out in Young-Pyong Golf Course. The results were as follows. 1. The main chemical composition of CellCaSi was $SiO_2$(45~55%) and CaO(25~35), which was 70~90% of total weight. CellCaSi showed pH 8~9. Bulk density of CellCaSi was 0.35~0.45g/㎤. Water content of CellCaSi was 52.5~67.5%. 2. In the applied plots, leaf width, grass density per $1\textrm{cm}^2$, rhizome number and length per plant, and root number per plant of Kentucky bluegrass(Poa pratensis L.) and creeping bentgrass(Agrostis paulstris Huds \"Penncross\") showed increasing tendency compared with the control. The application of CellCaSi increased the growth of turfgrasses. Their visual quality on hardness, grass shoot density per $1\textrm{cm}^2$ and root growth was very good. And, their visual quality on rhizome growth was good. 3. After the application of CellCaSi, pH, CEC, Ex-cation of the applied soil showed increasing tendency with the little range, $SiO_2$content increasing tendency considerably, and organic matter content decreasing tendency compared with the control.ncy compared with the control.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.299-305
• /
• 2017

Magnetic fluid, a new type of magnetic material, is a colloidal liquid constituted of nano-scale ferromagnetic particles suspended in carrier fluid. Magnetic fluid sealing is one of the most successful applications of magnetic fluid. As a new type of seal offering the advantages of no leakage, long life and high reliability, the magnetic fluid seal has been widely utilized under vacuum- and low-pressure-differential conditions. In practical applications, for improved pressure capacity, a multistage sealing structure is always used. However, in engineering applications, a uniform distribution of magnetic fluid under each tooth often cannot be achieved, which problem weakens the overall pressure capacity of the seals. In order to improve the pressure capacity of magnetic fluid seals and broaden their applications, the present study theoretically and experimentally analyzed the degree of non-uniform distribution of multistage magnetic fluid seals. A mathematical model reflecting the relationship between the pressure capacity and the distribution of magnetic fluid under a single tooth was constructed, and a formula showing the relationship between the volume of magnetic fluid and its contact width with the shaft was derived. Furthermore, the relationship of magnetic fluid volume to capacity was analyzed. Thereby, the causes of non-uniform distribution could be verified: injection of magnetic fluid; the assembly of magnetic fluid seals; the change of magnetic fluid silhouette under pressure loading; the magnetic fluid sealing mechanism of pressure transmission, and seal failure. In consideration of these causes, methods to improve the pressure capacity of magnetic fluid seals was devised (and is herein proposed).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.117-126
• /
• 2014

In this paper, we propose an efficient algorithm which can relocate the datablock of an aircraft when it is overlapped. If the datablock which represents the aircraft information in the control display is overlapped, relocation without overlapping is necessary because it is difficult to control the air traffic in this situation. The proposed algorithm relocates the data block with minimum movement by considering the characteristics of datablock. The moving distance of minimum movement is calculated using the height or width of rectangle which is created during overlapping. And the moving direction of minimum movement is calculated by considering the directivity of the datablock. When the distance between the target symbol and datablock is distant enough, the relocation is carried out using the existing algorithm as a special case. The proposed algorithm shows improved performance in comparison with the existing algorithm due to the fact that it considers many different cases of the datablock.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.319-323
• /
• 2011

In this paper presents a new model of dual-mode synchronous buck converter with dynamic control for mobile applications was proposed. The proposed circuit can operate at 2.5MHz with supply voltage 2.5V to 5V for low ripple and minimum inductor and capacitor size, which is suitable for single-cell lithium-ion battery supply mobile applications. For high efficiency, the proposed circuit adopts synchronous type and dynamic control. The proposed circuit is designed by using the device parameter of TSMC 0.18um BCD process and the performance is evaluated by Cadence spectre. Experimental board level results show the maximum conversion efficiency is 96% at 100mA load current.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.335-342
• /
• 2012

This paper is studied on a new DCM-ZVS step up-down AC-DC converter of high performance, that is, high system efficiency and power factor correction (PFC). The switching devices in the proposed converter are operated by soft switching technique using a new quasi-resonant circuit, and are driven with discontinuous conduction mode (DCM) according to pulse width modulation (PWM). The quasi-resonant circuit uses a step up-down inductor and a loss-less snubber capacitor. The proposed converter with DCM also simplifies the requirement of control circuits and reduces the number of control components. The input AC current waveform in the proposed converter becomes a quasi-sinusoidal waveform proportional to the magnitude of input AC voltage under constant switching frequency. As a result, the proposed converter obtains low switching power loss and high efficiency, and its input power factor is nearly in unity. The validity of the analytical findings is confirmed by some computer simulation results and experimental results.

• Journal of Wetlands Research
• /
• v.11 no.2
• /
• pp.1-7
• /
• 2009

In order to select the water flooding-tolerant trees among Korean oaks, we cultivated the sapling of 6 deciduous oak species, Quercus acutissima, Q. mongolica, Q. variabilis, Q. dentata, Q. aliena and Q. serrata, under the water flooding treatment and the control, and analysed the growth difference among them. For comparing the growth between treatment and control, we measured 13 morphological and ecological traits, such as leaf Leaf number, leaf length, leaf width, leaf area, shoot length, stem length, stem diameter, root length, plant length, leaf weight, stem weight, root weight, plant weight. Q. serrata have no growth difference between water flooding treatment and control, but the rest 5 species showed the growth reduction in water flooding treatment. Tolerance of oak species to water flooding was risen in order of Quercus acutissima, Q. mongolica, Q. variabilis, Q. dentata, Q. aliena and Q. serrata. Thus, among Korean deciduous oaks, it is desirable to plant Q. serrata for flood plain restoration of river.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2014

This study was carried out not only to identify the optimum concentrations of sulfur powder and citric acid treated for improving arsenic absorption of Pteris multifuda known as hyperaccumulator of arsenic, but also to develop arsenic purification model in the forest soil. After applying sulfur powder (0, 30, 45, $60g{\cdot}m^{-2}$) and citric acid (0, 200, 400, $800g{\cdot}m^{-2}$) in the forest soil contaminated with heavy metals, P. multifuda was planted and cultivated for 16 weeks. And then the growth and arsenic contents of plants were analyzed. In the result of research, the growth of P. mulifuda, except plant width, cultivated in soils treated with sulfur powder and citric acid was relatively lower than control. The accumulated amount of arsenic in aerial parts of P. multifuda ($1822.2mg{\cdot}kg^{-1}$) cultivated in soils treated with $200g{\cdot}m^{-2}$ citric acid was improved 62.5% against the control. And the accumulated amount of arsenic per 1 $m^2$ ($20.1mg{\cdot}m^{-2}$) was the greatest in $200g{\cdot}m^{-2}$ citric acid treatment. Translocation rate (TR) was higher in all acid treatment compare to control, and was the best in $200g{\cdot}m^{-2}$ citric acid treatment (0.95) especially. It showed that the arsenic absorbed in underground parts was transferred fast to aerial parts. Therefore, $200g{\cdot}m^{-2}$ citric acid treatment in the soil is recommended for arsenic purification using P. multifuda.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.197-204
• /
• 1993

This study was conducted to evaluate and compare the apical leakage in the following retrofilling techniques after apical resection; No apical cavity preparation and no retrofilling(control group), Amalgam(group I) or silver glass ionomer cement(group II) retrofilling after apical cavity preparation with mini contra-angle and bur, Amalgam(group III) or silver glass ionomer cement(group N) retrofilling after apical cavity preparation with ultrasonic micro endo tip. Extracted ninety upper anterior and lower canine teeth were fixed in skull simulators and root canals were prepared with step-back method and obturated with gutta-percha and zinc oxide eugenol sealer. Obturated roots were resected 2mm from apical ends and apical cavities of 1mm width and 2mm depth were prepared and retrofilled by above mentioned methods. After application of nail varnish on all surface except resected surface, apical 1/3 of the roots were placed in 1% methylene blue solution for 3 days. After longutudinal sectioning to expose central parts of filled materials, depths of penetrated dye were measured by measuring microscope and were analyzed statistically. The results were as follows. 1. Having no relation with instruments used in apical cavity preparation, amalgam retrofilling groups(group I and II) showed less apical leakage which was not significant statistically than no retrofilling group(control group) (P<0.05), but silver glass ionomer cement retrofilling gruoups(group II and IV) showed significantly less apical leakage than no retrofilling group(control group) (P<0.01). 2. In the groups retrofilled with the same material, the apical leakage in cavities prepared with ultrasonic micro endo tip (group III and IV) was less than that in cavities prepared with mini contra-angle and bur(group I and II), but not significant statistically(P>0.05). 3. When apical cavities were prepared with same instrument. the egroups retrofilled with silver glass ionomer cement(group II and IV) showed significantly less apical leakage than the groups retrofilled with amalgam(group I and III)(<0.01).

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.545-555
• /
• 2018

This study aimed to investigate the flexural behavior of precast concrete (PC) wall - steel shoe composite assemblies with various dry connection details at mid-span. Flexural tests were performed for five scenarios. Test parameters included the width of test specimens, arrangement of steel shoe connectors, and use of structural adhesive or waterproof tape at the mid-span joint. The test results showed that the PC wall - steel shoe composite assemblies joined at mid-span showed flexural damage patterns combined with rotational deformation, and the structural performance was satisfactory regardless of the arrangement of steel shoe connectors. Considering the two deformation components (flexural deformation by bending and rotational deformation due to joint opening), a theoretical model was proposed to analyze flexural strength and joint opening, and the simple model gave good predictions with acceptable accuracy.

• Clinical and Experimental Reproductive Medicine
• /
• v.48 no.3
• /
• pp.211-220
• /
• 2021

Objective: The present study aimed to investigate the possibility that curcumin (CMN) protects against methotrexate (MTX)-induced testicular damage by affecting the phospho-p38 (p-p38) mitogen-activated protein kinase (MAPK) and nuclear factor-kappa B (NF-κB) signaling pathways. Methods: Eighteen male Wistar albino rats were randomly divided into three groups. The control group was given an intragastric administration of dimethyl sulfoxide (DMSO) daily for 14 days, the MTX group was given a single intraperitoneal dose of MTX (20 mg/kg) on the 11th day, and the MTX+CMN group was given intragastric CMN (100 mg/kg/day, dissolved in DMSO) for 14 days and a single intraperitoneal dose of MTX (20 mg/kg) on the 11th day. At the end of the experiment, all animals were sacrificed and the testicular tissues were removed for morphometry, histology, and immunohistochemistry. Body and testicular weights were measured. Results: Body weights, seminiferous tubule diameter, and germinal epithelium height significantly decreased in the MTX group compared to the control group. Whereas, the number of histologically damaged seminiferous tubules and interstitial space width significantly increased in the MTX group. In addition, the number of p-p38 MAPK immunopositive cells and the immunoreactivity of NF-κB also increased in the MTX group compared to the control group. CMN improved loss of body weight, morphometric values, and histological damage due to MTX. CMN also reduced the number of p-p38 MAPK immunopositive cells and the NF-κB immunoreactivity. Conclusion: CMN may reduce MTX-induced testicular damage by suppressing the p38 MAPK and NF-κB signaling pathways.